[PATCH v10 15/18] phy: sun4i-usb: Add support for the H616 USB PHY

[Andre Przywara]

The USB PHY used in the Allwinner H616 SoC inherits some traits from its
various predecessors: it has four full PHYs like the H3, needs some
extra bits to be set like the H6, and puts SIDDQ on a different bit like
the A100. Plus it needs this weird PHY2 quirk.

Name all those properties in a new config struct and assign a new
compatible name to it.

Signed-off-by: Andre Przywara <andre.przywara at arm.com>
---
 drivers/phy/allwinner/phy-sun4i-usb.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c
index 316ef5fca831..85a9771280b7 100644
--- a/drivers/phy/allwinner/phy-sun4i-usb.c
+++ b/drivers/phy/allwinner/phy-sun4i-usb.c
@@ -1024,6 +1024,17 @@ static const struct sun4i_usb_phy_cfg sun50i_h6_cfg = {
 	.missing_phys = BIT(1) | BIT(2),
 };
 
+static const struct sun4i_usb_phy_cfg sun50i_h616_cfg = {
+	.num_phys = 4,
+	.type = sun50i_h6_phy,
+	.disc_thresh = 3,
+	.phyctl_offset = REG_PHYCTL_A33,
+	.dedicated_clocks = true,
+	.phy0_dual_route = true,
+	.hci_phy_ctl_clear = PHY_CTL_SIDDQ,
+	.needs_phy2_siddq = true,
+};
+
 static const struct of_device_id sun4i_usb_phy_of_match[] = {
 	{ .compatible = "allwinner,sun4i-a10-usb-phy", .data = &sun4i_a10_cfg },
 	{ .compatible = "allwinner,sun5i-a13-usb-phy", .data = &sun5i_a13_cfg },
@@ -1038,6 +1049,7 @@ static const struct of_device_id sun4i_usb_phy_of_match[] = {
 	{ .compatible = "allwinner,sun50i-a64-usb-phy",
 	  .data = &sun50i_a64_cfg},
 	{ .compatible = "allwinner,sun50i-h6-usb-phy", .data = &sun50i_h6_cfg },
+	{ .compatible = "allwinner,sun50i-h616-usb-phy", .data = &sun50i_h616_cfg },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match);
-- 
2.25.1