[PATCH v3 0/9] add the imx8m pcie phy driver and imx8mm pcie support
Richard Zhu
hongxing.zhu at nxp.com
Mon Oct 18 19:10:16 PDT 2021
> -----Original Message-----
> From: Tim Harvey <tharvey at gateworks.com>
> Sent: Saturday, October 16, 2021 3:59 AM
> To: Richard Zhu <hongxing.zhu at nxp.com>; Lucas Stach
> <l.stach at pengutronix.de>
> Cc: Kishon Vijay Abraham I <kishon at ti.com>; vkoul at kernel.org; Rob Herring
> <robh at kernel.org>; galak at kernel.crashing.org; Shawn Guo
> <shawnguo at kernel.org>; linux-phy at lists.infradead.org; Device Tree Mailing
> List <devicetree at vger.kernel.org>; Linux ARM Mailing List
> <linux-arm-kernel at lists.infradead.org>; open list
> <linux-kernel at vger.kernel.org>; Sascha Hauer <kernel at pengutronix.de>;
> dl-linux-imx <linux-imx at nxp.com>
> Subject: Re: [PATCH v3 0/9] add the imx8m pcie phy driver and imx8mm pcie
> support
>
> On Tue, Oct 12, 2021 at 2:06 AM Richard Zhu <hongxing.zhu at nxp.com>
> wrote:
> >
> > refer to the discussion [1] when try to enable i.MX8MM PCIe support,
> > one standalone PCIe PHY driver should be seperated from i.MX PCIe
> > driver when enable i.MX8MM PCIe support.
> >
> > This patch-set adds the standalone PCIe PHY driver suport[1-5], and
> > i.MX8MM PCIe support[6-9] to have whole view to review this patch-set.
> >
> > The PCIe works on i.MX8MM EVK board based the the blkctrl power driver
> > [2] and this PHY driver patch-set.
> >
> > [1]
> > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatc
> >
> hwork.ozlabs.org%2Fproject%2Flinux-pci%2Fpatch%2F20210510141509.929
> 120
> >
> -3-l.stach%40pengutronix.de%2F&data=04%7C01%7Chongxing.zhu%40
> nxp.c
> >
> om%7C4e3d8ee008d94327f99108d9901634be%7C686ea1d3bc2b4c6fa92cd
> 99c5c3016
> >
> 35%7C0%7C0%7C637699247319711209%7CUnknown%7CTWFpbGZsb3d8ey
> JWIjoiMC4wLj
> >
> AwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&
> ;sdata=
> >
> Z2TZCpdDUSoqrNB1X%2BXdoYNBe3dBDKUgkA4r%2F0TcdOg%3D&reser
> ved=0
> > [2]
> > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatc
> >
> hwork.kernel.org%2Fproject%2Flinux-arm-kernel%2Fcover%2F202109102026
> 40
> > .980366-1-l.stach%40pengutronix.de%2F&data=04%7C01%7Chongxin
> g.zhu%
> >
> 40nxp.com%7C4e3d8ee008d94327f99108d9901634be%7C686ea1d3bc2b4c6
> fa92cd99
> >
> c5c301635%7C0%7C0%7C637699247319711209%7CUnknown%7CTWFpbGZ
> sb3d8eyJWIjo
> >
> iMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C10
> 00&
> > ;sdata=5h%2By%2FcBW%2BjFkyplUuN1nB5%2BAFHuwCUJBqvRh1RiPYMo
> %3D&rese
> > rved=0
> >
> > Main changes v2 --> v3:
> > - Regarding Lucas' comments.
> > - to have a whole view to review the patches, send out the i.MX8MM PCIe
> support too.
> > - move the PHY related bits manipulations of the GPR/SRC to standalone
> PHY driver.
> > - split the dts changes to SOC and board DT, and use the enum instead of
> raw value.
> > - update the license of the dt-binding header file.
> >
> > Changes v1 --> v2:
> > - Update the license of the dt-binding header file to make the license
> > compatible with dts files.
> > - Fix the dt_binding_check errors.
> >
> > Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml | 6 +++
> > Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml | 79
> +++++++++++++++++++++++++++++
> > arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi | 53
> ++++++++++++++++++++
> > arch/arm64/boot/dts/freescale/imx8mm.dtsi |
> 46 ++++++++++++++++-
> > drivers/pci/controller/dwc/pci-imx6.c | 63
> ++++++++++++++++++++++-
> > drivers/phy/freescale/Kconfig | 9
> ++++
> > drivers/phy/freescale/Makefile | 1
> +
> > drivers/phy/freescale/phy-fsl-imx8m-pcie.c | 218
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> ++++++++++++++++++
> > include/dt-bindings/phy/phy-imx8-pcie.h | 14
> ++++++
> > 9 files changed, 486 insertions(+), 3 deletions(-)
> >
> > [PATCH v3 1/9] dt-bindings: phy: phy-imx8-pcie: Add binding for the
> > [PATCH v3 2/9] dt-bindings: phy: add imx8 pcie phy driver support
> > [PATCH v3 3/9] arm64: dts: imx8mm: add the pcie phy support [PATCH v3
> > 4/9] arm64: dts: imx8mm-evk: add the pcie phy support [PATCH v3 5/9]
> > phy: freescale: pcie: initialize the imx8 pcie [PATCH v3 6/9]
> > dt-bindings: imx6q-pcie: Add PHY phandles and name [PATCH v3 7/9]
> > arm64: dts: imx8mm: add the pcie support [PATCH v3 8/9] arm64: dts:
> > imx8mm-evk: add the pcie support on imx8mm [PATCH v3 9/9] PCI: imx:
> > add the imx8mm pcie support
>
> Richard and Lucas,
>
> Thanks for your collective work on this series!
>
> I have imx8mm-venice boards to test this on both with and without PCIe
> bridges. I've tested this on top of Shawn's imx/for-next (as blk-ctl has been
> merged there) and end up hanging waiting for PHY ready timeout.
[Richard Zhu] Sorry to reply late. I run the tests based on pci/for-next applied the blk-ctl issue by Lucas [2] in commit.
Can you help to make a re-tests?
As I know that the blk-ctl is not merged yet.
Hi Lucas:
Am I right?
BR
Richard
>
> [ 1.454308] imx6q-pcie 33800000.pcie: IO
> 0x001ff80000..0x001ff8ffff -> 0x0
> [ 1.466538] imx6q-pcie 33800000.pcie: MEM
> 0x0018000000..0x001fefffff -> 0x0
> [ 1.476344] libphy: fec_enet_mii_bus: probed
> [ 1.602631] phy phy-32f00000.pcie-phy.0: phy init failed --> -110
> [ 1.608775] imx6q-pcie 33800000.pcie: Waiting for PHY ready timeout!
>
> I can verify that imx8_pcie_phy_probe returns successfully and the the phy
> node (imx6_pcie->phy) was found.
>
> Here is the dt change I made for the imx8mm-venice-gw71xx-0x board that
> has no bridge:
[Richard Zhu] Refer to the changes, the external OSC is used as PCIe REF clock(same to EVK board design), right?
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
> b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
> index 91544576f145..e89e9cf7318e 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
> @@ -5,6 +5,7 @@
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/leds/common.h>
> +#include <dt-bindings/phy/phy-imx8-pcie.h>
>
> / {
> aliases {
> @@ -33,6 +34,12 @@
> };
> };
>
> + pcie0_refclk: pcie0-refclk {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <100000000>;
> + };
> +
> pps {
> compatible = "pps-gpio";
> pinctrl-names = "default"; @@ -101,6 +108,27 @@
> status = "okay";
> };
>
> +&pcie0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pcie0>;
> + reset-gpio = <&gpio4 6 GPIO_ACTIVE_LOW>;
> + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk
> IMX8MM_CLK_PCIE1_AUX>,
> + <&clk IMX8MM_CLK_DUMMY>, <&pcie0_refclk>;
> + clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
> + assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
> + <&clk IMX8MM_CLK_PCIE1_CTRL>;
> + assigned-clock-rates = <10000000>, <250000000>;
> + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
> + <&clk IMX8MM_SYS_PLL2_250M>;
> + status = "okay";
> +};
> +
> +&pcie_phy {
> + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
> + clocks = <&clk IMX8MM_CLK_DUMMY>;
> + status = "okay";
> +};
> +
> /* GPS */
> &uart1 {
> pinctrl-names = "default";
> @@ -162,6 +190,12 @@
> >;
> };
>
> + pinctrl_pcie0: pciegrp {
> + fsl,pins = <
> + MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6
> 0x41
> + >;
> + };
> +
> pinctrl_pps: ppsgrp {
> fsl,pins = <
> MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15
> 0x41
>
> and here are the changes to the imx8mm-venice-gw72xx-0x dt - this board
> has a PCIe bridge:
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
> b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
> index b12ead847302..260ea93ebfc2 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
> @@ -5,9 +5,11 @@
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/leds/common.h>
> +#include <dt-bindings/phy/phy-imx8-pcie.h>
>
> / {
> aliases {
> + ethernet1 = ð1;
> usb0 = &usbotg1;
> usb1 = &usbotg2;
> };
> @@ -33,6 +35,12 @@
> };
> };
>
> + pcie0_refclk: pcie0-refclk {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <100000000>;
> + };
> +
> pps {
> compatible = "pps-gpio";
> pinctrl-names = "default"; @@ -122,6 +130,53 @@
> status = "okay";
> };
>
> +&pcie0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pcie0>;
> + reset-gpio = <&gpio4 6 GPIO_ACTIVE_LOW>;
> + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk
> IMX8MM_CLK_PCIE1_AUX>,
> + <&clk IMX8MM_CLK_DUMMY>, <&pcie0_refclk>;
> + clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
> + assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
> + <&clk IMX8MM_CLK_PCIE1_CTRL>;
> + assigned-clock-rates = <10000000>, <250000000>;
> + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
> + <&clk IMX8MM_SYS_PLL2_250M>;
> + status = "okay";
> +
> + pcie at 0,0 {
> + reg = <0x0000 0 0 0 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + pcie at 1,0 {
> + reg = <0x0000 0 0 0 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + pcie at 2,3 {
> + reg = <0x1800 0 0 0 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + eth1: pcie at 5,0 {
> + reg = <0x0000 0 0 0 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + local-mac-address = [00 00
> 00 00 00 00];
> + };
> + };
> + };
> + };
> +};
> +
> +&pcie_phy {
> + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
> + clocks = <&clk IMX8MM_CLK_DUMMY>;
> + status = "okay";
> +};
> +
> /* off-board header */
> &sai3 {
> pinctrl-names = "default";
> @@ -214,6 +269,12 @@
> >;
> };
>
> + pinctrl_pcie0: pciegrp {
> + fsl,pins = <
> + MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6
> 0x41
> + >;
> + };
> +
> pinctrl_pps: ppsgrp {
> fsl,pins = <
> MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15
> 0x41
>
>
> Any ideas?
>
> Perhaps
More information about the linux-phy
mailing list