[PATCH] phy: stm32: adopt dev_err_probe for regulators

Fabrice Gasnier fabrice.gasnier at foss.st.com
Mon Oct 25 07:31:05 PDT 2021


Change stm32-usbphyc driver to use dev_err_probe(), to benefit of
devices_deferred debugfs in case of probe deferral.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier at foss.st.com>
---
 drivers/phy/st/phy-stm32-usbphyc.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/phy/st/phy-stm32-usbphyc.c b/drivers/phy/st/phy-stm32-usbphyc.c
index 7df6a63..115be0e 100644
--- a/drivers/phy/st/phy-stm32-usbphyc.c
+++ b/drivers/phy/st/phy-stm32-usbphyc.c
@@ -672,17 +672,15 @@ static int stm32_usbphyc_probe(struct platform_device *pdev)
 
 	usbphyc->vdda1v1 = devm_regulator_get(dev, "vdda1v1");
 	if (IS_ERR(usbphyc->vdda1v1)) {
-		ret = PTR_ERR(usbphyc->vdda1v1);
-		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "failed to get vdda1v1 supply: %d\n", ret);
+		ret = dev_err_probe(dev, PTR_ERR(usbphyc->vdda1v1),
+				    "failed to get vdda1v1 supply\n");
 		goto clk_disable;
 	}
 
 	usbphyc->vdda1v8 = devm_regulator_get(dev, "vdda1v8");
 	if (IS_ERR(usbphyc->vdda1v8)) {
-		ret = PTR_ERR(usbphyc->vdda1v8);
-		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "failed to get vdda1v8 supply: %d\n", ret);
+		ret = dev_err_probe(dev, PTR_ERR(usbphyc->vdda1v8),
+				    "failed to get vdda1v8 supply\n");
 		goto clk_disable;
 	}
 
-- 
2.7.4




More information about the linux-phy mailing list