[PATCH v2] phy: qcom-qusb2: Fix a memory leak on probe

[Vinod Koul]

On 23-09-21, 02:35, Vladimir Zapolskiy wrote:
> On success nvmem_cell_read() returns a pointer to a dynamically allocated
> buffer, and therefore it shall be freed after usage.
> 
> The issue is reported by kmemleak:
> 
>   # cat /sys/kernel/debug/kmemleak
>   unreferenced object 0xffff3b3803e4b280 (size 128):
>     comm "kworker/u16:1", pid 107, jiffies 4294892861 (age 94.120s)
>     hex dump (first 32 bytes):
>       00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
>       00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
>     backtrace:
>       [<000000007739afdc>] __kmalloc+0x27c/0x41c
>       [<0000000071c0fbf8>] nvmem_cell_read+0x40/0xe0
>       [<00000000e803ef1f>] qusb2_phy_init+0x258/0x5bc
>       [<00000000fc81fcfa>] phy_init+0x70/0x110
>       [<00000000e3d48a57>] dwc3_core_soft_reset+0x4c/0x234
>       [<0000000027d1dbd4>] dwc3_core_init+0x68/0x990
>       [<000000001965faf9>] dwc3_probe+0x4f4/0x730
>       [<000000002f7617ca>] platform_probe+0x74/0xf0
>       [<00000000a2576cac>] really_probe+0xc4/0x470
>       [<00000000bc77f2c5>] __driver_probe_device+0x11c/0x190
>       [<00000000130db71f>] driver_probe_device+0x48/0x110
>       [<0000000019f36c2b>] __device_attach_driver+0xa4/0x140
>       [<00000000e5812ff7>]  bus_for_each_drv+0x84/0xe0
>       [<00000000f4bac574>] __device_attach+0xe4/0x1c0
>       [<00000000d3beb631>] device_initial_probe+0x20/0x30
>       [<000000008019b9db>] bus_probe_device+0xa4/0xb0
> 
> Fixes: ca04d9d3e1b1 ("phy: qcom-qusb2: New driver for QUSB2 PHY on Qcom chips")
> Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy at linaro.org>
> ---
> Changes from v1 to v2:
> * fixed a memory leak in case of reading a zero value and return,
> * corrected the fixed commit, the memory leak is present before a rename.
> 
>  drivers/phy/qualcomm/phy-qcom-qusb2.c | 16 ++++++++++------
>  1 file changed, 10 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
> index 3c1d3b71c825..f1d97fbd1331 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
> @@ -561,7 +561,7 @@ static void qusb2_phy_set_tune2_param(struct qusb2_phy *qphy)
>  {
>  	struct device *dev = &qphy->phy->dev;
>  	const struct qusb2_phy_cfg *cfg = qphy->cfg;
> -	u8 *val;
> +	u8 *val, hstx_trim;
>  
>  	/* efuse register is optional */
>  	if (!qphy->cell)
> @@ -575,7 +575,13 @@ static void qusb2_phy_set_tune2_param(struct qusb2_phy *qphy)
>  	 * set while configuring the phy.
>  	 */
>  	val = nvmem_cell_read(qphy->cell, NULL);
> -	if (IS_ERR(val) || !val[0]) {
> +	if (IS_ERR(val)) {
> +		dev_dbg(dev, "failed to read a valid hs-tx trim value\n");

not an error log..?

-- 
~Vinod