[PATCH v2 21/66] media: sun6i-csi: Always set exclusive module clock rate
Paul Kocialkowski
paul.kocialkowski at bootlin.com
Sat Feb 5 10:53:44 PST 2022
In some situations the default rate of the module clock is not the
required one for operation (for example when reconfiguring the clock
tree to use a different parent). As a result, always set the correct
rate for the clock (and take care of cleanup).
Signed-off-by: Paul Kocialkowski <paul.kocialkowski at bootlin.com>
---
.../platform/sunxi/sun6i-csi/sun6i_csi.c | 54 ++++++++++++++-----
1 file changed, 41 insertions(+), 13 deletions(-)
diff --git a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
index 8155e9560164..2355088fdc37 100644
--- a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
+++ b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
@@ -154,9 +154,6 @@ int sun6i_csi_set_power(struct sun6i_csi_device *csi_dev, bool enable)
regmap_update_bits(regmap, CSI_EN_REG, CSI_EN_CSI_EN, 0);
clk_disable_unprepare(csi_dev->clk_ram);
- if (of_device_is_compatible(dev->of_node,
- "allwinner,sun50i-a64-csi"))
- clk_rate_exclusive_put(csi_dev->clk_mod);
clk_disable_unprepare(csi_dev->clk_mod);
reset_control_assert(csi_dev->reset);
return 0;
@@ -168,9 +165,6 @@ int sun6i_csi_set_power(struct sun6i_csi_device *csi_dev, bool enable)
return ret;
}
- if (of_device_is_compatible(dev->of_node, "allwinner,sun50i-a64-csi"))
- clk_set_rate_exclusive(csi_dev->clk_mod, 300000000);
-
ret = clk_prepare_enable(csi_dev->clk_ram);
if (ret) {
dev_err(csi_dev->dev, "Enable clk_dram_csi clk err %d\n", ret);
@@ -190,8 +184,6 @@ int sun6i_csi_set_power(struct sun6i_csi_device *csi_dev, bool enable)
clk_ram_disable:
clk_disable_unprepare(csi_dev->clk_ram);
clk_mod_disable:
- if (of_device_is_compatible(dev->of_node, "allwinner,sun50i-a64-csi"))
- clk_rate_exclusive_put(csi_dev->clk_mod);
clk_disable_unprepare(csi_dev->clk_mod);
return ret;
}
@@ -819,6 +811,7 @@ static int sun6i_csi_resources_setup(struct sun6i_csi_device *csi_dev,
struct platform_device *platform_dev)
{
struct device *dev = csi_dev->dev;
+ unsigned long clk_mod_rate;
void __iomem *io_base;
int ret;
int irq;
@@ -856,28 +849,53 @@ static int sun6i_csi_resources_setup(struct sun6i_csi_device *csi_dev,
return PTR_ERR(csi_dev->clk_ram);
}
+ if (of_device_is_compatible(dev->of_node, "allwinner,sun50i-a64-csi"))
+ clk_mod_rate = 300000000;
+ else
+ clk_mod_rate = 297000000;
+
+ ret = clk_set_rate_exclusive(csi_dev->clk_mod, clk_mod_rate);
+ if (ret) {
+ dev_err(dev, "failed to set mod clock rate\n");
+ return ret;
+ }
+
/* Reset */
csi_dev->reset = devm_reset_control_get_shared(dev, NULL);
if (IS_ERR(csi_dev->reset)) {
dev_err(dev, "failed to acquire reset\n");
- return PTR_ERR(csi_dev->reset);
+ ret = PTR_ERR(csi_dev->reset);
+ goto error_clk_rate_exclusive;
}
/* Interrupt */
irq = platform_get_irq(platform_dev, 0);
- if (irq < 0)
- return -ENXIO;
+ if (irq < 0) {
+ dev_err(dev, "failed to get interrupt\n");
+ ret = -ENXIO;
+ goto error_clk_rate_exclusive;
+ }
ret = devm_request_irq(dev, irq, sun6i_csi_isr, 0, SUN6I_CSI_NAME,
csi_dev);
if (ret) {
dev_err(dev, "failed to request interrupt\n");
- return ret;
+ goto error_clk_rate_exclusive;
}
return 0;
+
+error_clk_rate_exclusive:
+ clk_rate_exclusive_put(csi_dev->clk_mod);
+
+ return ret;
+}
+
+static void sun6i_csi_resources_cleanup(struct sun6i_csi_device *csi_dev)
+{
+ clk_rate_exclusive_put(csi_dev->clk_mod);
}
static int sun6i_csi_probe(struct platform_device *platform_dev)
@@ -897,7 +915,16 @@ static int sun6i_csi_probe(struct platform_device *platform_dev)
if (ret)
return ret;
- return sun6i_csi_v4l2_init(csi_dev);
+ ret = sun6i_csi_v4l2_init(csi_dev);
+ if (ret)
+ goto error_resources;
+
+ return 0;
+
+error_resources:
+ sun6i_csi_resources_cleanup(csi_dev);
+
+ return ret;
}
static int sun6i_csi_remove(struct platform_device *pdev)
@@ -905,6 +932,7 @@ static int sun6i_csi_remove(struct platform_device *pdev)
struct sun6i_csi_device *csi_dev = platform_get_drvdata(pdev);
sun6i_csi_v4l2_cleanup(csi_dev);
+ sun6i_csi_resources_cleanup(csi_dev);
return 0;
}
--
2.34.1
More information about the linux-phy
mailing list