[PATCH 2/2] phy: qcom-qmp: Add SM8450 PCIe1 PHY support
Bjorn Andersson
bjorn.andersson at linaro.org
Mon Dec 20 21:23:09 PST 2021
On Sat 18 Dec 06:17 PST 2021, Dmitry Baryshkov wrote:
> There are two different PCIe PHYs on SM8450, one having one lane (v5)
> and another with two lanes (v5.20). This commit adds support for the
> second PCIe phy.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson at linaro.org>
Regards,
Bjorn
> ---
> drivers/phy/qualcomm/phy-qcom-qmp.c | 153 ++++++++++++++++++++++++++++
> drivers/phy/qualcomm/phy-qcom-qmp.h | 70 +++++++++++++
> 2 files changed, 223 insertions(+)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
> index 19c17678b999..021e7f439e69 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
> @@ -2957,6 +2957,124 @@ static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_pcs_misc_tbl[] = {
> QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
> };
>
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER1, 0x31),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER2, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE0, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE1, 0x97),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIAS_EN_CLKBUFLR_EN, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_ENABLE1, 0x90),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_EN, 0x46),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_CFG, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE0, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE1, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE1, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE1, 0xd0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE0, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE1, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE1, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_SELECT, 0x34),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_SEL, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_HS_SWITCH_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORECLK_DIV_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORECLK_DIV_MODE1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CMN_MISC1, 0x88),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORE_CLK_EN, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CMN_MODE, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_DC_LEVEL_CTRL, 0x0f),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_TX_LANE_MODE_1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_TX_LANE_MODE_2, 0xf6),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_TX_RES_CODE_LANE_OFFSET_TX, 0x1a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_TX_RES_CODE_LANE_OFFSET_RX, 0x0c),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_PI_CONTROLS, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B1, 0xcc),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B2, 0x12),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B3, 0xcc),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B5, 0x4a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B6, 0x29),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B0, 0xc5),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B1, 0xad),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B2, 0xb6),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B3, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B4, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B5, 0xfb),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B6, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B0, 0xc7),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B1, 0xef),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B2, 0xbf),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B3, 0xa0),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B4, 0x81),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B5, 0xde),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B6, 0x7f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_PHPRE_CTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_AUX_DATA_THRESH_BIN_RATE_0_1, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_AUX_DATA_THRESH_BIN_RATE_2_3, 0x37),
> +
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_DFE_3, 0x05),
> +
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH1_RATE3, 0x1f),
> +
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH2_RATE3, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH3_RATE3, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH4_RATE3, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH5_RATE3, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH6_RATE3, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH1_RATE210, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH2_RATE210, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH3_RATE210, 0x1f),
> +
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_FO_GAIN_RATE2, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_FO_GAIN_RATE3, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_VGA_CAL_MAN_VAL, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_IDAC_SAOFFSET, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_DFE_DAC_ENABLE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_GM_CAL, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_TX_ADAPT_POST_THRESH1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_TX_ADAPT_POST_THRESH2, 0x1f),
> +};
> +
> +/* Register names should be validated, they might be different for this PHY */
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_EQ_CONFIG2, 0x16),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_EQ_CONFIG3, 0x22),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_G3S2_PRE_GAIN, 0x2e),
> + QMP_PHY_INIT_CFG(QPHY_V5_PCS_RX_SIGDET_LVL, 0x99),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_pcs_misc_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
> + QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
> + QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_G4_EQ_CONFIG5, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_EQ_CONFIG1, 0x16),
> + QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_RX_MARGINING_CONFIG3, 0x28),
> + QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_G4_PRE_GAIN, 0x2e),
> +};
> +
> struct qmp_phy;
>
> /* struct qmp_phy_cfg - per-PHY initialization config */
> @@ -4238,6 +4356,38 @@ static const struct qmp_phy_cfg sm8450_qmp_gen3x1_pciephy_cfg = {
> .pwrdn_delay_max = 1005, /* us */
> };
>
> +static const struct qmp_phy_cfg sm8450_qmp_gen4x2_pciephy_cfg = {
> + .type = PHY_TYPE_PCIE,
> + .nlanes = 2,
> +
> + .serdes_tbl = sm8450_qmp_gen4x2_pcie_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_serdes_tbl),
> + .tx_tbl = sm8450_qmp_gen4x2_pcie_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_tx_tbl),
> + .rx_tbl = sm8450_qmp_gen4x2_pcie_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_rx_tbl),
> + .pcs_tbl = sm8450_qmp_gen4x2_pcie_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_pcs_tbl),
> + .pcs_misc_tbl = sm8450_qmp_gen4x2_pcie_pcs_misc_tbl,
> + .pcs_misc_tbl_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_pcs_misc_tbl),
> + .clk_list = sdm845_pciephy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
> + .reset_list = sdm845_pciephy_reset_l,
> + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8250_pcie_regs_layout,
> +
> + .start_ctrl = SERDES_START | PCS_START,
> + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> + .phy_status = PHYSTATUS_4_20,
> +
> + .is_dual_lane_phy = true,
> + .has_pwrdn_delay = true,
> + .pwrdn_delay_min = 995, /* us */
> + .pwrdn_delay_max = 1005, /* us */
> +};
> +
> static const struct qmp_phy_cfg qcm2290_usb3phy_cfg = {
> .type = PHY_TYPE_USB3,
> .nlanes = 1,
> @@ -5899,6 +6049,9 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
> }, {
> .compatible = "qcom,sm8450-qmp-gen3x1-pcie-phy",
> .data = &sm8450_qmp_gen3x1_pciephy_cfg,
> + }, {
> + .compatible = "qcom,sm8450-qmp-gen4x2-pcie-phy",
> + .data = &sm8450_qmp_gen4x2_pciephy_cfg,
> }, {
> .compatible = "qcom,sm8450-qmp-ufs-phy",
> .data = &sm8450_ufsphy_cfg,
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
> index eeeef8d40876..06b2556ed93a 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp.h
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
> @@ -1077,6 +1077,7 @@
> #define QSERDES_V5_COM_SSC_STEP_SIZE2_MODE0 0x028
> #define QSERDES_V5_COM_SSC_STEP_SIZE1_MODE1 0x030
> #define QSERDES_V5_COM_SSC_STEP_SIZE2_MODE1 0x034
> +#define QSERDES_V5_COM_BIAS_EN_CLKBUFLR_EN 0x044
> #define QSERDES_V5_COM_CLK_ENABLE1 0x048
> #define QSERDES_V5_COM_SYSCLK_BUF_ENABLE 0x050
> #define QSERDES_V5_COM_PLL_IVCO 0x058
> @@ -1088,6 +1089,7 @@
> #define QSERDES_V5_COM_PLL_CCTRL_MODE1 0x088
> #define QSERDES_V5_COM_SYSCLK_EN_SEL 0x094
> #define QSERDES_V5_COM_LOCK_CMP_EN 0x0a4
> +#define QSERDES_V5_COM_LOCK_CMP_CFG 0x0a8
> #define QSERDES_V5_COM_LOCK_CMP1_MODE0 0x0ac
> #define QSERDES_V5_COM_LOCK_CMP2_MODE0 0x0b0
> #define QSERDES_V5_COM_LOCK_CMP1_MODE1 0x0b4
> @@ -1109,7 +1111,13 @@
> #define QSERDES_V5_COM_CLK_SELECT 0x154
> #define QSERDES_V5_COM_HSCLK_SEL 0x158
> #define QSERDES_V5_COM_HSCLK_HS_SWITCH_SEL 0x15c
> +#define QSERDES_V5_COM_CORECLK_DIV_MODE0 0x168
> #define QSERDES_V5_COM_CORECLK_DIV_MODE1 0x16c
> +#define QSERDES_V5_COM_CORE_CLK_EN 0x174
> +#define QSERDES_V5_COM_CMN_CONFIG 0x17c
> +#define QSERDES_V5_COM_CMN_MISC1 0x19c
> +#define QSERDES_V5_COM_CMN_MODE 0x1a4
> +#define QSERDES_V5_COM_VCO_DC_LEVEL_CTRL 0x1a8
> #define QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE0 0x1ac
> #define QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE0 0x1b0
> #define QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE1 0x1b4
> @@ -1134,6 +1142,12 @@
> #define QSERDES_V5_TX_PWM_GEAR_3_DIVIDER_BAND0_1 0x180
> #define QSERDES_V5_TX_PWM_GEAR_4_DIVIDER_BAND0_1 0x184
>
> +/* Only for QMP V5_20 PHY - TX registers */
> +#define QSERDES_V5_20_TX_RES_CODE_LANE_OFFSET_TX 0x30
> +#define QSERDES_V5_20_TX_RES_CODE_LANE_OFFSET_RX 0x34
> +#define QSERDES_V5_20_TX_LANE_MODE_1 0x78
> +#define QSERDES_V5_20_TX_LANE_MODE_2 0x7c
> +
> /* Only for QMP V5 PHY - RX registers */
> #define QSERDES_V5_RX_UCDR_FO_GAIN 0x008
> #define QSERDES_V5_RX_UCDR_SO_GAIN 0x014
> @@ -1190,10 +1204,58 @@
> #define QSERDES_V5_RX_DCC_CTRL1 0x1a8
> #define QSERDES_V5_RX_VTH_CODE 0x1b0
>
> +/* Only for QMP V5_20 PHY - RX registers */
> +#define QSERDES_V5_20_RX_UCDR_FO_GAIN_RATE2 0x008
> +#define QSERDES_V5_20_RX_UCDR_FO_GAIN_RATE3 0x00c
> +#define QSERDES_V5_20_RX_UCDR_PI_CONTROLS 0x020
> +#define QSERDES_V5_20_RX_AUX_DATA_THRESH_BIN_RATE_0_1 0x02c
> +#define QSERDES_V5_20_RX_AUX_DATA_THRESH_BIN_RATE_2_3 0x030
> +#define QSERDES_V5_20_RX_RX_IDAC_SAOFFSET 0x07c
> +#define QSERDES_V5_20_RX_DFE_3 0x090
> +#define QSERDES_V5_20_RX_DFE_DAC_ENABLE1 0x0b4
> +#define QSERDES_V5_20_RX_TX_ADAPT_POST_THRESH1 0x0c4
> +#define QSERDES_V5_20_RX_TX_ADAPT_POST_THRESH2 0x0c8
> +#define QSERDES_V5_20_RX_VGA_CAL_MAN_VAL 0x0dc
> +#define QSERDES_V5_20_RX_GM_CAL 0x0ec
> +#define QSERDES_V5_20_RX_RX_EQU_ADAPTOR_CNTRL4 0x108
> +#define QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B1 0x164
> +#define QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B2 0x168
> +#define QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B3 0x16c
> +#define QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B5 0x174
> +#define QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B6 0x178
> +#define QSERDES_V5_20_RX_RX_MODE_RATE2_B0 0x17c
> +#define QSERDES_V5_20_RX_RX_MODE_RATE2_B1 0x180
> +#define QSERDES_V5_20_RX_RX_MODE_RATE2_B2 0x184
> +#define QSERDES_V5_20_RX_RX_MODE_RATE2_B3 0x188
> +#define QSERDES_V5_20_RX_RX_MODE_RATE2_B4 0x18c
> +#define QSERDES_V5_20_RX_RX_MODE_RATE2_B5 0x190
> +#define QSERDES_V5_20_RX_RX_MODE_RATE2_B6 0x194
> +#define QSERDES_V5_20_RX_RX_MODE_RATE3_B0 0x198
> +#define QSERDES_V5_20_RX_RX_MODE_RATE3_B1 0x19c
> +#define QSERDES_V5_20_RX_RX_MODE_RATE3_B2 0x1a0
> +#define QSERDES_V5_20_RX_RX_MODE_RATE3_B3 0x1a4
> +#define QSERDES_V5_20_RX_RX_MODE_RATE3_B4 0x1a8
> +#define QSERDES_V5_20_RX_RX_MODE_RATE3_B5 0x1ac
> +#define QSERDES_V5_20_RX_RX_MODE_RATE3_B6 0x1b0
> +#define QSERDES_V5_20_RX_PHPRE_CTRL 0x1b4
> +#define QSERDES_V5_20_RX_DFE_CTLE_POST_CAL_OFFSET 0x1c0
> +#define QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH1_RATE210 0x1f4
> +#define QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH1_RATE3 0x1f8
> +#define QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH2_RATE210 0x1fc
> +#define QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH2_RATE3 0x200
> +#define QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH3_RATE210 0x204
> +#define QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH3_RATE3 0x208
> +#define QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH4_RATE3 0x210
> +#define QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH5_RATE3 0x218
> +#define QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH6_RATE3 0x220
> +
> /* Only for QMP V5 PHY - USB/PCIe PCS registers */
> #define QPHY_V5_PCS_REFGEN_REQ_CONFIG1 0x0dc
> +#define QPHY_V5_PCS_G3S2_PRE_GAIN 0x170
> #define QPHY_V5_PCS_RX_SIGDET_LVL 0x188
> #define QPHY_V5_PCS_RATE_SLEW_CNTRL1 0x198
> +#define QPHY_V5_PCS_EQ_CONFIG2 0x1e0
> +#define QPHY_V5_PCS_EQ_CONFIG3 0x1e4
>
> /* Only for QMP V5 PHY - PCS_PCIE registers */
> #define QPHY_V5_PCS_PCIE_ENDPOINT_REFCLK_DRIVE 0x20
> @@ -1201,6 +1263,14 @@
> #define QPHY_V5_PCS_PCIE_OSC_DTCT_ACTIONS 0x94
> #define QPHY_V5_PCS_PCIE_EQ_CONFIG2 0xa8
>
> +/* Only for QMP V5_20 PHY - PCIe PCS registers */
> +#define QPHY_V5_20_PCS_PCIE_ENDPOINT_REFCLK_DRIVE 0x01c
> +#define QPHY_V5_20_PCS_PCIE_OSC_DTCT_ACTIONS 0x090
> +#define QPHY_V5_20_PCS_PCIE_EQ_CONFIG1 0x0a0
> +#define QPHY_V5_20_PCS_PCIE_G4_EQ_CONFIG5 0x108
> +#define QPHY_V5_20_PCS_PCIE_G4_PRE_GAIN 0x15c
> +#define QPHY_V5_20_PCS_PCIE_RX_MARGINING_CONFIG3 0x184
> +
> /* Only for QMP V5 PHY - UFS PCS registers */
> #define QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_MSB 0x00c
> #define QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_LSB 0x010
> --
> 2.34.1
>
More information about the linux-phy
mailing list