[PATCH phy v2 3/6] arm64: dts: marvell: armada-37xx: Add xtal clock to comphy node

[Marek Behún]

From: Pali Rohár <pali at kernel.org>

Kernel driver phy-mvebu-a3700-comphy.c needs to know the rate of the
reference xtal clock. So add missing xtal clock source into comphy device
tree node. If the property is not present, the driver defaults to 25 MHz
xtal rate (which, as far as we know, is used by all the existing boards).

Signed-off-by: Pali Rohár <pali at kernel.org>
Signed-off-by: Marek Behún <kabel at kernel.org>
---
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index 9acc5d2b5a00..673f4906eef9 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -265,6 +265,8 @@ comphy: phy at 18300 {
 					    "lane2_sata_usb3";
 				#address-cells = <1>;
 				#size-cells = <0>;
+				clocks = <&xtalclk>;
+				clock-names = "xtal";
 
 				comphy0: phy at 0 {
 					reg = <0>;
-- 
2.32.0