[RFC PATCH 6/9] phy: phy-rockchip-inno-usb2: support muxed interrupts
Peter Geis
pgwipeout at gmail.com
Wed Jul 28 05:26:03 PDT 2021
The rk3568 usb2phy has a single muxed interrupt that handles all
interrupts.
Allow the driver to plug in only a single interrupt as necessary.
This currently only supports the host configuration for the new phy.
Signed-off-by: Peter Geis <pgwipeout at gmail.com>
---
drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 168 +++++++++++++-----
1 file changed, 119 insertions(+), 49 deletions(-)
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index 84a0c1d697da..fdeb2e7c937a 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -204,6 +204,7 @@ struct rockchip_usb2phy_port {
* @dcd_retries: The retry count used to track Data contact
* detection process.
* @edev: extcon device for notification registration
+ * @irq: muxed interrupt for single irq configuration
* @phy_cfg: phy register configuration, assigned by driver data.
* @ports: phy port instance.
*/
@@ -218,6 +219,7 @@ struct rockchip_usb2phy {
enum power_supply_type chg_type;
u8 dcd_retries;
struct extcon_dev *edev;
+ int irq;
const struct rockchip_usb2phy_cfg *phy_cfg;
struct rockchip_usb2phy_port ports[USB2PHY_NUM_PORTS];
};
@@ -934,6 +936,102 @@ static irqreturn_t rockchip_usb2phy_otg_mux_irq(int irq, void *data)
return IRQ_NONE;
}
+static irqreturn_t rockchip_usb2phy_irq(int irq, void *data)
+{
+ struct rockchip_usb2phy *rphy = data;
+ struct rockchip_usb2phy_port *rport;
+ irqreturn_t ret = IRQ_NONE;
+ unsigned int index;
+
+ for (index = 0; index < rphy->phy_cfg->num_ports; index++) {
+ rport = &rphy->ports[index];
+ if (!rport->phy)
+ continue;
+
+ /* Handle linestate irq for both otg port and host port */
+ ret = rockchip_usb2phy_linestate_irq(irq, rport);
+ }
+
+ return ret;
+}
+
+static int rockchip_usb2phy_port_irq_init(struct rockchip_usb2phy *rphy,
+ struct rockchip_usb2phy_port *rport,
+ struct device_node *child_np)
+{
+ int ret;
+
+ /*
+ * If the usb2 phy used combined irq for otg and host port,
+ * don't need to init otg and host port irq separately.
+ */
+ if (rphy->irq > 0)
+ return 0;
+
+ switch (rport->port_id) {
+ case USB2PHY_PORT_HOST:
+ rport->ls_irq = of_irq_get_byname(child_np, "linestate");
+ if (rport->ls_irq < 0) {
+ dev_err(rphy->dev, "no linestate irq provided\n");
+ return rport->ls_irq;
+ }
+
+ ret = devm_request_threaded_irq(rphy->dev, rport->ls_irq, NULL,
+ rockchip_usb2phy_linestate_irq,
+ IRQF_ONESHOT,
+ "rockchip_usb2phy", rport);
+ if (ret) {
+ dev_err(rphy->dev, "failed to request linestate irq handle\n");
+ return ret;
+ }
+ break;
+ case USB2PHY_PORT_OTG:
+ /*
+ * Some SoCs use one interrupt with otg-id/otg-bvalid/linestate
+ * interrupts muxed together, so probe the otg-mux interrupt first,
+ * if not found, then look for the regular interrupts one by one.
+ */
+ rport->otg_mux_irq = of_irq_get_byname(child_np, "otg-mux");
+ if (rport->otg_mux_irq > 0) {
+ ret = devm_request_threaded_irq(rphy->dev, rport->otg_mux_irq,
+ NULL,
+ rockchip_usb2phy_otg_mux_irq,
+ IRQF_ONESHOT,
+ "rockchip_usb2phy_otg",
+ rport);
+ if (ret) {
+ dev_err(rphy->dev,
+ "failed to request otg-mux irq handle\n");
+ return ret;
+ }
+ } else {
+ rport->bvalid_irq = of_irq_get_byname(child_np, "otg-bvalid");
+ if (rport->bvalid_irq < 0) {
+ dev_err(rphy->dev, "no vbus valid irq provided\n");
+ ret = rport->bvalid_irq;
+ return ret;
+ }
+
+ ret = devm_request_threaded_irq(rphy->dev, rport->bvalid_irq,
+ NULL,
+ rockchip_usb2phy_bvalid_irq,
+ IRQF_ONESHOT,
+ "rockchip_usb2phy_bvalid",
+ rport);
+ if (ret) {
+ dev_err(rphy->dev,
+ "failed to request otg-bvalid irq handle\n");
+ return ret;
+ }
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static int rockchip_usb2phy_host_port_init(struct rockchip_usb2phy *rphy,
struct rockchip_usb2phy_port *rport,
struct device_node *child_np)
@@ -947,18 +1045,9 @@ static int rockchip_usb2phy_host_port_init(struct rockchip_usb2phy *rphy,
mutex_init(&rport->mutex);
INIT_DELAYED_WORK(&rport->sm_work, rockchip_usb2phy_sm_work);
- rport->ls_irq = of_irq_get_byname(child_np, "linestate");
- if (rport->ls_irq < 0) {
- dev_err(rphy->dev, "no linestate irq provided\n");
- return rport->ls_irq;
- }
-
- ret = devm_request_threaded_irq(rphy->dev, rport->ls_irq, NULL,
- rockchip_usb2phy_linestate_irq,
- IRQF_ONESHOT,
- "rockchip_usb2phy", rport);
+ ret = rockchip_usb2phy_port_irq_init(rphy, rport, child_np);
if (ret) {
- dev_err(rphy->dev, "failed to request linestate irq handle\n");
+ dev_err(rphy->dev, "failed to setup host irq\n");
return ret;
}
@@ -1007,44 +1096,10 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
INIT_DELAYED_WORK(&rport->chg_work, rockchip_chg_detect_work);
INIT_DELAYED_WORK(&rport->otg_sm_work, rockchip_usb2phy_otg_sm_work);
- /*
- * Some SoCs use one interrupt with otg-id/otg-bvalid/linestate
- * interrupts muxed together, so probe the otg-mux interrupt first,
- * if not found, then look for the regular interrupts one by one.
- */
- rport->otg_mux_irq = of_irq_get_byname(child_np, "otg-mux");
- if (rport->otg_mux_irq > 0) {
- ret = devm_request_threaded_irq(rphy->dev, rport->otg_mux_irq,
- NULL,
- rockchip_usb2phy_otg_mux_irq,
- IRQF_ONESHOT,
- "rockchip_usb2phy_otg",
- rport);
- if (ret) {
- dev_err(rphy->dev,
- "failed to request otg-mux irq handle\n");
- goto out;
- }
- } else {
- rport->bvalid_irq = of_irq_get_byname(child_np, "otg-bvalid");
- if (rport->bvalid_irq < 0) {
- dev_err(rphy->dev, "no vbus valid irq provided\n");
- ret = rport->bvalid_irq;
- goto out;
- }
-
- ret = devm_request_threaded_irq(rphy->dev, rport->bvalid_irq,
- NULL,
- rockchip_usb2phy_bvalid_irq,
- IRQF_ONESHOT,
- "rockchip_usb2phy_bvalid",
- rport);
- if (ret) {
- dev_err(rphy->dev,
- "failed to request otg-bvalid irq handle\n");
- goto out;
- }
- }
+ ret = rockchip_usb2phy_port_irq_init(rphy, rport, child_np);
+ if (ret) {
+ dev_err(rphy->dev, "failed to init irq for host port\n");
+ goto out;
if (!IS_ERR(rphy->edev)) {
rport->event_nb.notifier_call = rockchip_otg_event;
@@ -1124,6 +1179,7 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev)
phy_cfgs = match->data;
rphy->chg_state = USB_CHG_STATE_UNDEFINED;
rphy->chg_type = POWER_SUPPLY_TYPE_UNKNOWN;
+ rphy->irq = platform_get_irq(pdev, 0);
platform_set_drvdata(pdev, rphy);
ret = rockchip_usb2phy_extcon_register(rphy);
@@ -1201,6 +1257,20 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev)
}
provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+ if (rphy->irq > 0) {
+ ret = devm_request_threaded_irq(rphy->dev, rphy->irq, NULL,
+ rockchip_usb2phy_irq,
+ IRQF_ONESHOT,
+ "rockchip_usb2phy",
+ rphy);
+ if (ret) {
+ dev_err(rphy->dev,
+ "failed to request usb2phy irq handle\n");
+ goto put_child;
+ }
+ }
+
return PTR_ERR_OR_ZERO(provider);
put_child:
--
2.25.1
More information about the linux-phy
mailing list