[PATCH v2 2/3] phy: qcom-qmp: fix reset-controller leak on probe errors
Johan Hovold
johan+linaro at kernel.org
Tue Apr 26 23:32:42 PDT 2022
Make sure to release the lane reset controller in case of a late probe
error (e.g. probe deferral).
Note that due to the reset controller being defined in devicetree in
"lane" child nodes, devm_reset_control_get_exclusive() cannot be used
directly.
Fixes: e78f3d15e115 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets")
Cc: stable at vger.kernel.org # 4.12
Cc: Vivek Gautam <vivek.gautam at codeaurora.org>
Reviewed-by: Philipp Zabel <p.zabel at pengutronix.de>
Signed-off-by: Johan Hovold <johan+linaro at kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index a84f7d1fc9b7..3f77830921f5 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -6005,6 +6005,11 @@ static const struct phy_ops qcom_qmp_pcie_ufs_ops = {
.owner = THIS_MODULE,
};
+static void qcom_qmp_reset_control_put(void *data)
+{
+ reset_control_put(data);
+}
+
static
int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id,
void __iomem *serdes, const struct qmp_phy_cfg *cfg)
@@ -6099,6 +6104,10 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id,
dev_err(dev, "failed to get lane%d reset\n", id);
return PTR_ERR(qphy->lane_rst);
}
+ ret = devm_add_action_or_reset(dev, qcom_qmp_reset_control_put,
+ qphy->lane_rst);
+ if (ret)
+ return ret;
}
if (cfg->type == PHY_TYPE_UFS || cfg->type == PHY_TYPE_PCIE)
--
2.35.1
More information about the linux-phy
mailing list