[PATCH v3 6/8] phy: uniphier-pcie: Add dual-phy support for NX1 SoC
Kunihiko Hayashi
hayashi.kunihiko at socionext.com
Fri Oct 29 03:39:05 PDT 2021
NX1 SoC supports 2 lanes and has dual-phy. Should set appropriate
configuration values to both PHY registers.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko at socionext.com>
---
drivers/phy/socionext/phy-uniphier-pcie.c | 48 ++++++++++++++++++++++---------
1 file changed, 34 insertions(+), 14 deletions(-)
diff --git a/drivers/phy/socionext/phy-uniphier-pcie.c b/drivers/phy/socionext/phy-uniphier-pcie.c
index 2bd8df619712..ebca296ef123 100644
--- a/drivers/phy/socionext/phy-uniphier-pcie.c
+++ b/drivers/phy/socionext/phy-uniphier-pcie.c
@@ -27,6 +27,7 @@
#define TESTI_DAT_MASK GENMASK(13, 6)
#define TESTI_ADR_MASK GENMASK(5, 1)
#define TESTI_WR_EN BIT(0)
+#define TESTIO_PHY_SHIFT 16
#define PCL_PHY_TEST_O 0x2004
#define TESTO_DAT_MASK GENMASK(7, 0)
@@ -65,43 +66,57 @@ struct uniphier_pciephy_priv {
struct uniphier_pciephy_soc_data {
bool is_legacy;
+ bool is_dual_phy;
void (*set_phymode)(struct regmap *regmap);
};
static void uniphier_pciephy_testio_write(struct uniphier_pciephy_priv *priv,
- u32 data)
+ int id, u32 data)
{
+ if (id)
+ data <<= TESTIO_PHY_SHIFT;
+
/* need to read TESTO twice after accessing TESTI */
writel(data, priv->base + PCL_PHY_TEST_I);
readl(priv->base + PCL_PHY_TEST_O);
readl(priv->base + PCL_PHY_TEST_O);
}
+static u32 uniphier_pciephy_testio_read(struct uniphier_pciephy_priv *priv, int id)
+{
+ u32 val = readl(priv->base + PCL_PHY_TEST_O);
+
+ if (id)
+ val >>= TESTIO_PHY_SHIFT;
+
+ return val & TESTO_DAT_MASK;
+}
+
static void uniphier_pciephy_set_param(struct uniphier_pciephy_priv *priv,
- u32 reg, u32 mask, u32 param)
+ int id, u32 reg, u32 mask, u32 param)
{
u32 val;
/* read previous data */
val = FIELD_PREP(TESTI_DAT_MASK, 1);
val |= FIELD_PREP(TESTI_ADR_MASK, reg);
- uniphier_pciephy_testio_write(priv, val);
- val = readl(priv->base + PCL_PHY_TEST_O) & TESTO_DAT_MASK;
+ uniphier_pciephy_testio_write(priv, id, val);
+ val = uniphier_pciephy_testio_read(priv, id);
/* update value */
val &= ~mask;
val |= mask & param;
val = FIELD_PREP(TESTI_DAT_MASK, val);
val |= FIELD_PREP(TESTI_ADR_MASK, reg);
- uniphier_pciephy_testio_write(priv, val);
- uniphier_pciephy_testio_write(priv, val | TESTI_WR_EN);
- uniphier_pciephy_testio_write(priv, val);
+ uniphier_pciephy_testio_write(priv, id, val);
+ uniphier_pciephy_testio_write(priv, id, val | TESTI_WR_EN);
+ uniphier_pciephy_testio_write(priv, id, val);
/* read current data as dummy */
val = FIELD_PREP(TESTI_DAT_MASK, 1);
val |= FIELD_PREP(TESTI_ADR_MASK, reg);
- uniphier_pciephy_testio_write(priv, val);
- readl(priv->base + PCL_PHY_TEST_O);
+ uniphier_pciephy_testio_write(priv, id, val);
+ uniphier_pciephy_testio_read(priv, id);
}
static void uniphier_pciephy_assert(struct uniphier_pciephy_priv *priv)
@@ -127,7 +142,7 @@ static int uniphier_pciephy_init(struct phy *phy)
{
struct uniphier_pciephy_priv *priv = phy_get_drvdata(phy);
u32 val;
- int ret;
+ int ret, id;
ret = clk_prepare_enable(priv->clk);
if (ret)
@@ -155,14 +170,16 @@ static int uniphier_pciephy_init(struct phy *phy)
if (priv->data->is_legacy)
return 0;
- uniphier_pciephy_set_param(priv, PCL_PHY_R00,
+ for (id = 0; id < (priv->data->is_dual_phy ? 2 : 1); id++) {
+ uniphier_pciephy_set_param(priv, id, PCL_PHY_R00,
RX_EQ_ADJ_EN, RX_EQ_ADJ_EN);
- uniphier_pciephy_set_param(priv, PCL_PHY_R06, RX_EQ_ADJ,
+ uniphier_pciephy_set_param(priv, id, PCL_PHY_R06, RX_EQ_ADJ,
FIELD_PREP(RX_EQ_ADJ, RX_EQ_ADJ_VAL));
- uniphier_pciephy_set_param(priv, PCL_PHY_R26, VCO_CTRL,
+ uniphier_pciephy_set_param(priv, id, PCL_PHY_R26, VCO_CTRL,
FIELD_PREP(VCO_CTRL, VCO_CTRL_INIT_VAL));
- uniphier_pciephy_set_param(priv, PCL_PHY_R28, VCOPLL_CLMP,
+ uniphier_pciephy_set_param(priv, id, PCL_PHY_R28, VCOPLL_CLMP,
FIELD_PREP(VCOPLL_CLMP, VCOPLL_CLMP_VAL));
+ }
usleep_range(1, 10);
uniphier_pciephy_deassert(priv);
@@ -282,15 +299,18 @@ static const struct uniphier_pciephy_soc_data uniphier_pro5_data = {
static const struct uniphier_pciephy_soc_data uniphier_ld20_data = {
.is_legacy = false,
+ .is_dual_phy = false,
.set_phymode = uniphier_pciephy_ld20_setmode,
};
static const struct uniphier_pciephy_soc_data uniphier_pxs3_data = {
.is_legacy = false,
+ .is_dual_phy = false,
};
static const struct uniphier_pciephy_soc_data uniphier_nx1_data = {
.is_legacy = false,
+ .is_dual_phy = true,
.set_phymode = uniphier_pciephy_nx1_setmode,
};
--
2.7.4
More information about the linux-phy
mailing list