[PATCH v3 0/9] add the imx8m pcie phy driver and imx8mm pcie support
Richard Zhu
hongxing.zhu at nxp.com
Tue Oct 12 01:41:09 PDT 2021
refer to the discussion [1] when try to enable i.MX8MM PCIe support,
one standalone PCIe PHY driver should be seperated from i.MX PCIe
driver when enable i.MX8MM PCIe support.
This patch-set adds the standalone PCIe PHY driver suport[1-5], and i.MX8MM
PCIe support[6-9] to have whole view to review this patch-set.
The PCIe works on i.MX8MM EVK board based the the blkctrl power driver
[2] and this PHY driver patch-set.
[1] https://patchwork.ozlabs.org/project/linux-pci/patch/20210510141509.929120-3-l.stach@pengutronix.de/
[2] https://patchwork.kernel.org/project/linux-arm-kernel/cover/20210910202640.980366-1-l.stach@pengutronix.de/
Main changes v2 --> v3:
- Regarding Lucas' comments.
- to have a whole view to review the patches, send out the i.MX8MM PCIe support too.
- move the PHY related bits manipulations of the GPR/SRC to standalone PHY driver.
- split the dts changes to SOC and board DT, and use the enum instead of raw value.
- update the license of the dt-binding header file.
Changes v1 --> v2:
- Update the license of the dt-binding header file to make the license
compatible with dts files.
- Fix the dt_binding_check errors.
Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml | 6 +++
Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml | 79 +++++++++++++++++++++++++++++
arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi | 53 ++++++++++++++++++++
arch/arm64/boot/dts/freescale/imx8mm.dtsi | 46 ++++++++++++++++-
drivers/pci/controller/dwc/pci-imx6.c | 63 ++++++++++++++++++++++-
drivers/phy/freescale/Kconfig | 9 ++++
drivers/phy/freescale/Makefile | 1 +
drivers/phy/freescale/phy-fsl-imx8m-pcie.c | 218 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
include/dt-bindings/phy/phy-imx8-pcie.h | 14 ++++++
9 files changed, 486 insertions(+), 3 deletions(-)
[PATCH v3 1/9] dt-bindings: phy: phy-imx8-pcie: Add binding for the
[PATCH v3 2/9] dt-bindings: phy: add imx8 pcie phy driver support
[PATCH v3 3/9] arm64: dts: imx8mm: add the pcie phy support
[PATCH v3 4/9] arm64: dts: imx8mm-evk: add the pcie phy support
[PATCH v3 5/9] phy: freescale: pcie: initialize the imx8 pcie
[PATCH v3 6/9] dt-bindings: imx6q-pcie: Add PHY phandles and name
[PATCH v3 7/9] arm64: dts: imx8mm: add the pcie support
[PATCH v3 8/9] arm64: dts: imx8mm-evk: add the pcie support on imx8mm
[PATCH v3 9/9] PCI: imx: add the imx8mm pcie support
More information about the linux-phy
mailing list