[PATCH v2 08/66] dt-bindings: media: Add Allwinner A31 MIPI CSI-2 bindings documentation

[Paul Kocialkowski]

Hi Laurent,

Thanks for the review!

On Mon 07 Feb 22, 18:09, Laurent Pinchart wrote:
> Hi Paul,
> 
> Thank you for the patch.
> 
> On Sat, Feb 05, 2022 at 07:53:31PM +0100, Paul Kocialkowski wrote:
> > This introduces YAML bindings documentation for the Allwinner A31 MIPI
> > CSI-2 controller.
> > 
> > Signed-off-by: Paul Kocialkowski <paul.kocialkowski at bootlin.com>
> > Reviewed-by: Maxime Ripard <mripard at kernel.org>
> > Reviewed-by: Rob Herring <robh at kernel.org>
> > ---
> >  .../media/allwinner,sun6i-a31-mipi-csi2.yaml  | 142 ++++++++++++++++++
> >  1 file changed, 142 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml
> > new file mode 100644
> > index 000000000000..09207904b6db
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml
> > @@ -0,0 +1,142 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/allwinner,sun6i-a31-mipi-csi2.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Allwinner A31 MIPI CSI-2 Device Tree Bindings
> > +
> > +maintainers:
> > +  - Paul Kocialkowski <paul.kocialkowski at bootlin.com>
> > +
> > +properties:
> > +  compatible:
> > +    oneOf:
> > +      - const: allwinner,sun6i-a31-mipi-csi2
> > +      - items:
> > +          - const: allwinner,sun8i-v3s-mipi-csi2
> > +          - const: allwinner,sun6i-a31-mipi-csi2
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    items:
> > +      - description: Bus Clock
> > +      - description: Module Clock
> > +
> > +  clock-names:
> > +    items:
> > +      - const: bus
> > +      - const: mod
> > +
> > +  phys:
> > +    maxItems: 1
> > +    description: MIPI D-PHY
> > +
> > +  phy-names:
> > +    items:
> > +      - const: dphy
> > +
> > +  resets:
> > +    maxItems: 1
> > +
> > +  ports:
> > +    $ref: /schemas/graph.yaml#/properties/ports
> > +
> > +    properties:
> > +      port at 0:
> > +        $ref: /schemas/graph.yaml#/$defs/port-base
> > +        description: Input port, connect to a MIPI CSI-2 sensor
> > +
> > +        properties:
> > +          reg:
> > +            const: 0
> > +
> > +          endpoint:
> > +            $ref: video-interfaces.yaml#
> > +            unevaluatedProperties: false
> > +
> > +            properties:
> > +              data-lanes:
> > +                minItems: 1
> > +                maxItems: 4
> > +
> > +            required:
> > +              - data-lanes
> > +
> > +        additionalProperties: false
> > +
> > +      port at 1:
> > +        $ref: /schemas/graph.yaml#/$defs/port-base
> > +        description: Output port, connect to a CSI controller
> > +
> > +        properties:
> > +          reg:
> > +            const: 1
> > +
> > +          endpoint:
> > +            $ref: video-interfaces.yaml#
> > +            unevaluatedProperties: false
> > +
> > +        additionalProperties: false
> 
> The two ports should be required.

Agreed.

> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - clocks
> > +  - clock-names
> > +  - phys
> > +  - phy-names
> 
> And ports should be required here.

Sure!

Thanks,

Paul

> Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
>
> > +  - resets
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    #include <dt-bindings/clock/sun8i-v3s-ccu.h>
> > +    #include <dt-bindings/reset/sun8i-v3s-ccu.h>
> > +
> > +    mipi_csi2: csi at 1cb1000 {
> > +        compatible = "allwinner,sun8i-v3s-mipi-csi2",
> > +                     "allwinner,sun6i-a31-mipi-csi2";
> > +        reg = <0x01cb1000 0x1000>;
> > +        interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
> > +        clocks = <&ccu CLK_BUS_CSI>,
> > +                 <&ccu CLK_CSI1_SCLK>;
> > +        clock-names = "bus", "mod";
> > +        resets = <&ccu RST_BUS_CSI>;
> > +
> > +        phys = <&dphy>;
> > +        phy-names = "dphy";
> > +
> > +        ports {
> > +            #address-cells = <1>;
> > +            #size-cells = <0>;
> > +
> > +            mipi_csi2_in: port at 0 {
> > +                reg = <0>;
> > +
> > +                mipi_csi2_in_ov5648: endpoint {
> > +                    data-lanes = <1 2 3 4>;
> > +
> > +                    remote-endpoint = <&ov5648_out_mipi_csi2>;
> > +                };
> > +            };
> > +
> > +            mipi_csi2_out: port at 1 {
> > +                reg = <1>;
> > +
> > +                mipi_csi2_out_csi0: endpoint {
> > +                    remote-endpoint = <&csi0_in_mipi_csi2>;
> > +                };
> > +            };
> > +        };
> > +    };
> > +
> > +...
> 
> -- 
> Regards,
> 
> Laurent Pinchart

-- 
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-phy/attachments/20220211/95b41301/attachment-0001.sig>