[PATCH v3 4/4] arm64: dts: qcom: sm8450: Fix qmp phy node (use phy@ instead of lanes@)

Bhupesh Sharma bhupesh.sharma at linaro.org
Mon Apr 18 13:55:09 PDT 2022


Fix the following 'make dtbs_check' warning(s) by
using phy@ instead of lanes@:
arch/arm64/boot/dts/qcom/sm8450-hdk.dtb: phy at 1c0f000: 'lanes at 1c0e000'
  does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'

Cc: Bjorn Andersson <bjorn.andersson at linaro.org>
Cc: Rob Herring <robh at kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma at linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 2cfc67b75259..721bd9495eb6 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -851,7 +851,7 @@ pcie0_phy: phy at 1c06000 {
 
 			status = "disabled";
 
-			pcie0_lane: lanes at 1c06200 {
+			pcie0_lane: phy at 1c06200 {
 				reg = <0 0x1c06e00 0 0x200>, /* tx */
 				      <0 0x1c07000 0 0x200>, /* rx */
 				      <0 0x1c06200 0 0x200>, /* pcs */
@@ -958,7 +958,7 @@ pcie1_phy: phy at 1c0f000 {
 
 			status = "disabled";
 
-			pcie1_lane: lanes at 1c0e000 {
+			pcie1_lane: phy at 1c0e000 {
 				reg = <0 0x1c0e000 0 0x200>, /* tx */
 				      <0 0x1c0e200 0 0x300>, /* rx */
 				      <0 0x1c0f200 0 0x200>, /* pcs */
-- 
2.35.1




More information about the linux-phy mailing list