[PATCH resend v8 0/5] phy: phy-fsl-imx8-mipi-dphy: Add i.MX8qxp LVDS PHY mode support

[Vinod Koul]

On 19-04-22, 09:08, Liu Ying wrote:
> Hi,
> 
> This is the v8 series to add i.MX8qxp LVDS PHY mode support for the Mixel
> PHY in the Freescale i.MX8qxp SoC.
> 
> The Mixel PHY is MIPI DPHY + LVDS PHY combo, which can works in either
> MIPI DPHY mode or LVDS PHY mode.  The PHY mode is controlled by i.MX8qxp
> SCU firmware.  The PHY driver would call a SCU function to configure the
> mode.
> 
> The PHY driver is already supporting the Mixel MIPI DPHY in i.MX8mq SoC,
> where it appears to be a single MIPI DPHY.
> 
> 
> Patch 1/5 sets PHY mode in the Northwest Logic MIPI DSI host controller
> bridge driver, since i.MX8qxp SoC embeds this controller IP to support
> MIPI DSI displays together with the Mixel PHY.
> 
> Patch 2/5 allows LVDS PHYs to be configured through the generic PHY functions
> and through a custom structure added to the generic PHY configuration union.
> 
> Patch 3/5 converts mixel,mipi-dsi-phy plain text dt binding to json-schema.
> 
> Patch 4/5 adds dt binding support for the Mixel combo PHY in i.MX8qxp SoC.
> 
> Patch 5/5 adds the i.MX8qxp LVDS PHY mode support in the Mixel PHY driver.

Applied patch 2-5 to phy-next, thanks

-- 
~Vinod