[PATCH v3 0/6] AM64: Add SERDES driver support
Kishon Vijay Abraham I
kishon at ti.com
Wed Mar 10 12:08:34 GMT 2021
AM64 uses the same SERDES as in J7200, however AM642 EVM doesn't
have a clock generator (unlike J7200 base board). Here the clock from
the SERDES has to be routed to the PCIE connector. This series adds
support to drive reference clock output from SERDES and also adds
SERDES (torrent) and SERDES wrapper (WIZ) bindings.
v1 of the patch series can be found @ [1]
v2 of the patch series can be found @ [3]
Changes from v2:
*) Sent the DT bindings as a separate series [4]
*) Remove enabling PHY output clock in isolation mode
Changes from v1:
*) Model the internal clocks without device tree input (Add #clock-cells
to SERDES DT nodes for getting a reference to the clock using index
to phandle). This is in accordance with comment given by Rob [2].
However the existing method to model clocks from device tree is not
removed to support upstreamed device tree.
*) Included a patch to fix modifying static data by instance specific
initializations.
*) Added a fix to delete "clk_div_sel" clk provider during cleanup
[1] -> https://lore.kernel.org/r/20201224114250.1083-1-kishon@ti.com
[2] -> http://lore.kernel.org/r/20210108025943.GA1790601@robh.at.kernel.org
[3] -> http://lore.kernel.org/r/20210222112314.10772-1-kishon@ti.com
[4] -> http://lore.kernel.org/r/20210310112745.3445-1-kishon@ti.com
Kishon Vijay Abraham I (6):
phy: ti: j721e-wiz: Remove "regmap_field" from wiz_clk_{mux|div}_sel
phy: ti: j721e-wiz: Delete "clk_div_sel" clk provider during cleanup
phy: ti: j721e-wiz: Configure full rate divider for AM64
phy: ti: j721e-wiz: Model the internal clocks without device tree
input
phy: ti: j721e-wiz: Enable reference clock output in cmn_refclk_<p/m>
phy: cadence-torrent: Add support to drive refclk out
drivers/phy/cadence/Kconfig | 1 +
drivers/phy/cadence/phy-cadence-torrent.c | 188 +++++++++++-
drivers/phy/ti/phy-j721e-wiz.c | 349 +++++++++++++++++++---
3 files changed, 488 insertions(+), 50 deletions(-)
--
2.17.1
More information about the linux-phy
mailing list