[PATCH 2/3] dt-bindings: phy: brcm,ns-usb2-phy: bind single CRU reg

[Rafał Miłecki]

Cc linux-phy@

On 26.02.2021 12:45, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal at milecki.pl>
> 
> The old binding was using whole DMU space. It was an overkill. DMU is a
> big block which contains e.g. CRU which contains e.g. PLLs, PHY, pinctrl
> and thermal blocks.
> 
> Rework the binding to directly use a single CRU register that controls
> USB 2.0 PHY. It's still required to reference CRU generic clkset
> register so add a syscon for that.
> 
> For a full DMU & CRU description see arch/arm/boot/dts/bcm5301x.dtsi .
> 
> The old binding is deprecated now.
> 
> Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
> ---
> This has been verified using dt_binding_check
> 
> I'd really like to get Rob's ack to make sure I don't do anything stupid
> 
> It's a reworked version of my abonded 2019 patch:
> [PATCH V2 1/2] dt-bindings: bcm-ns-usb2-phy: rework binding to use CRU syscon
> https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20190108123907.19816-1-zajec5@gmail.com/
> ---
>   .../bindings/phy/brcm,ns-usb2-phy.yaml        | 46 +++++++++++++++----
>   1 file changed, 36 insertions(+), 10 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/phy/brcm,ns-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,ns-usb2-phy.yaml
> index b8b683ce8fa9..8e056d4d205a 100644
> --- a/Documentation/devicetree/bindings/phy/brcm,ns-usb2-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/brcm,ns-usb2-phy.yaml
> @@ -16,11 +16,20 @@ properties:
>       const: brcm,ns-usb2-phy
>   
>     reg:
> -    maxItems: 1
> -    description: DMU (Device Management Unit) address range
> +    anyOf:
> +      - maxItems: 1
> +        description: PHY control register
> +      - maxItems: 1
> +        description: DMU (Device Management Unit) address range
> +        deprecated: true
>   
>     reg-names:
>       const: dmu
> +    deprecated: true
> +
> +  brcm,syscon-clkset:
> +    description: phandle to syscon for clkset register
> +    $ref: /schemas/types.yaml#/definitions/phandle
>   
>     clocks:
>       maxItems: 1
> @@ -34,22 +43,39 @@ properties:
>   
>   required:
>     - reg
> -  - reg-names
>     - clocks
>     - clock-names
>     - "#phy-cells"
>   
> +oneOf:
> +  - required:
> +      - brcm,syscon-clkset
> +  - required:
> +      - reg-names
> +
>   additionalProperties: false
>   
>   examples:
>     - |
>       #include <dt-bindings/clock/bcm-nsp.h>
>   
> -    usb2-phy at 1800c000 {
> -        compatible = "brcm,ns-usb2-phy";
> -        reg = <0x1800c000 0x1000>;
> -        reg-names = "dmu";
> -        clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
> -        clock-names = "phy-ref-clk";
> -        #phy-cells = <0>;
> +    cru-bus at 1800c100 {
> +        compatible = "simple-bus";
> +        ranges = <0 0x1800c100 0x1a4>;
> +        #address-cells = <1>;
> +        #size-cells = <1>;
> +
> +        usb2-phy at 64 {
> +            compatible = "brcm,ns-usb2-phy";
> +            reg = <0x64 0x4>;
> +            brcm,syscon-clkset = <&clkset>;
> +            clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
> +            clock-names = "phy-ref-clk";
> +            #phy-cells = <0>;
> +        };
> +
> +        clkset: syscon at 80 {
> +            compatible = "brcm,cru-clkset", "syscon";
> +            reg = <0x80 0x4>;
> +        };
>       };
>