Re: [PATCH v4 07/23] phy: qcom-qmp-ufs: Add HS G4 mode support to SM8150 SoC

Dmitry Baryshkov dmitry.baryshkov at linaro.org
Mon Dec 5 13:52:11 PST 2022



On 1 December 2022 20:43:12 GMT+03:00, Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org> wrote:
>UFS PHY in SM8150 SoC is capable of operating at HS G4 mode. Hence, add the
>required register settings using the tables_hs_g4 struct instance.
>
>Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>

>---
> drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 36 +++++++++++++++++++++++++
> 1 file changed, 36 insertions(+)
>
>diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
>index 97d0baa9bac3..269f96a0f752 100644
>--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
>+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
>@@ -374,6 +374,10 @@ static const struct qmp_phy_init_tbl sm8150_ufsphy_tx[] = {
> 	QMP_PHY_INIT_CFG(QSERDES_V4_TX_TRAN_DRVR_EMP_EN, 0x0c),
> };
> 
>+static const struct qmp_phy_init_tbl sm8150_ufsphy_hs_g4_tx[] = {
>+	QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x75),
>+};
>+
> static const struct qmp_phy_init_tbl sm8150_ufsphy_rx[] = {
> 	QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_LVL, 0x24),
> 	QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x0f),
>@@ -411,6 +415,25 @@ static const struct qmp_phy_init_tbl sm8150_ufsphy_rx[] = {
> 	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH4, 0xb1),
> };
> 
>+static const struct qmp_phy_init_tbl sm8150_ufsphy_hs_g4_rx[] = {
>+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x5a),
>+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CTRL2, 0x81),
>+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0e),
>+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_TERM_BW, 0x6f),
>+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_MEASURE_TIME, 0x20),
>+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0x80),
>+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x01),
>+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x3f),
>+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xff),
>+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xff),
>+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
>+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x6c),
>+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0x6d),
>+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0x6d),
>+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xed),
>+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0x3c),
>+};
>+
> static const struct qmp_phy_init_tbl sm8150_ufsphy_pcs[] = {
> 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_RX_SIGDET_CTRL2, 0x6d),
> 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0a),
>@@ -421,6 +444,11 @@ static const struct qmp_phy_init_tbl sm8150_ufsphy_pcs[] = {
> 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
> };
> 
>+static const struct qmp_phy_init_tbl sm8150_ufsphy_hs_g4_pcs[] = {
>+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x10),
>+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_BIST_FIXED_PAT_CTRL, 0x0a),
>+};
>+
> static const struct qmp_phy_init_tbl sm8350_ufsphy_serdes[] = {
> 	QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0xd9),
> 	QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_SEL, 0x11),
>@@ -762,6 +790,14 @@ static const struct qmp_phy_cfg sm8150_ufsphy_cfg = {
> 		.serdes		= sm8150_ufsphy_hs_b_serdes,
> 		.serdes_num	= ARRAY_SIZE(sm8150_ufsphy_hs_b_serdes),
> 	},
>+	.tbls_hs_g4 = {
>+		.tx		= sm8150_ufsphy_hs_g4_tx,
>+		.tx_num		= ARRAY_SIZE(sm8150_ufsphy_hs_g4_tx),
>+		.rx		= sm8150_ufsphy_hs_g4_rx,
>+		.rx_num		= ARRAY_SIZE(sm8150_ufsphy_hs_g4_rx),
>+		.pcs		= sm8150_ufsphy_hs_g4_pcs,
>+		.pcs_num	= ARRAY_SIZE(sm8150_ufsphy_hs_g4_pcs),
>+	},
> 	.clk_list		= sdm845_ufs_phy_clk_l,
> 	.num_clks		= ARRAY_SIZE(sdm845_ufs_phy_clk_l),
> 	.vreg_list		= qmp_phy_vreg_l,

-- 
With best wishes
Dmitry



More information about the linux-phy mailing list