[PATCH v3 6/8] dt-bindings: net: Convert SYSTEMPORT to YAML

[Florian Fainelli]

Convert the Broadcom SYSTEMPORT Ethernet controller Device Tree binding
to YAML.

Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
---
 .../bindings/net/brcm,systemport.txt          | 38 ---------
 .../bindings/net/brcm,systemport.yaml         | 82 +++++++++++++++++++
 MAINTAINERS                                   |  1 +
 3 files changed, 83 insertions(+), 38 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/net/brcm,systemport.txt
 create mode 100644 Documentation/devicetree/bindings/net/brcm,systemport.yaml

diff --git a/Documentation/devicetree/bindings/net/brcm,systemport.txt b/Documentation/devicetree/bindings/net/brcm,systemport.txt
deleted file mode 100644
index 75736739bfdd..000000000000
--- a/Documentation/devicetree/bindings/net/brcm,systemport.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-* Broadcom BCM7xxx Ethernet Systemport Controller (SYSTEMPORT)
-
-Required properties:
-- compatible: should be one of:
-	      "brcm,systemport-v1.00"
-	      "brcm,systemportlite-v1.00" or
-	      "brcm,systemport"
-- reg: address and length of the register set for the device.
-- interrupts: interrupts for the device, first cell must be for the rx
-  interrupts, and the second cell should be for the transmit queues. An
-  optional third interrupt cell for Wake-on-LAN can be specified
-- local-mac-address: Ethernet MAC address (48 bits) of this adapter
-- phy-mode: Should be a string describing the PHY interface to the
-  Ethernet switch/PHY, see Documentation/devicetree/bindings/net/ethernet.txt
-- fixed-link: see Documentation/devicetree/bindings/net/fixed-link.txt for
-  the property specific details
-
-Optional properties:
-- systemport,num-tier2-arb: number of tier 2 arbiters, an integer
-- systemport,num-tier1-arb: number of tier 1 arbiters, an integer
-- systemport,num-txq: number of HW transmit queues, an integer
-- systemport,num-rxq: number of HW receive queues, an integer
-- clocks: When provided, must be two phandles to the functional clocks nodes of
-  the SYSTEMPORT block. The first phandle is the main SYSTEMPORT clock used
-  during normal operation, while the second phandle is the Wake-on-LAN clock.
-- clock-names: When provided, names of the functional clock phandles, first
-  name should be "sw_sysport" and second should be "sw_sysportwol".
-
-Example:
-ethernet at f04a0000 {
-	compatible = "brcm,systemport-v1.00";
-	reg = <0xf04a0000 0x4650>;
-	local-mac-address = [ 00 11 22 33 44 55 ];
-	fixed-link = <0 1 1000 0 0>;
-	phy-mode = "gmii";
-	interrupts = <0x0 0x16 0x0>,
-		<0x0 0x17 0x0>;
-};
diff --git a/Documentation/devicetree/bindings/net/brcm,systemport.yaml b/Documentation/devicetree/bindings/net/brcm,systemport.yaml
new file mode 100644
index 000000000000..44781027ed37
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/brcm,systemport.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/brcm,systemport.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM7xxx Ethernet Systemport Controller (SYSTEMPORT)
+
+maintainers:
+  - Florian Fainelli <f.fainelli at gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - brcm,systemport-v1.00
+      - brcm,systemportlite-v1.00
+      - brcm,systemport
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 2
+    items:
+      - description: interrupt line for RX queues
+      - description: interrupt line for TX queues
+      - description: interrupt line for Wake-on-LAN
+
+  clocks:
+    items:
+      - description: main clock
+      - description: Wake-on-LAN clock
+
+  clock-names:
+    items:
+      - const: sw_sysport
+      - const: sw_sysportwol
+
+  "systemport,num-tier2-arb":
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Number of tier 2 arbiters
+
+  "systemport,num-tier1-arb":
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Number of tier 2 arbiters
+
+  "systemport,num-txq":
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Number of HW transmit queues
+
+  "systemport,num-rxq":
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Number of HW receive queues
+
+required:
+  - reg
+  - interrupts
+  - phy-mode
+
+allOf:
+  - $ref: "ethernet-controller.yaml#"
+
+additionalProperties: true
+
+examples:
+  - |
+    ethernet at f04a0000 {
+        compatible = "brcm,systemport-v1.00";
+        reg = <0xf04a0000 0x4650>;
+        local-mac-address = [ 00 11 22 33 44 55 ];
+        phy-mode = "gmii";
+        interrupts = <0x0 0x16 0x0>,
+                     <0x0 0x17 0x0>;
+        fixed-link {
+            speed = <1000>;
+            full-duplex;
+        };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 404e76d625f1..ed8de605fe4b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3972,6 +3972,7 @@ L:	netdev at vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/broadcom/bcmsysport.*
 F:	drivers/net/ethernet/broadcom/unimac.h
+F:	Documentation/devicetree/bindings/net/brcm,systemport.yaml
 
 BROADCOM TG3 GIGABIT ETHERNET DRIVER
 M:	Siva Reddy Kallam <siva.kallam at broadcom.com>
-- 
2.25.1