[PATCH v3 03/10] phy: qcom-qmp: Add SM8450 PCIe0 PHY support
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Wed Dec 15 17:28:39 PST 2021
On Thu, 16 Dec 2021 at 01:37, Bjorn Andersson
<bjorn.andersson at linaro.org> wrote:
>
> On Fri 10 Dec 20:17 CST 2021, Dmitry Baryshkov wrote:
>
> > There are two different PCIe PHYs on SM8450, one having one lane (v5)
> > and another with two lanes (v5.20). This commit adds support for the
> > first PCIe phy only, support for the second PCIe PHY is coming in next
> > commits.
> >
> > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
>
> Reviewed-by: Bjorn Andersson <bjorn.andersson at linaro.org>
>
> Note that this is going to be merged separately from the PCIe controller
> patches, sending them in separate series would make that clearer to the
> maintainers.
Hmm. If you think it would be better, I can split it into 3 series:
- PCIe RC
- PCIe PHY
- dts changes
Does that make sense?
>
> Regards,
> Bjorn
>
> > ---
> > drivers/phy/qualcomm/phy-qcom-qmp.c | 125 ++++++++++++++++++++++++++++
> > drivers/phy/qualcomm/phy-qcom-qmp.h | 33 ++++++++
> > 2 files changed, 158 insertions(+)
> >
> > diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
> > index a959c97a699f..19c17678b999 100644
> > --- a/drivers/phy/qualcomm/phy-qcom-qmp.c
> > +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
> > @@ -2866,6 +2866,97 @@ static const struct qmp_phy_init_tbl qcm2290_usb3_pcs_tbl[] = {
> > QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x88),
> > };
> >
> > +static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_serdes_tbl[] = {
> > + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0x08),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_SELECT, 0x34),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORECLK_DIV_MODE1, 0x08),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_IVCO, 0x0f),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_EN, 0x42),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE1_MODE0, 0x24),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE2_MODE1, 0x03),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE1_MODE1, 0xb4),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x02),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE0, 0x82),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE0, 0x03),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE0, 0x55),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE0, 0x55),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE0, 0x1a),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE0, 0x0a),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE1, 0x68),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE1, 0x02),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE1, 0xaa),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE1, 0xab),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE1, 0x34),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE1, 0x14),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_SEL, 0x01),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE0, 0x06),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE0, 0x16),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE0, 0x36),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE1, 0x06),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE1, 0x16),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE1, 0x36),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x18),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xa2),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_BUF_ENABLE, 0x07),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_EN_CENTER, 0x01),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER1, 0x31),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER2, 0x01),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE0, 0xde),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE0, 0x07),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE1, 0x4c),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE1, 0x06),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_ENABLE1, 0x90),
> > +};
> > +
> > +static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_tx_tbl[] = {
> > + QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x20),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0x75),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x3f),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x16),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x04),
> > +};
> > +
> > +static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_rx_tbl[] = {
> > + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0x7f),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0xff),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xbf),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3f),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xd8),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0xdc),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0xdc),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0x5c),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x34),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa6),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH3, 0x34),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH4, 0x38),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x07),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0xf0),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_RX_TX_ADAPT_POST_THRESH, 0xf0),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x07),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x09),
> > + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
> > +};
> > +
> > +static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_pcs_tbl[] = {
> > + QMP_PHY_INIT_CFG(QPHY_V5_PCS_RX_SIGDET_LVL, 0x77),
> > + QMP_PHY_INIT_CFG(QPHY_V5_PCS_RATE_SLEW_CNTRL1, 0x0b),
> > + QMP_PHY_INIT_CFG(QPHY_V5_PCS_REFGEN_REQ_CONFIG1, 0x05),
> > +};
> > +
> > +static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_pcs_misc_tbl[] = {
> > + QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
> > + QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_INT_AUX_CLK_CONFIG1, 0x00),
> > + QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_EQ_CONFIG2, 0x0f),
> > + QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
> > +};
> > +
> > struct qmp_phy;
> >
> > /* struct qmp_phy_cfg - per-PHY initialization config */
> > @@ -4116,6 +4207,37 @@ static const struct qmp_phy_cfg sm8450_ufsphy_cfg = {
> > .is_dual_lane_phy = true,
> > };
> >
> > +static const struct qmp_phy_cfg sm8450_qmp_gen3x1_pciephy_cfg = {
> > + .type = PHY_TYPE_PCIE,
> > + .nlanes = 1,
> > +
> > + .serdes_tbl = sm8450_qmp_gen3x1_pcie_serdes_tbl,
> > + .serdes_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_serdes_tbl),
> > + .tx_tbl = sm8450_qmp_gen3x1_pcie_tx_tbl,
> > + .tx_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_tx_tbl),
> > + .rx_tbl = sm8450_qmp_gen3x1_pcie_rx_tbl,
> > + .rx_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_rx_tbl),
> > + .pcs_tbl = sm8450_qmp_gen3x1_pcie_pcs_tbl,
> > + .pcs_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_pcs_tbl),
> > + .pcs_misc_tbl = sm8450_qmp_gen3x1_pcie_pcs_misc_tbl,
> > + .pcs_misc_tbl_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_pcs_misc_tbl),
> > + .clk_list = sdm845_pciephy_clk_l,
> > + .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
> > + .reset_list = sdm845_pciephy_reset_l,
> > + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
> > + .vreg_list = qmp_phy_vreg_l,
> > + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> > + .regs = sm8250_pcie_regs_layout,
> > +
> > + .start_ctrl = SERDES_START | PCS_START,
> > + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> > + .phy_status = PHYSTATUS,
> > +
> > + .has_pwrdn_delay = true,
> > + .pwrdn_delay_min = 995, /* us */
> > + .pwrdn_delay_max = 1005, /* us */
> > +};
> > +
> > static const struct qmp_phy_cfg qcm2290_usb3phy_cfg = {
> > .type = PHY_TYPE_USB3,
> > .nlanes = 1,
> > @@ -5774,6 +5896,9 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
> > }, {
> > .compatible = "qcom,sm8350-qmp-usb3-uni-phy",
> > .data = &sm8350_usb3_uniphy_cfg,
> > + }, {
> > + .compatible = "qcom,sm8450-qmp-gen3x1-pcie-phy",
> > + .data = &sm8450_qmp_gen3x1_pciephy_cfg,
> > }, {
> > .compatible = "qcom,sm8450-qmp-ufs-phy",
> > .data = &sm8450_ufsphy_cfg,
> > diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
> > index e15f461065bb..08422037f81b 100644
> > --- a/drivers/phy/qualcomm/phy-qcom-qmp.h
> > +++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
> > @@ -1069,6 +1069,15 @@
> > #define QPHY_V4_20_PCS_LANE1_INSIG_MX_CTRL2 0x828
> >
> > /* Only for QMP V5 PHY - QSERDES COM registers */
> > +#define QSERDES_V5_COM_SSC_EN_CENTER 0x010
> > +#define QSERDES_V5_COM_SSC_PER1 0x01c
> > +#define QSERDES_V5_COM_SSC_PER2 0x020
> > +#define QSERDES_V5_COM_SSC_STEP_SIZE1_MODE0 0x024
> > +#define QSERDES_V5_COM_SSC_STEP_SIZE2_MODE0 0x028
> > +#define QSERDES_V5_COM_SSC_STEP_SIZE1_MODE1 0x030
> > +#define QSERDES_V5_COM_SSC_STEP_SIZE2_MODE1 0x034
> > +#define QSERDES_V5_COM_CLK_ENABLE1 0x048
> > +#define QSERDES_V5_COM_SYSCLK_BUF_ENABLE 0x050
> > #define QSERDES_V5_COM_PLL_IVCO 0x058
> > #define QSERDES_V5_COM_CP_CTRL_MODE0 0x074
> > #define QSERDES_V5_COM_CP_CTRL_MODE1 0x078
> > @@ -1084,10 +1093,22 @@
> > #define QSERDES_V5_COM_DEC_START_MODE0 0x0bc
> > #define QSERDES_V5_COM_LOCK_CMP2_MODE1 0x0b8
> > #define QSERDES_V5_COM_DEC_START_MODE1 0x0c4
> > +#define QSERDES_V5_COM_DIV_FRAC_START1_MODE0 0x0cc
> > +#define QSERDES_V5_COM_DIV_FRAC_START2_MODE0 0x0d0
> > +#define QSERDES_V5_COM_DIV_FRAC_START3_MODE0 0x0d4
> > +#define QSERDES_V5_COM_DIV_FRAC_START1_MODE1 0x0d8
> > +#define QSERDES_V5_COM_DIV_FRAC_START2_MODE1 0x0dc
> > +#define QSERDES_V5_COM_DIV_FRAC_START3_MODE1 0x0e0
> > #define QSERDES_V5_COM_VCO_TUNE_MAP 0x10c
> > +#define QSERDES_V5_COM_VCO_TUNE1_MODE0 0x110
> > +#define QSERDES_V5_COM_VCO_TUNE2_MODE0 0x114
> > +#define QSERDES_V5_COM_VCO_TUNE1_MODE1 0x118
> > +#define QSERDES_V5_COM_VCO_TUNE2_MODE1 0x11c
> > #define QSERDES_V5_COM_VCO_TUNE_INITVAL2 0x124
> > +#define QSERDES_V5_COM_CLK_SELECT 0x154
> > #define QSERDES_V5_COM_HSCLK_SEL 0x158
> > #define QSERDES_V5_COM_HSCLK_HS_SWITCH_SEL 0x15c
> > +#define QSERDES_V5_COM_CORECLK_DIV_MODE1 0x16c
> > #define QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE0 0x1ac
> > #define QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE0 0x1b0
> > #define QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE1 0x1b4
> > @@ -1130,6 +1151,7 @@
> > #define QSERDES_V5_RX_AC_JTAG_ENABLE 0x068
> > #define QSERDES_V5_RX_AC_JTAG_MODE 0x078
> > #define QSERDES_V5_RX_RX_TERM_BW 0x080
> > +#define QSERDES_V5_RX_TX_ADAPT_POST_THRESH 0x0cc
> > #define QSERDES_V5_RX_VGA_CAL_CNTRL1 0x0d4
> > #define QSERDES_V5_RX_VGA_CAL_CNTRL2 0x0d8
> > #define QSERDES_V5_RX_GM_CAL 0x0dc
> > @@ -1167,6 +1189,17 @@
> > #define QSERDES_V5_RX_DCC_CTRL1 0x1a8
> > #define QSERDES_V5_RX_VTH_CODE 0x1b0
> >
> > +/* Only for QMP V5 PHY - USB/PCIe PCS registers */
> > +#define QPHY_V5_PCS_REFGEN_REQ_CONFIG1 0x0dc
> > +#define QPHY_V5_PCS_RX_SIGDET_LVL 0x188
> > +#define QPHY_V5_PCS_RATE_SLEW_CNTRL1 0x198
> > +
> > +/* Only for QMP V5 PHY - PCS_PCIE registers */
> > +#define QPHY_V5_PCS_PCIE_ENDPOINT_REFCLK_DRIVE 0x20
> > +#define QPHY_V5_PCS_PCIE_INT_AUX_CLK_CONFIG1 0x54
> > +#define QPHY_V5_PCS_PCIE_OSC_DTCT_ACTIONS 0x94
> > +#define QPHY_V5_PCS_PCIE_EQ_CONFIG2 0xa8
> > +
> > /* Only for QMP V5 PHY - UFS PCS registers */
> > #define QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_MSB 0x00c
> > #define QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_LSB 0x010
> > --
> > 2.33.0
> >
--
With best wishes
Dmitry
More information about the linux-phy
mailing list