[PATCH 6/6] phy: rockchip-inno-usb2: Handle ID IRQ
Samuel Holland
samuel at sholland.org
Wed Apr 13 20:22:57 PDT 2022
This supports detecting host mode for the OTG port without an extcon.
The rv1108 properties are not updated due to lack of documentation.
Signed-off-by: Samuel Holland <samuel at sholland.org>
---
drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 85 +++++++++++++++++++
1 file changed, 85 insertions(+)
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index 2b29f5dd8873..e377b958d9b6 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -116,11 +116,15 @@ struct rockchip_chg_det_reg {
* @bvalid_det_en: vbus valid rise detection enable register.
* @bvalid_det_st: vbus valid rise detection status register.
* @bvalid_det_clr: vbus valid rise detection clear register.
+ * @id_det_en: id detection enable register.
+ * @id_det_st: id detection state register.
+ * @id_det_clr: id detection clear register.
* @ls_det_en: linestate detection enable register.
* @ls_det_st: linestate detection state register.
* @ls_det_clr: linestate detection clear register.
* @utmi_avalid: utmi vbus avalid status register.
* @utmi_bvalid: utmi vbus bvalid status register.
+ * @utmi_id: utmi id state register.
* @utmi_ls: utmi linestate state register.
* @utmi_hstdet: utmi host disconnect register.
*/
@@ -129,11 +133,15 @@ struct rockchip_usb2phy_port_cfg {
struct usb2phy_reg bvalid_det_en;
struct usb2phy_reg bvalid_det_st;
struct usb2phy_reg bvalid_det_clr;
+ struct usb2phy_reg id_det_en;
+ struct usb2phy_reg id_det_st;
+ struct usb2phy_reg id_det_clr;
struct usb2phy_reg ls_det_en;
struct usb2phy_reg ls_det_st;
struct usb2phy_reg ls_det_clr;
struct usb2phy_reg utmi_avalid;
struct usb2phy_reg utmi_bvalid;
+ struct usb2phy_reg utmi_id;
struct usb2phy_reg utmi_ls;
struct usb2phy_reg utmi_hstdet;
};
@@ -161,6 +169,7 @@ struct rockchip_usb2phy_cfg {
* @suspended: phy suspended flag.
* @vbus_attached: otg device vbus status.
* @bvalid_irq: IRQ number assigned for vbus valid rise detection.
+ * @id_irq: IRQ number assigned for ID pin detection.
* @ls_irq: IRQ number assigned for linestate detection.
* @otg_mux_irq: IRQ number which multiplex otg-id/otg-bvalid/linestate
* irqs to one irq in otg-port.
@@ -179,6 +188,7 @@ struct rockchip_usb2phy_port {
bool suspended;
bool vbus_attached;
int bvalid_irq;
+ int id_irq;
int ls_irq;
int otg_mux_irq;
struct mutex mutex;
@@ -419,6 +429,19 @@ static int rockchip_usb2phy_init(struct phy *phy)
if (ret)
goto out;
+ /* clear id status and enable id detect irq */
+ ret = property_enable(rphy->grf,
+ &rport->port_cfg->id_det_clr,
+ true);
+ if (ret)
+ goto out;
+
+ ret = property_enable(rphy->grf,
+ &rport->port_cfg->id_det_en,
+ true);
+ if (ret)
+ goto out;
+
schedule_delayed_work(&rport->otg_sm_work,
OTG_SCHEDULE_DELAY * 3);
} else {
@@ -913,11 +936,30 @@ static irqreturn_t rockchip_usb2phy_bvalid_irq(int irq, void *data)
return IRQ_HANDLED;
}
+static irqreturn_t rockchip_usb2phy_id_irq(int irq, void *data)
+{
+ struct rockchip_usb2phy_port *rport = data;
+ struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
+ bool id;
+
+ if (!property_enabled(rphy->grf, &rport->port_cfg->id_det_st))
+ return IRQ_NONE;
+
+ /* clear id detect irq pending status */
+ property_enable(rphy->grf, &rport->port_cfg->id_det_clr, true);
+
+ id = property_enabled(rphy->grf, &rport->port_cfg->utmi_id);
+ extcon_set_state_sync(rphy->edev, EXTCON_USB_HOST, !id);
+
+ return IRQ_HANDLED;
+}
+
static irqreturn_t rockchip_usb2phy_otg_mux_irq(int irq, void *data)
{
irqreturn_t ret = IRQ_NONE;
ret |= rockchip_usb2phy_bvalid_irq(irq, data);
+ ret |= rockchip_usb2phy_id_irq(irq, data);
return ret;
}
@@ -1015,6 +1057,25 @@ static int rockchip_usb2phy_port_irq_init(struct rockchip_usb2phy *rphy,
"failed to request otg-bvalid irq handle\n");
return ret;
}
+
+ rport->id_irq = of_irq_get_byname(child_np, "otg-id");
+ if (rport->id_irq < 0) {
+ dev_err(rphy->dev, "no otg-id irq provided\n");
+ ret = rport->id_irq;
+ return ret;
+ }
+
+ ret = devm_request_threaded_irq(rphy->dev, rport->id_irq,
+ NULL,
+ rockchip_usb2phy_id_irq,
+ IRQF_ONESHOT,
+ "rockchip_usb2phy_id",
+ rport);
+ if (ret) {
+ dev_err(rphy->dev,
+ "failed to request otg-id irq handle\n");
+ return ret;
+ }
}
break;
default:
@@ -1289,10 +1350,14 @@ static const struct rockchip_usb2phy_cfg rk3228_phy_cfgs[] = {
.bvalid_det_en = { 0x0680, 3, 3, 0, 1 },
.bvalid_det_st = { 0x0690, 3, 3, 0, 1 },
.bvalid_det_clr = { 0x06a0, 3, 3, 0, 1 },
+ .id_det_en = { 0x0680, 6, 5, 0, 3 },
+ .id_det_st = { 0x0690, 6, 5, 0, 3 },
+ .id_det_clr = { 0x06a0, 6, 5, 0, 3 },
.ls_det_en = { 0x0680, 2, 2, 0, 1 },
.ls_det_st = { 0x0690, 2, 2, 0, 1 },
.ls_det_clr = { 0x06a0, 2, 2, 0, 1 },
.utmi_bvalid = { 0x0480, 4, 4, 0, 1 },
+ .utmi_id = { 0x0480, 1, 1, 0, 1 },
.utmi_ls = { 0x0480, 3, 2, 0, 1 },
},
[USB2PHY_PORT_HOST] = {
@@ -1348,11 +1413,15 @@ static const struct rockchip_usb2phy_cfg rk3308_phy_cfgs[] = {
.bvalid_det_en = { 0x3020, 3, 2, 0, 3 },
.bvalid_det_st = { 0x3024, 3, 2, 0, 3 },
.bvalid_det_clr = { 0x3028, 3, 2, 0, 3 },
+ .id_det_en = { 0x3020, 5, 4, 0, 3 },
+ .id_det_st = { 0x3024, 5, 4, 0, 3 },
+ .id_det_clr = { 0x3028, 5, 4, 0, 3 },
.ls_det_en = { 0x3020, 0, 0, 0, 1 },
.ls_det_st = { 0x3024, 0, 0, 0, 1 },
.ls_det_clr = { 0x3028, 0, 0, 0, 1 },
.utmi_avalid = { 0x0120, 10, 10, 0, 1 },
.utmi_bvalid = { 0x0120, 9, 9, 0, 1 },
+ .utmi_id = { 0x0120, 6, 6, 0, 1 },
.utmi_ls = { 0x0120, 5, 4, 0, 1 },
},
[USB2PHY_PORT_HOST] = {
@@ -1391,11 +1460,15 @@ static const struct rockchip_usb2phy_cfg rk3328_phy_cfgs[] = {
.bvalid_det_en = { 0x0110, 3, 2, 0, 3 },
.bvalid_det_st = { 0x0114, 3, 2, 0, 3 },
.bvalid_det_clr = { 0x0118, 3, 2, 0, 3 },
+ .id_det_en = { 0x0110, 5, 4, 0, 3 },
+ .id_det_st = { 0x0114, 5, 4, 0, 3 },
+ .id_det_clr = { 0x0118, 5, 4, 0, 3 },
.ls_det_en = { 0x0110, 0, 0, 0, 1 },
.ls_det_st = { 0x0114, 0, 0, 0, 1 },
.ls_det_clr = { 0x0118, 0, 0, 0, 1 },
.utmi_avalid = { 0x0120, 10, 10, 0, 1 },
.utmi_bvalid = { 0x0120, 9, 9, 0, 1 },
+ .utmi_id = { 0x0120, 6, 6, 0, 1 },
.utmi_ls = { 0x0120, 5, 4, 0, 1 },
},
[USB2PHY_PORT_HOST] = {
@@ -1453,8 +1526,12 @@ static const struct rockchip_usb2phy_cfg rk3399_phy_cfgs[] = {
.bvalid_det_en = { 0xe3c0, 3, 3, 0, 1 },
.bvalid_det_st = { 0xe3e0, 3, 3, 0, 1 },
.bvalid_det_clr = { 0xe3d0, 3, 3, 0, 1 },
+ .id_det_en = { 0xe3c0, 5, 4, 0, 3 },
+ .id_det_st = { 0xe3e0, 5, 4, 0, 3 },
+ .id_det_clr = { 0xe3d0, 5, 4, 0, 3 },
.utmi_avalid = { 0xe2ac, 7, 7, 0, 1 },
.utmi_bvalid = { 0xe2ac, 12, 12, 0, 1 },
+ .utmi_id = { 0xe2ac, 8, 8, 0, 1 },
},
[USB2PHY_PORT_HOST] = {
.phy_sus = { 0xe458, 1, 0, 0x2, 0x1 },
@@ -1488,8 +1565,12 @@ static const struct rockchip_usb2phy_cfg rk3399_phy_cfgs[] = {
.bvalid_det_en = { 0xe3c0, 8, 8, 0, 1 },
.bvalid_det_st = { 0xe3e0, 8, 8, 0, 1 },
.bvalid_det_clr = { 0xe3d0, 8, 8, 0, 1 },
+ .id_det_en = { 0xe3c0, 10, 9, 0, 3 },
+ .id_det_st = { 0xe3e0, 10, 9, 0, 3 },
+ .id_det_clr = { 0xe3d0, 10, 9, 0, 3 },
.utmi_avalid = { 0xe2ac, 10, 10, 0, 1 },
.utmi_bvalid = { 0xe2ac, 16, 16, 0, 1 },
+ .utmi_id = { 0xe2ac, 11, 11, 0, 1 },
},
[USB2PHY_PORT_HOST] = {
.phy_sus = { 0xe468, 1, 0, 0x2, 0x1 },
@@ -1515,8 +1596,12 @@ static const struct rockchip_usb2phy_cfg rk3568_phy_cfgs[] = {
.bvalid_det_en = { 0x0080, 3, 2, 0, 3 },
.bvalid_det_st = { 0x0084, 3, 2, 0, 3 },
.bvalid_det_clr = { 0x0088, 3, 2, 0, 3 },
+ .id_det_en = { 0x0080, 5, 4, 0, 3 },
+ .id_det_st = { 0x0084, 5, 4, 0, 3 },
+ .id_det_clr = { 0x0088, 5, 4, 0, 3 },
.utmi_avalid = { 0x00c0, 10, 10, 0, 1 },
.utmi_bvalid = { 0x00c0, 9, 9, 0, 1 },
+ .utmi_id = { 0x00c0, 6, 6, 0, 1 },
},
[USB2PHY_PORT_HOST] = {
/* Select suspend control from controller */
--
2.35.1
More information about the linux-phy
mailing list