[PATCH v4 06/10] dt-bindings: phy: renesas,usb2-phy: Document RZ/G2L phy bindings

[Biju Das]

Hi Rob,

Thanks for the feedback.

> Subject: Re: [PATCH v4 06/10] dt-bindings: phy: renesas,usb2-phy: Document
> RZ/G2L phy bindings
> 
> On Mon, Jul 19, 2021 at 01:19:34PM +0100, Biju Das wrote:
> > Document USB phy bindings for RZ/G2L SoC.
> >
> > RZ/G2L USB2.0 phy uses line ctrl register for OTG_ID pin changes. It
> > uses a different OTG-BC interrupt bit for device recognition. Apart
> > from this, the PHY reset is controlled by USBPHY control IP and
> > Document reset is a required property.
> >
> > Signed-off-by: Biju Das <biju.das.jz at bp.renesas.com>
> > Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>
> > ---
> > v3->v4:
> >  * Removed second reset
> >  * Added family specific compatible string.
> > v2->v3
> >  * Created a new compatible for RZ/G2L as per Geert's suggestion.
> >  * Added resets required properties for RZ/G2L SoC.
> > ---
> >  .../bindings/phy/renesas,usb2-phy.yaml        | 19 +++++++++++++++++++
> >  1 file changed, 19 insertions(+)
> >
> > diff --git
> > a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
> > b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
> > index d5dc5a3cdceb..151158d7a224 100644
> > --- a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
> > +++ b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
> > @@ -30,6 +30,11 @@ properties:
> >                - renesas,usb2-phy-r8a77995 # R-Car D3
> >            - const: renesas,rcar-gen3-usb2-phy
> >
> > +      - items:
> > +          - enum:
> > +              - renesas,usb2-phy-r9a07g044 # RZ/G2{L,LC}
> > +          - const: renesas,rzg2l-usb2-phy  # RZ/G2L family
> > +
> >    reg:
> >      maxItems: 1
> >
> > @@ -91,6 +96,20 @@ required:
> >    - clocks
> >    - '#phy-cells'
> >
> > +allOf:
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            const: renesas,rzg2l-usb2-phy
> > +    then:
> > +      properties:
> > +        resets:
> > +          description: |
> > +            USB/PHY reset associated with the port.
> 
> You don't need 'properties' part here. Just 'required'.

OK. Will fix this in next version.

Regards,
Biju

> 
> > +      required:
> > +        - resets
> > +
> >  additionalProperties: false
> >
> >  examples:
> > --
> > 2.17.1
> >
> >