[PATCH] dt-bindings: Drop redundant minItems/maxItems

[Rob Herring]

On Tue, Jun 22, 2021 at 2:17 AM Geert Uytterhoeven <geert at linux-m68k.org> wrote:
>
> Hi Rob,
>
> On Tue, Jun 15, 2021 at 9:16 PM Rob Herring <robh at kernel.org> wrote:
> > If a property has an 'items' list, then a 'minItems' or 'maxItems' with the
> > same size as the list is redundant and can be dropped. Note that is DT
> > schema specific behavior and not standard json-schema behavior. The tooling
> > will fixup the final schema adding any unspecified minItems/maxItems.
> >
> > This condition is partially checked with the meta-schema already, but
> > only if both 'minItems' and 'maxItems' are equal to the 'items' length.
> > An improved meta-schema is pending.
>
> > Signed-off-by: Rob Herring <robh at kernel.org>
>
> > --- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
> > +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
> > @@ -46,7 +46,6 @@ properties:
> >
> >    clocks:
> >      minItems: 3
> > -    maxItems: 5
> >      items:
> >        - description: GMAC main clock
> >        - description: MAC TX clock
>
> While resolving the conflict with commit fea99822914039c6
> ("dt-bindings: net: document ptp_ref clk in dwmac") in soc/for-next,
> I noticed the following construct for clock-names:
>
>   clock-names:
>     minItems: 3
>     maxItems: 6
>     contains:
>       enum:
>         - stmmaceth
>         - mac-clk-tx
>         - mac-clk-rx
>         - ethstp
>         - eth-ck
>         - ptp_ref
>
> Should this use items instead of enum, and drop maxItems, or is this
> a valid construct to support specifying the clocks in random order?
> If the latter, it does mean that the order of clock-names may not
> match the order of the clock descriptions.

'contains' is true if one or more entries match the strings. So it is
really saying one of these is required. That's not really much of a
constraint. There's 'minContains' and 'maxContains' in newer
json-schema versions (not yet supported) that could add some
constraints if there has to be at least N entries from contains. An
'items' schema (as opposed to a list) would say all items have to
match one of the strings. I'm sure that's too strict.

TLDR: clocks for this binding are a mess and the above is probably all
we can do here.

Rob