Re: [PATCH v4 10/23] phy: qcom-qmp-ufs: Add HS G4 mode support to SM8350 SoC

[Dmitry Baryshkov]

On 1 December 2022 20:43:15 GMT+03:00, Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org> wrote:
>UFS PHY in SM8350 SoC is capable of operating at HS G4 mode. Hence, add the
>required register settings using the tables_hs_g4 struct instance.


Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>

>
>Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
>---
> drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 36 +++++++++++++++++++++++++
> 1 file changed, 36 insertions(+)
>
>diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
>index 6c7c6a06fe3b..75e55c4181c9 100644
>--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
>+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
>@@ -571,6 +571,34 @@ static const struct qmp_phy_init_tbl sm8350_ufsphy_pcs[] = {
> 	QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
> };
> 
>+static const struct qmp_phy_init_tbl sm8350_ufsphy_g4_tx[] = {
>+	QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0xe5),
>+};
>+
>+static const struct qmp_phy_init_tbl sm8350_ufsphy_g4_rx[] = {
>+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CTRL2, 0x81),
>+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_TERM_BW, 0x6f),
>+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x00),
>+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
>+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
>+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_MEASURE_TIME, 0x20),
>+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_LOW, 0x80),
>+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_HIGH, 0x01),
>+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0xbf),
>+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0xbf),
>+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0x7f),
>+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x7f),
>+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0x2d),
>+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0x6d),
>+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0x6d),
>+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xed),
>+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0x3c),
>+};
>+
>+static const struct qmp_phy_init_tbl sm8350_ufsphy_g4_pcs[] = {
>+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_BIST_FIXED_PAT_CTRL, 0x0a),
>+};
>+
> struct qmp_ufs_offsets {
> 	u16 serdes;
> 	u16 pcs;
>@@ -875,6 +903,14 @@ static const struct qmp_phy_cfg sm8350_ufsphy_cfg = {
> 		.serdes		= sm8350_ufsphy_hs_b_serdes,
> 		.serdes_num	= ARRAY_SIZE(sm8350_ufsphy_hs_b_serdes),
> 	},
>+	.tbls_hs_g4 = {
>+		.tx		= sm8350_ufsphy_g4_tx,
>+		.tx_num		= ARRAY_SIZE(sm8350_ufsphy_g4_tx),
>+		.rx		= sm8350_ufsphy_g4_rx,
>+		.rx_num		= ARRAY_SIZE(sm8350_ufsphy_g4_rx),
>+		.pcs		= sm8350_ufsphy_g4_pcs,
>+		.pcs_num	= ARRAY_SIZE(sm8350_ufsphy_g4_pcs),
>+	},
> 	.clk_list		= sdm845_ufs_phy_clk_l,
> 	.num_clks		= ARRAY_SIZE(sdm845_ufs_phy_clk_l),
> 	.vreg_list		= qmp_phy_vreg_l,

-- 
With best wishes
Dmitry