[PATCH v1 1/2] phy: usb: Add USB2.0 phy driver for Sunplus SP7021
Vinod Koul
vkoul at kernel.org
Wed Apr 13 02:49:40 PDT 2022
On 04-03-22, 19:30, Vincent Shih wrote:
> Add USB2.0 phy driver for Sunplus SP7021
>
> Signed-off-by: Vincent Shih <vincent.sunplus at gmail.com>
> ---
> MAINTAINERS | 8 ++
> drivers/phy/Kconfig | 1 +
> drivers/phy/Makefile | 1 +
> drivers/phy/sunplus/Kconfig | 12 ++
> drivers/phy/sunplus/Makefile | 2 +
> drivers/phy/sunplus/phy-sunplus-usb2.c | 248 +++++++++++++++++++++++++++++++++
> 6 files changed, 272 insertions(+)
> create mode 100644 drivers/phy/sunplus/Kconfig
> create mode 100644 drivers/phy/sunplus/Makefile
> create mode 100644 drivers/phy/sunplus/phy-sunplus-usb2.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 80eebc1..a3bb35e 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -17947,6 +17947,14 @@ L: netdev at vger.kernel.org
> S: Maintained
> F: drivers/net/ethernet/dlink/sundance.c
>
> +SUNPLUS USB2 PHY DRIVER
> +M: Vincent Shih <vincent.sunplus at gmail.com>
> +L: linux-usb at vger.kernel.org
> +S: Maintained
> +F: drivers/phy/sunplus/Kconfig
> +F: drivers/phy/sunplus/Makefile
> +F: drivers/phy/sunplus/phy-sunplus-usb2.c
> +
> SUPERH
> M: Yoshinori Sato <ysato at users.sourceforge.jp>
> M: Rich Felker <dalias at libc.org>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 82b63e6..d97e22e 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -90,6 +90,7 @@ source "drivers/phy/rockchip/Kconfig"
> source "drivers/phy/samsung/Kconfig"
> source "drivers/phy/socionext/Kconfig"
> source "drivers/phy/st/Kconfig"
> +source "drivers/phy/sunplus/Kconfig"
> source "drivers/phy/tegra/Kconfig"
> source "drivers/phy/ti/Kconfig"
> source "drivers/phy/intel/Kconfig"
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index 01e9eff..ed88b6f 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -31,6 +31,7 @@ obj-y += allwinner/ \
> samsung/ \
> socionext/ \
> st/ \
> + sunplus/ \
> tegra/ \
> ti/ \
> xilinx/
> diff --git a/drivers/phy/sunplus/Kconfig b/drivers/phy/sunplus/Kconfig
> new file mode 100644
> index 0000000..beb85f4
> --- /dev/null
> +++ b/drivers/phy/sunplus/Kconfig
> @@ -0,0 +1,12 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +
> +config PHY_SUNPLUS_USB
> + tristate "Sunplus USB2 PHY driver"
> + depends on OF && (SOC_SP7021 || COMPILE_TEST)
> + select GENERIC_PHY
> + help
> + Enable this to support the USB 2.0 PHY on Sunplus SP7021
> + SoC. The USB 2.0 PHY controller supports battery charger
> + and synchronous signals, various power down modes including
> + operating, partial and suspend modes, and high-speed,
> + full-speed and low-speed data transfer.
> diff --git a/drivers/phy/sunplus/Makefile b/drivers/phy/sunplus/Makefile
> new file mode 100644
> index 0000000..71754d5
> --- /dev/null
> +++ b/drivers/phy/sunplus/Makefile
> @@ -0,0 +1,2 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +obj-$(CONFIG_PHY_SUNPLUS_USB) += phy-sunplus-usb2.o
> diff --git a/drivers/phy/sunplus/phy-sunplus-usb2.c b/drivers/phy/sunplus/phy-sunplus-usb2.c
> new file mode 100644
> index 0000000..a2c17ca
> --- /dev/null
> +++ b/drivers/phy/sunplus/phy-sunplus-usb2.c
> @@ -0,0 +1,248 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +/*
> + * Sunplus SP7021 USB 2.0 phy driver
> + *
> + * Copyright (C) 2021 Sunplus Technology Inc., All rights reserved.
2022
> + *
> + * Note 1 : non-posted write command for the registers accesses of
> + * Sunplus SP7021.
> + *
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/nvmem-consumer.h>
> +#include <linux/of_platform.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset.h>
> +
> +#define RF_MASK_V(_mask, _val) (((_mask) << 16) | (_val))
> +#define RF_MASK_V_CLR(_mask) (((_mask) << 16) | 0)
Please use FIELD_PREP and FIELD_GET macros for these
> +
> +#define MASK_BITS 0xffff
> +#define OTP_DISC_LEVEL_DEFAULT 0xd
> +
> +// GROUP UPHY
> +#define CONFIG1 0x4
> +#define J_HS_TX_PWRSAV BIT(5)
> +#define CONFIG3 0xc
GENAMSK() ?
> +#define J_FORCE_DISC_ON BIT(5)
> +#define J_DEBUG_CTRL_ADDR_MACRO BIT(0)
> +#define CONFIG7 0x1c
> +#define J_DISC 0X1f
> +#define CONFIG9 0x24
> +#define J_ECO_PATH BIT(6)
> +#define CONFIG16 0x40
> +#define J_TBCWAIT_MASK GENMASK(6, 5)
> +#define J_TBCWAIT_1P1_MS FIELD_PREP(J_TBCWAIT_MASK, 0)
> +#define J_TVDM_SRC_DIS_MASK GENMASK(4, 3)
> +#define J_TVDM_SRC_DIS_8P2_MS FIELD_PREP(J_TVDM_SRC_DIS_MASK, 3)
> +#define J_TVDM_SRC_EN_MASK GENMASK(2, 1)
> +#define J_TVDM_SRC_EN_1P6_MS FIELD_PREP(J_TVDM_SRC_EN_MASK, 0)
> +#define J_BC_EN BIT(0)
> +#define CONFIG17 0x44
> +#define IBG_TRIM0_MASK GENMASK(7, 5)
> +#define IBG_TRIM0_SSLVHT FIELD_PREP(IBG_TRIM0_MASK, 4)
> +#define J_VDATREE_TRIM_MASK GENMASK(4, 1)
> +#define J_VDATREE_TRIM_DEFAULT FIELD_PREP(J_VDATREE_TRIM_MASK, 9)
> +#define CONFIG23 0x5c
> +#define PROB_MASK GENMASK(5, 3)
> +#define PROB FIELD_PREP(PROB_MASK, 7)
> +
> +// GROUP MOON4
wrong comments style
> +static int sp_uphy_init(struct phy *phy)
> +{
> + struct sp_usbphy *usbphy = phy_get_drvdata(phy);
> + struct nvmem_cell *cell;
> + char *disc_name = "disc_vol";
> + ssize_t otp_l = 0;
> + char *otp_v;
> + u32 val, set, pll_pwr_on, pll_pwr_off;
> +
> + /* Default value modification */
> + writel(RF_MASK_V(MASK_BITS, 0x4002), usbphy->moon4_regs + UPHY_CONTROL0);
> + writel(RF_MASK_V(MASK_BITS, 0x8747), usbphy->moon4_regs + UPHY_CONTROL1);
> +
> + /* PLL power off/on twice */
> + pll_pwr_off = (readl(usbphy->moon4_regs + UPHY_CONTROL3) & ~MASK_BITS)
> + | MO1_UPHY_PLL_POWER_OFF_SEL | MO1_UPHY_PLL_POWER_OFF;
> + pll_pwr_on = (readl(usbphy->moon4_regs + UPHY_CONTROL3) & ~MASK_BITS)
> + | MO1_UPHY_PLL_POWER_OFF_SEL;
> +
> + writel(RF_MASK_V(MASK_BITS, pll_pwr_off), usbphy->moon4_regs + UPHY_CONTROL3);
> + mdelay(1);
> + writel(RF_MASK_V(MASK_BITS, pll_pwr_on), usbphy->moon4_regs + UPHY_CONTROL3);
> + mdelay(1);
> + writel(RF_MASK_V(MASK_BITS, pll_pwr_off), usbphy->moon4_regs + UPHY_CONTROL3);
> + mdelay(1);
> + writel(RF_MASK_V(MASK_BITS, pll_pwr_on), usbphy->moon4_regs + UPHY_CONTROL3);
> + mdelay(1);
why delay on each register write?
> + writel(RF_MASK_V(MASK_BITS, 0x0), usbphy->moon4_regs + UPHY_CONTROL3);
> +
> + /* board uphy 0 internal register modification for tid certification */
> + cell = nvmem_cell_get(usbphy->dev, disc_name);
> + if (IS_ERR_OR_NULL(cell)) {
> + if (PTR_ERR(cell) == -EPROBE_DEFER)
> + return -EPROBE_DEFER;
> + }
> +
> + otp_v = nvmem_cell_read(cell, &otp_l);
> + nvmem_cell_put(cell);
> +
> + if (otp_v) {
> + set = *(otp_v + 1);
> + set = (set << (sizeof(char) * 8)) | *otp_v;
> + set = (set >> usbphy->disc_vol_addr_off) & J_DISC;
> + }
> +
> + if (!otp_v || set == 0)
> + set = OTP_DISC_LEVEL_DEFAULT;
> +
> + val = readl(usbphy->phy_regs + CONFIG7);
> + val = (val & ~J_DISC) | set;
> + writel(val, usbphy->phy_regs + CONFIG7);
maybe add a updatel() macro
> +static const struct phy_ops sp_uphy_ops = {
> + .init = sp_uphy_init,
no power_on/off/exit routines??
> +static const struct of_device_id sp_uphy_dt_ids[] = {
> + {.compatible = "sunplus,sp7021-usb2-phy",
> + .data = &sp_uphy_ops,},
why should the ops be in driver data?
--
~Vinod
More information about the linux-phy
mailing list