Re: [PATCH v4 11/23] phy: qcom-qmp-ufs: Add HS G4 mode support to SM8450 SoC

[Dmitry Baryshkov]

On 1 December 2022 20:43:16 GMT+03:00, Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org> wrote:
>UFS PHY in SM8450 SoC is capable of operating at HS G4 mode and the init
>sequence is compatible with SM8350. Hence, add the tbls_hs_g4 instance
>reusing the G4 init sequence of SM8350.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>

>
>Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
>---
> drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
>diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
>index 75e55c4181c9..96e03d4249da 100644
>--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
>+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
>@@ -935,6 +935,14 @@ static const struct qmp_phy_cfg sm8450_ufsphy_cfg = {
> 		.serdes		= sm8350_ufsphy_hs_b_serdes,
> 		.serdes_num	= ARRAY_SIZE(sm8350_ufsphy_hs_b_serdes),
> 	},
>+	.tbls_hs_g4 = {
>+		.tx		= sm8350_ufsphy_g4_tx,
>+		.tx_num		= ARRAY_SIZE(sm8350_ufsphy_g4_tx),
>+		.rx		= sm8350_ufsphy_g4_rx,
>+		.rx_num		= ARRAY_SIZE(sm8350_ufsphy_g4_rx),
>+		.pcs		= sm8350_ufsphy_g4_pcs,
>+		.pcs_num	= ARRAY_SIZE(sm8350_ufsphy_g4_pcs),
>+	},
> 	.clk_list		= sm8450_ufs_phy_clk_l,
> 	.num_clks		= ARRAY_SIZE(sm8450_ufs_phy_clk_l),
> 	.vreg_list		= qmp_phy_vreg_l,

-- 
With best wishes
Dmitry