[PATCH v2 07/10] arm64: dts: qcom: sm8450: add PCIe0 PHY node

[Dmitry Baryshkov]

On 10/12/2021 14:37, Manivannan Sadhasivam wrote:
> On Wed, Dec 08, 2021 at 08:14:39PM +0300, Dmitry Baryshkov wrote:
>> Add device tree node for the first PCIe PHY device found on the Qualcomm
>> SM8450 platform.
>>
>> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
>> ---
>>   arch/arm64/boot/dts/qcom/sm8450.dtsi | 42 ++++++++++++++++++++++++++--
>>   1 file changed, 40 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
>> index 16a789cacb65..a047d8a22897 100644
>> --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
>> @@ -558,8 +558,12 @@ gcc: clock-controller at 100000 {
>>   			#clock-cells = <1>;
>>   			#reset-cells = <1>;
>>   			#power-domain-cells = <1>;
>> -			clock-names = "bi_tcxo", "sleep_clk";
>> -			clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
>> +			clocks = <&rpmhcc RPMH_CXO_CLK>,
>> +				 <&pcie0_lane>,
>> +				 <&sleep_clk>;
>> +			clock-names = "bi_tcxo",
>> +				      "pcie_0_pipe_clk",
>> +				      "sleep_clk";
>>   		};
>>   
>>   		qupv3_id_0: geniqup at 9c0000 {
>> @@ -625,6 +629,40 @@ i2c14: i2c at a98000 {
>>   			};
>>   		};
>>   
>> +		pcie0_phy: phy at 1c06000 {
>> +			compatible = "qcom,sm8450-qmp-gen3x1-pcie-phy";
>> +			reg = <0 0x01c06000 0 0x200>;
>> +			#address-cells = <2>;
>> +			#size-cells = <2>;
>> +			ranges;
>> +			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
>> +				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
>> +				 <&gcc GCC_PCIE_0_CLKREF_EN>,
>> +				 <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
>> +			clock-names = "aux", "cfg_ahb", "ref", "refgen";
>> +
>> +			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
>> +			reset-names = "phy";
>> +
>> +			assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
>> +			assigned-clock-rates = <100000000>;
>> +
>> +			status = "disabled";
>> +
>> +			pcie0_lane: lanes at 1c06200 {
>> +				reg = <0 0x1c06e00 0 0x200>, /* tx */
>> +				      <0 0x1c07000 0 0x200>, /* rx */
>> +				      <0 0x1c06200 0 0x200>, /* pcs */
> 
> Oh, so this platform has "PCS" at the starting offset? This is different
> compared to other platforms as "TX" always comes first.
> 

Yes. this is correct.


> And the size is "0x200" for all?

It is for the PCS block.

As you see below, PCS_PCIE starts at 0x600. Initially I thought about 
extend it further, making it cover few other regions (up to the tx 
region). However as we do not touch other regions, I decided to keep it 
as this way.

> 
> Thanks,
> Mani
> 
>> +				      <0 0x1c06600 0 0x200>; /* pcs_pcie */
>> +				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
>> +				clock-names = "pipe0";
>> +
>> +				#clock-cells = <0>;
>> +				#phy-cells = <0>;
>> +				clock-output-names = "pcie_0_pipe_clk";
>> +			};
>> +		};
>> +
>>   		config_noc: interconnect at 1500000 {
>>   			compatible = "qcom,sm8450-config-noc";
>>   			reg = <0 0x01500000 0 0x1c000>;
>> -- 
>> 2.33.0
>>


-- 
With best wishes
Dmitry