[RFC PATCH 3/9] dt-bindings: usb: generic-ohci: increase maximum clocks

[Peter Geis]

On Wed, Jul 28, 2021 at 10:59 AM Heiko Stübner <heiko at sntech.de> wrote:
>
> Hi Peter,
>
> Am Mittwoch, 28. Juli 2021, 14:26:00 CEST schrieb Peter Geis:
> > The rk3568 generic ohci controller has four clocks.
> > Increase the maximum clocks in the documentation to account for this.
> >
> > Signed-off-by: Peter Geis <pgwipeout at gmail.com>
> > ---
> >  Documentation/devicetree/bindings/usb/generic-ohci.yaml | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/Documentation/devicetree/bindings/usb/generic-ohci.yaml b/Documentation/devicetree/bindings/usb/generic-ohci.yaml
> > index 569777a76c90..850996e6f451 100644
> > --- a/Documentation/devicetree/bindings/usb/generic-ohci.yaml
> > +++ b/Documentation/devicetree/bindings/usb/generic-ohci.yaml
> > @@ -59,7 +59,7 @@ properties:
> >
> >    clocks:
> >      minItems: 1
> > -    maxItems: 3
> > +    maxItems: 4
> >      description: |
> >        In case the Renesas R-Car Gen3 SoCs:
> >          - if a host only channel: first clock should be host.
> >
>
> In the patch adding the usb nodes, I see that this 4th clock references
> the clock generated inside usbphy itself.
>
> Does the usb controller actually use that or is this just a way to
> enable the usbphy clock, which in that case should maybe just happen
> on phy-power-on in the phy driver?

I'll check if it works without it.

>
>
> Heiko
>
>