[PATCH] dt-bindings: Move fixed string 'patternProperties' to 'properties'
Rob Herring
robh at kernel.org
Tue Jul 13 12:35:14 PDT 2021
There's no need for fixed strings to be under 'patternProperties', so move
them under 'properties' instead.
Cc: Jean Delvare <jdelvare at suse.com>
Cc: Guenter Roeck <linux at roeck-us.net>
Cc: Kishon Vijay Abraham I <kishon at ti.com>
Cc: Vinod Koul <vkoul at kernel.org>
Cc: Saravanan Sekar <sravanhome at gmail.com>
Cc: Mark Brown <broonie at kernel.org>
Cc: Jagan Teki <jagan at amarulasolutions.com>
Cc: Troy Kisky <troy.kisky at boundarydevices.com>
Cc: linux-hwmon at vger.kernel.org
Cc: linux-phy at lists.infradead.org
Cc: linux-spi at vger.kernel.org
Signed-off-by: Rob Herring <robh at kernel.org>
---
.../devicetree/bindings/hwmon/adt7475.yaml | 22 ++++----
.../bindings/phy/ti,phy-j721e-wiz.yaml | 56 +++++++++----------
.../bindings/regulator/mps,mpq7920.yaml | 6 +-
.../regulator/nxp,pf8x00-regulator.yaml | 3 +-
.../bindings/spi/spi-controller.yaml | 32 +++++------
5 files changed, 60 insertions(+), 59 deletions(-)
diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
index ad0ec9f35bd8..7d9c083632b9 100644
--- a/Documentation/devicetree/bindings/hwmon/adt7475.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
@@ -39,17 +39,7 @@ properties:
reg:
maxItems: 1
-patternProperties:
- "^adi,bypass-attenuator-in[0-4]$":
- description: |
- Configures bypassing the individual voltage input attenuator. If
- set to 1 the attenuator is bypassed if set to 0 the attenuator is
- not bypassed. If the property is absent then the attenuator
- retains it's configuration from the bios/bootloader.
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1]
-
- "^adi,pwm-active-state$":
+ adi,pwm-active-state:
description: |
Integer array, represents the active state of the pwm outputs If set to 0
the pwm uses a logic low output for 100% duty cycle. If set to 1 the pwm
@@ -61,6 +51,16 @@ patternProperties:
enum: [0, 1]
default: 1
+patternProperties:
+ "^adi,bypass-attenuator-in[0-4]$":
+ description: |
+ Configures bypassing the individual voltage input attenuator. If
+ set to 1 the attenuator is bypassed if set to 0 the attenuator is
+ not bypassed. If the property is absent then the attenuator
+ retains it's configuration from the bios/bootloader.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
index 5272b6f284ba..dcd63908aeae 100644
--- a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
+++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
@@ -77,6 +77,34 @@ properties:
Type-C spec states minimum CC pin debounce of 100 ms and maximum
of 200 ms. However, some solutions might need more than 200 ms.
+ refclk-dig:
+ type: object
+ description: |
+ WIZ node should have subnode for refclk_dig to select the reference
+ clock source for the reference clock used in the PHY and PMA digital
+ logic.
+ properties:
+ clocks:
+ minItems: 2
+ maxItems: 4
+ description: Phandle to two (Torrent) or four (Sierra) clock nodes representing
+ the inputs to refclk_dig
+
+ "#clock-cells":
+ const: 0
+
+ assigned-clocks:
+ maxItems: 1
+
+ assigned-clock-parents:
+ maxItems: 1
+
+ required:
+ - clocks
+ - "#clock-cells"
+ - assigned-clocks
+ - assigned-clock-parents
+
patternProperties:
"^pll[0|1]-refclk$":
type: object
@@ -121,34 +149,6 @@ patternProperties:
- clocks
- "#clock-cells"
- "^refclk-dig$":
- type: object
- description: |
- WIZ node should have subnode for refclk_dig to select the reference
- clock source for the reference clock used in the PHY and PMA digital
- logic.
- properties:
- clocks:
- minItems: 2
- maxItems: 4
- description: Phandle to two (Torrent) or four (Sierra) clock nodes representing
- the inputs to refclk_dig
-
- "#clock-cells":
- const: 0
-
- assigned-clocks:
- maxItems: 1
-
- assigned-clock-parents:
- maxItems: 1
-
- required:
- - clocks
- - "#clock-cells"
- - assigned-clocks
- - assigned-clock-parents
-
"^serdes@[0-9a-f]+$":
type: object
description: |
diff --git a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
index 12b8963615c3..c2e8c54e5311 100644
--- a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
+++ b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
@@ -36,12 +36,12 @@ properties:
switching frequency must be one of following corresponding value
1.1MHz, 1.65MHz, 2.2MHz, 2.75MHz
- patternProperties:
- "^ldo[1-4]$":
+ ldortc:
type: object
$ref: regulator.yaml#
- "^ldortc$":
+ patternProperties:
+ "^ldo[1-4]$":
type: object
$ref: regulator.yaml#
diff --git a/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml
index 8761437ed8ad..aabf50f5b39e 100644
--- a/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml
@@ -83,7 +83,8 @@ properties:
unevaluatedProperties: false
- "^vsnvs$":
+ properties:
+ vsnvs:
type: object
$ref: regulator.yaml#
description:
diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml
index faef4f6f55b8..8246891602e7 100644
--- a/Documentation/devicetree/bindings/spi/spi-controller.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml
@@ -79,22 +79,7 @@ properties:
description:
The SPI controller acts as a slave, instead of a master.
-allOf:
- - if:
- not:
- required:
- - spi-slave
- then:
- properties:
- "#address-cells":
- const: 1
- else:
- properties:
- "#address-cells":
- const: 0
-
-patternProperties:
- "^slave$":
+ slave:
type: object
properties:
@@ -105,6 +90,7 @@ patternProperties:
required:
- compatible
+patternProperties:
"^.*@[0-9a-f]+$":
type: object
@@ -180,6 +166,20 @@ patternProperties:
- compatible
- reg
+allOf:
+ - if:
+ not:
+ required:
+ - spi-slave
+ then:
+ properties:
+ "#address-cells":
+ const: 1
+ else:
+ properties:
+ "#address-cells":
+ const: 0
+
additionalProperties: true
examples:
--
2.27.0
More information about the linux-phy
mailing list