[PATCH v2 22/66] media: sun6i-csi: Use runtime pm for clocks and reset

[Maxime Ripard]

On Sat, Feb 05, 2022 at 07:53:45PM +0100, Paul Kocialkowski wrote:
> Wrap the clock and reset preparation into runtime pm functions
> for better organization of the code.
> 
> Signed-off-by: Paul Kocialkowski <paul.kocialkowski at bootlin.com>
> ---
>  .../platform/sunxi/sun6i-csi/sun6i_csi.c      | 94 ++++++++++++++-----
>  1 file changed, 69 insertions(+), 25 deletions(-)
> 
> diff --git a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
> index 2355088fdc37..b53b92b70a89 100644
> --- a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
> +++ b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
> @@ -152,40 +152,18 @@ int sun6i_csi_set_power(struct sun6i_csi_device *csi_dev, bool enable)
>  
>  	if (!enable) {
>  		regmap_update_bits(regmap, CSI_EN_REG, CSI_EN_CSI_EN, 0);
> +		pm_runtime_put(dev);
>  
> -		clk_disable_unprepare(csi_dev->clk_ram);
> -		clk_disable_unprepare(csi_dev->clk_mod);
> -		reset_control_assert(csi_dev->reset);
>  		return 0;
>  	}
>  
> -	ret = clk_prepare_enable(csi_dev->clk_mod);
> -	if (ret) {
> -		dev_err(csi_dev->dev, "Enable csi clk err %d\n", ret);
> +	ret = pm_runtime_resume_and_get(dev);
> +	if (ret < 0)
>  		return ret;
> -	}
> -
> -	ret = clk_prepare_enable(csi_dev->clk_ram);
> -	if (ret) {
> -		dev_err(csi_dev->dev, "Enable clk_dram_csi clk err %d\n", ret);
> -		goto clk_mod_disable;
> -	}
> -
> -	ret = reset_control_deassert(csi_dev->reset);
> -	if (ret) {
> -		dev_err(csi_dev->dev, "reset err %d\n", ret);
> -		goto clk_ram_disable;
> -	}
>  
>  	regmap_update_bits(regmap, CSI_EN_REG, CSI_EN_CSI_EN, CSI_EN_CSI_EN);
>  
>  	return 0;
> -
> -clk_ram_disable:
> -	clk_disable_unprepare(csi_dev->clk_ram);
> -clk_mod_disable:
> -	clk_disable_unprepare(csi_dev->clk_mod);
> -	return ret;
>  }
>  
>  static enum csi_input_fmt get_csi_input_format(struct sun6i_csi_device *csi_dev,
> @@ -800,6 +778,65 @@ static irqreturn_t sun6i_csi_isr(int irq, void *private)
>  	return IRQ_HANDLED;
>  }
>  
> +static int sun6i_csi_suspend(struct device *dev)
> +{
> +	struct sun6i_csi_device *csi_dev = dev_get_drvdata(dev);
> +
> +	reset_control_assert(csi_dev->reset);
> +	clk_disable_unprepare(csi_dev->clk_ram);
> +	clk_disable_unprepare(csi_dev->clk_mod);
> +	clk_disable_unprepare(csi_dev->clk_bus);
> +
> +	return 0;
> +}
> +
> +static int sun6i_csi_resume(struct device *dev)
> +{
> +	struct sun6i_csi_device *csi_dev = dev_get_drvdata(dev);
> +	int ret;
> +
> +	ret = reset_control_deassert(csi_dev->reset);
> +	if (ret) {
> +		dev_err(dev, "failed to deassert reset\n");
> +		return ret;
> +	}
> +
> +	ret = clk_prepare_enable(csi_dev->clk_bus);
> +	if (ret) {
> +		dev_err(dev, "failed to enable bus clock\n");
> +		goto error_reset;
> +	}
> +
> +	ret = clk_prepare_enable(csi_dev->clk_mod);
> +	if (ret) {
> +		dev_err(dev, "failed to enable module clock\n");
> +		goto error_clk_bus;
> +	}
> +
> +	ret = clk_prepare_enable(csi_dev->clk_ram);
> +	if (ret) {
> +		dev_err(dev, "failed to enable ram clock\n");
> +		goto error_clk_mod;
> +	}
> +
> +	return 0;

You've change the order of the reset vs clock initialization. Also, does
that work with CONFIG_PM disabled?

Maxime
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-phy/attachments/20220209/c0403bd1/attachment-0001.sig>