[PATCH v2 01/11] dt-bindings: phy: renesas: Document RZ/G2L USB PHY Control bindings

[Rob Herring]

On Wed, Jun 23, 2021 at 7:38 AM Biju Das <biju.das.jz at bp.renesas.com> wrote:
>
> Hi Rob,
>
> Thanks for the feedback.
>
> > Subject: Re: [PATCH v2 01/11] dt-bindings: phy: renesas: Document RZ/G2L
> > USB PHY Control bindings
> >
> > On Mon, Jun 21, 2021 at 10:39:33AM +0100, Biju Das wrote:
> > > Add device tree binding document for RZ/G2L USB PHY control driver.
> > >
> > > Signed-off-by: Biju Das <biju.das.jz at bp.renesas.com>
> > > Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>
> > > ---
> > > V1->V2:
> > >  * Add clock properties
> > > ---
> > >  .../phy/renesas,rzg2l-usbphyctrl.yaml         | 65 +++++++++++++++++++
> > >  1 file changed, 65 insertions(+)
> > >  create mode 100644
> > > Documentation/devicetree/bindings/phy/renesas,rzg2l-usbphyctrl.yaml
> > >
> > > diff --git
> > > a/Documentation/devicetree/bindings/phy/renesas,rzg2l-usbphyctrl.yaml
> > > b/Documentation/devicetree/bindings/phy/renesas,rzg2l-usbphyctrl.yaml
> > > new file mode 100644
> > > index 000000000000..8e8ba43f595d
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/phy/renesas,rzg2l-usbphyctrl.y
> > > +++ aml
> > > @@ -0,0 +1,65 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2
> > > +---
> > > +$id:
> > > +https://jpn01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevi
> > > +cetree.org%2Fschemas%2Fphy%2Frenesas%2Crzg2l-usbphyctrl.yaml%23&d
> > > +ata=04%7C01%7Cbiju.das.jz%40bp.renesas.com%7Cc6bbf5f6ce334eaa722a08d9
> > > +359f07ad%7C53d82571da1947e49cb4625a166a4a2a%7C0%7C0%7C637599779421910
> > > +039%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBT
> > > +iI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=Jcf6Om4DehifCe1KO1rmt5LxTB
> > > +6jtGoQLD1MoqWGM%2F0%3D&reserved=0
> > > +$schema:
> > > +https://jpn01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevi
> > > +cetree.org%2Fmeta-schemas%2Fcore.yaml%23&data=04%7C01%7Cbiju.das.
> > > +jz%40bp.renesas.com%7Cc6bbf5f6ce334eaa722a08d9359f07ad%7C53d82571da19
> > > +47e49cb4625a166a4a2a%7C0%7C0%7C637599779421910039%7CUnknown%7CTWFpbGZ
> > > +sb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%
> > > +3D%7C1000&sdata=LlqPRLf9%2BGrEdSapxCFhwxVKcXTVh9ECr%2FXPN0SIzi4%3
> > > +D&reserved=0
> > > +
> > > +title: Renesas RZ/G2L USB2.0 PHY Control
> > > +
> > > +maintainers:
> > > +  - Biju Das <biju.das.jz at bp.renesas.com>
> > > +
> > > +description:
> > > +  The RZ/G2L USB2.0 PHY Control mainly controls reset and power down
> > > +of the
> > > +  USB/PHY.
> > > +
> > > +properties:
> > > +  compatible:
> > > +    items:
> > > +      - enum:
> > > +          - renesas,r9a07g044-usbphyctrl # RZ/G2{L,LC}
> > > +      - const: renesas,rzg2l-usbphyctrl
> > > +
> > > +  reg:
> > > +    maxItems: 1
> > > +
> > > +  clocks:
> > > +    maxItems: 1
> > > +
> > > +  resets:
> > > +    maxItems: 1
> > > +
> > > +  power-domains:
> > > +    maxItems: 1
> > > +
> > > +  '#phy-cells':
> > > +    # see phy-bindings.txt in the same directory
> > > +    const: 1
> > > +    description: |
> > > +      The phandle's argument in the PHY specifier is the phy reset
> > control bit
> > > +      of usb phy control.
> > > +      0 = Port 1 Phy reset
> > > +      1 = Port 2 Phy reset
> > > +    enum: [ 0, 1 ]
> >
> > You already have the const, so this doesn't do anything.
>
> OK, will take out const.

No, 'const' is correct. This is the value of '#phy-cells', not the
contents (we don't have a way to express schema for that).

> > > +required:
> > > +  - compatible
> > > +  - reg
> > > +  - clocks
> > > +  - '#phy-cells'
> > > +
> > > +additionalProperties: false
> > > +
> > > +examples:
> > > +  - |
> > > +    #include <dt-bindings/clock/r9a07g044-cpg.h>
> > > +
> > > +    usbphyctrl at 11c40000 {
> >
> > usb-phy at ...
>
> The IP is called USBPHY control. It mainly controls reset and power down of the USB2.0/PHY.

Sounds like it should be using the reset binding...

>
> So not sure usb-phy is right one here ? I prefer usb-phy-ctrl instead. Is it ok? Please let me know.

A node with #phy-cells should use the standard phy node names unless
it has other controls. As I said, this doesn't seem to be a phy, so
using #phy-cells here is what seems wrong.

> > > +        compatible = "renesas,r9a07g044-usbphyctrl",
> > > +                     "renesas,rzg2l-usbphyctrl";
> > > +        reg = <0x11c40000 0x10000>;
> > > +        clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>;
> > > +        resets = <&cpg R9A07G044_USB_PCLK>;
> > > +        power-domains = <&cpg>;

Also, are these all resources of the usbphyctrl block and not just
resources you happen to want in the driver? For example, the
power-domain should be the power island that this block resides in.

> > > +        #phy-cells = <1>;
> > > +    };
> > > --
> > > 2.17.1
> > >
> > >