[PATCH 2/2] phy: mediatek: phy-mtk-tphy: support USB2UART switch
Macpaul Lin
macpaul.lin at mediatek.com
Tue Jul 27 03:50:13 PDT 2021
Some embedded platform shared PINs between USB and UART.
For example, some phone will use special cable detection in boot loader
to switch USB port function into UART mode.
This patch support USB2UART switch function in phy-mtk-tphy.
1. Implement USB2UART switch API support in phy-mtk-tphy.
2. Use PHY_MODE_UART support according to new mode in phy.h.
3. Use mtk_phy_get_mode_ext() to query the current MODE from hardware.
Signed-off-by: Macpaul Lin <macpaul.lin at mediatek.com>
---
drivers/phy/mediatek/phy-mtk-tphy.c | 114 +++++++++++++++++++++++++++++++++++
1 file changed, 114 insertions(+)
diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c
index cdbcc49..a7dfeec 100644
--- a/drivers/phy/mediatek/phy-mtk-tphy.c
+++ b/drivers/phy/mediatek/phy-mtk-tphy.c
@@ -68,6 +68,7 @@
#define PA6_RG_U2_SQTH_VAL(x) (0xf & (x))
#define U3P_U2PHYACR4 0x020
+#define P2C_RG_USB20_DM_100K_EN BIT(17)
#define P2C_RG_USB20_GPIO_CTL BIT(9)
#define P2C_USB20_GPIO_MODE BIT(8)
#define P2C_U2_GPIO_CTR_MSK (P2C_RG_USB20_GPIO_CTL | P2C_USB20_GPIO_MODE)
@@ -76,6 +77,12 @@
#define P2C_RG_SIF_U2PLL_FORCE_ON BIT(24)
#define U3P_U2PHYDTM0 0x068
+#define P2C_RG_UART_MODE GENMASK(31, 30)
+#define P2C_RG_UART_MODE_VAL(x) ((0x3 & (x)) << 30)
+#define P2C_RG_UART_MODE_OFET (30)
+#define P2C_FORCE_UART_I BIT(29)
+#define P2C_FORCE_UART_BIAS_EN BIT(28)
+#define P2C_FORCE_UART_TX_OE BIT(27)
#define P2C_FORCE_UART_EN BIT(26)
#define P2C_FORCE_DATAIN BIT(23)
#define P2C_FORCE_DM_PULLDOWN BIT(21)
@@ -98,6 +105,8 @@
P2C_RG_DPPULLDOWN | P2C_RG_TERMSEL)
#define U3P_U2PHYDTM1 0x06C
+#define P2C_RG_UART_BIAS_EN BIT(18)
+#define P2C_RG_UART_TX_OE BIT(17)
#define P2C_RG_UART_EN BIT(16)
#define P2C_FORCE_IDDIG BIT(9)
#define P2C_RG_VBUSVALID BIT(5)
@@ -600,6 +609,90 @@ static void u2_phy_instance_exit(struct mtk_tphy *tphy,
}
}
+static void u2_phy_instance_set_mode_2uart(struct u2phy_banks *u2_banks)
+{
+ u32 tmp;
+
+ /* Clear PA6_RG_U2_BC11_SW_EN */
+ tmp = readl(u2_banks->com + U3P_USBPHYACR6);
+ tmp &= ~(PA6_RG_U2_BC11_SW_EN);
+ writel(tmp, u2_banks->com + U3P_USBPHYACR6);
+
+ /* Set P2C_RG_SUSPENDM */
+ tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
+ tmp |= P2C_RG_SUSPENDM;
+ writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
+
+ /* Set P2C_FORCE_SUSPENDM */
+ tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
+ tmp |= P2C_FORCE_SUSPENDM;
+ writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
+
+ /* Clear and Set P2C_RG_UART_MODE to 2'b01 */
+ tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
+ tmp &= ~(P2C_RG_UART_MODE);
+ tmp |= P2C_RG_UART_MODE_VAL(0x1);
+ writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
+
+ /* Clear P2C_FORCE_UART_I */
+ tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
+ tmp &= ~(P2C_FORCE_UART_I);
+ writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
+
+ /* Set P2C_FORCE_UART_BIAS_EN */
+ tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
+ tmp |= P2C_FORCE_UART_BIAS_EN;
+ writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
+
+ /* Set P2C_FORCE_UART_TX_OE */
+ tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
+ tmp |= P2C_FORCE_UART_TX_OE;
+ writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
+
+ /* Set P2C_FORCE_UART_EN */
+ tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
+ tmp |= P2C_FORCE_UART_EN;
+ writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
+
+ /* Set P2C_RG_UART_BIAS_EN */
+ tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
+ tmp |= P2C_RG_UART_BIAS_EN;
+ writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
+
+ /* Set P2C_RG_UART_TX_OE */
+ tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
+ tmp |= P2C_RG_UART_TX_OE;
+ writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
+
+ /* Set P2C_RG_UART_EN */
+ tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
+ tmp |= P2C_RG_UART_EN;
+ writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
+
+ /* Set P2C_RG_USB20_DM_100K_EN */
+ tmp = readl(u2_banks->com + U3P_U2PHYACR4);
+ tmp |= P2C_RG_USB20_DM_100K_EN;
+ writel(tmp, u2_banks->com + U3P_U2PHYACR4);
+
+ /* Clear P2C_RG_DMPULLDOWN, P2C_RG_DPPULLDOWN */
+ tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
+ tmp &= ~(P2C_RG_DPPULLDOWN | P2C_RG_DMPULLDOWN);
+ writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
+}
+
+static int u2_phy_instance_get_mode_ext(struct mtk_tphy *tphy, struct mtk_phy_instance *instance)
+{
+ struct u2phy_banks *u2_banks = &instance->u2_banks;
+ u32 tmp;
+
+ tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
+
+ if ((tmp & P2C_RG_UART_MODE) >> P2C_RG_UART_MODE_OFET)
+ return PHY_MODE_UART;
+ else
+ return PHY_MODE_USB_OTG;
+}
+
static void u2_phy_instance_set_mode(struct mtk_tphy *tphy,
struct mtk_phy_instance *instance,
enum phy_mode mode)
@@ -609,6 +702,9 @@ static void u2_phy_instance_set_mode(struct mtk_tphy *tphy,
tmp = readl(u2_banks->com + U3P_U2PHYDTM1);
switch (mode) {
+ case PHY_MODE_UART:
+ u2_phy_instance_set_mode_2uart(u2_banks);
+ return;
case PHY_MODE_USB_DEVICE:
tmp |= P2C_FORCE_IDDIG | P2C_RG_IDDIG;
break;
@@ -933,6 +1029,10 @@ static int mtk_phy_init(struct phy *phy)
return ret;
}
+ ret = u2_phy_instance_get_mode_ext(tphy, instance);
+ if (ret == PHY_MODE_UART)
+ return 0;
+
switch (instance->type) {
case PHY_TYPE_USB2:
u2_phy_instance_init(tphy, instance);
@@ -996,6 +1096,19 @@ static int mtk_phy_exit(struct phy *phy)
return 0;
}
+static int mtk_phy_get_mode_ext(struct phy *phy)
+{
+ struct mtk_phy_instance *instance = phy_get_drvdata(phy);
+ struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent);
+ int ret;
+
+ ret = 0;
+ if (instance->type == PHY_TYPE_USB2)
+ ret = u2_phy_instance_get_mode_ext(tphy, instance);
+
+ return ret;
+}
+
static int mtk_phy_set_mode(struct phy *phy, enum phy_mode mode, int submode)
{
struct mtk_phy_instance *instance = phy_get_drvdata(phy);
@@ -1060,6 +1173,7 @@ static struct phy *mtk_phy_xlate(struct device *dev,
.power_on = mtk_phy_power_on,
.power_off = mtk_phy_power_off,
.set_mode = mtk_phy_set_mode,
+ .get_mode_ext = mtk_phy_get_mode_ext,
.owner = THIS_MODULE,
};
--
1.7.9.5
More information about the linux-phy
mailing list