[PATCH 1/3] dt-bindings: phy: qcom,pcie2-phy: convert to YAML format

[Krzysztof Kozlowski]

On 17/12/2022 00:40, Dmitry Baryshkov wrote:
> Convert the bindings for the Qualcomm PCIe2 PHY into the YAML format
> from the text description.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> ---
>  .../bindings/phy/qcom,pcie2-phy.yaml          | 87 +++++++++++++++++++
>  .../bindings/phy/qcom-pcie2-phy.txt           | 42 ---------
>  2 files changed, 87 insertions(+), 42 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/phy/qcom,pcie2-phy.yaml
>  delete mode 100644 Documentation/devicetree/bindings/phy/qcom-pcie2-phy.txt
> 
> diff --git a/Documentation/devicetree/bindings/phy/qcom,pcie2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,pcie2-phy.yaml
> new file mode 100644
> index 000000000000..497850a5b428
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/qcom,pcie2-phy.yaml
> @@ -0,0 +1,87 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/qcom,pcie2-phy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm PCIe2 PHY controller
> +
> +maintainers:
> +  - Vinod Koul <vkoul at kernel.org>
> +
> +description:
> +  The Qualcomm PCIe2 PHY is a Synopsys based phy found in a number of Qualcomm
> +  platforms.
> +
> +properties:
> +  compatible:
> +    items:
> +      - const: qcom,qcs404-pcie2-phy
> +      - const: qcom,pcie2-phy
> +
> +  reg:
> +    items:
> +      - description: PHY register set
> +
> +  clocks:
> +    items:
> +      - description: a clock-specifier pair for the "pipe" clock
> +
> +  "#phy-cells":
> +    const: 0
> +
> +  vdda-vp-supply:
> +    description: phandle to low voltage regulator

Drop "phandle to"

> +
> +  vdda-vph-supply:
> +    description: phandle to high voltage regulator

Drop "phandle to"


> +
> +  resets:
> +    maxItems: 2
> +
> +  reset-names:
> +    items:
> +      - const: phy
> +      - const: pipe

Blank line

> +  "#clock-cells":
> +    const: 0
> +
> +  clock-output-names:
> +    maxItems: 1

Maybe keep both next to "clocks"? And same order in "required:".

> +
> +required:
> +  - compatible
> +  - reg
> +  - "#phy-cells"
> +  - clocks
> +  - vdda-vp-supply
> +  - vdda-vph-supply
> +  - resets
> +  - reset-names
> +  - clock-output-names
> +  - "#clock-cells"
> +


Best regards,
Krzysztof