[PATCH v5 1/4] dt-bindings: media: Document bindings for DW MIPI CSI-2 Host

[Eugen.Hristev at microchip.com]

On 12/20/22 16:16, Krzysztof Kozlowski wrote:
> On 16/12/2022 15:37, Eugen Hristev wrote:
>> Add bindings for Synopsys DesignWare MIPI CSI-2 host.
>>
>> Signed-off-by: Luis Oliveira <lolivei at synopsys.com>
>> [eugen.hristev at microchip.com: reworked binding, converted to yaml]
>> Signed-off-by: Eugen Hristev <eugen.hristev at microchip.com>
>> ---
> 
> 1. Please use scripts/get_maintainers.pl to get a list of necessary
> people and lists to CC.  It might happen, that command when run on an
> older kernel, gives you outdated entries.  Therefore please be sure you
> base your patches on recent Linux kernel.
> 
> You did not CC anyone, so who is supposed to take this patch?

Hi Krzysztof,

Thanks for looking at this . To answer you : nobody . Please read the 
cover letter , I am sending this to publish my work on this driver, as 
it may help someone out there.

Eugen

> 
> 2. Subject: drop second, redundant "bindings for".
> 
>>   .../bindings/media/snps,dw-csi.yaml           | 149 ++++++++++++++++++
>>   1 file changed, 149 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/media/snps,dw-csi.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/media/snps,dw-csi.yaml b/Documentation/devicetree/bindings/media/snps,dw-csi.yaml
>> new file mode 100644
>> index 000000000000..439eadc8e517
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/media/snps,dw-csi.yaml
>> @@ -0,0 +1,149 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/media/snps,dw-csi.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Synopsys DesignWare CSI-2 Host controller (csi2host)
>> +
>> +maintainers:
>> +  - Eugen Hristev <eugen.hristev at microchip.com>
>> +
>> +description:
>> +  CSI2HOST is used to receive image coming from an MIPI CSI-2 compatible
>> +  camera. It will convert the incoming CSI-2 stream into a dedicated
>> +  interface called the Synopsys IDI (Image Data Interface).
>> +  This interface is a 32-bit SoC internal only, and can be assimilated
>> +  with a CSI-2 interface.
>> +
>> +properties:
>> +  compatible:
>> +    const: snps,dw-csi
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  clocks:
>> +    maxItems: 2
>> +
>> +  clock-names:
>> +    description:
>> +      CSI2HOST can have two clocks connected. One clock is the
>> +      peripheral clock for the inside functionality of the hardware block.
>> +      This is named 'perclk'. The second clock can be the phy clock,
>> +      which is used to clock the phy via an internal link.
>> +      This clock is named 'phyclk', phy clock.
>> +    items:
>> +      - const: perclk
>> +      - const: phyclk
> 
> Drop "clk" from both
> 
> 
>> +
>> +  phys:
>> +    maxItems: 1
>> +    description: MIPI D-PHY
>> +
>> +  phy-names:
>> +    items:
>> +      - const: dphy
>> +
>> +  resets:
>> +    maxItems: 1
>> +
>> +  interrupts:
>> +    maxItems: 1
>> +
>> +  ports:
>> +    $ref: /schemas/graph.yaml#/properties/ports
>> +
>> +    properties:
>> +      port at 0:
>> +        $ref: /schemas/graph.yaml#/$defs/port-base
>> +        unevaluatedProperties: false
>> +        description:
>> +          Input port node, single endpoint describing the input port.
>> +
>> +        properties:
>> +          endpoint:
>> +            $ref: video-interfaces.yaml#
>> +            unevaluatedProperties: false
>> +            description: Endpoint connected to input device
>> +
>> +            properties:
>> +              bus-type:
>> +                const: 4
>> +
>> +              data-lanes:
>> +                minItems: 1
>> +                maxItems: 4
>> +                items:
>> +                  maximum: 4
>> +
>> +              clock-lanes:
>> +                maxItems: 1
>> +
>> +              remote-endpoint: true
>> +
>> +      port at 1:
>> +        $ref: /schemas/graph.yaml#/$defs/port-base
>> +        unevaluatedProperties: false
>> +        description:
>> +          Output port node, single endpoint describing the output port.
>> +
>> +        properties:
>> +          endpoint:
>> +            unevaluatedProperties: false
>> +            $ref: video-interfaces.yaml#
>> +            description: Endpoint connected to output device
>> +
>> +            properties:
>> +              bus-type:
>> +                const: 4
>> +
>> +              remote-endpoint: true
>> +
>> +    required:
>> +      - port at 0
>> +      - port at 1
>> +
>> +additionalProperties: false
>> +
>> +required:
>> +  - compatible
>> +  - ports
> 
> reg? phys? interrupts? All others?
> 
>> +
>> +examples:
>> +  - |
>> +    csi2: csi2 at 3000 {
> 
> Generic node names, so "csi"
> 
>> +        compatible = "snps,dw-csi";
>> +        reg = <0x03000 0x7FF>;
> 
> lowercase hex
> 
>> +        phys = <&mipi_dphy_rx>;
>> +        phy-names = "dphy";
>> +        resets = <&dw_rst 1>;
>> +        interrupts = <2>;
>> +
> 
> Best regards,
> Krzysztof
>