[PATCH v1 05/10] PCI: qcom: add flag to enable use of ddrss_sf_tbu clock

[Dmitry Baryshkov]

Qualcomm PCIe driver uses compatible string to check if the ddrss_sf_tbu
clock should be used. Since sc7280 support has added flags, switch to
the new mechanism to check if this clock should be used.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 64f762cdbc7d..e51b313da46f 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -194,7 +194,9 @@ struct qcom_pcie_ops {
 
 struct qcom_pcie_cfg {
 	const struct qcom_pcie_ops *ops;
+	/* flags for ops 2.7.0 and 1.9.0 */
 	unsigned int pipe_clk_need_muxing:1;
+	unsigned int has_ddrss_sf_tbu_clk:1;
 };
 
 struct qcom_pcie {
@@ -1164,7 +1166,7 @@ static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie)
 	res->clks[3].id = "bus_slave";
 	res->clks[4].id = "slave_q2a";
 	res->clks[5].id = "tbu";
-	if (of_device_is_compatible(dev->of_node, "qcom,pcie-sm8250")) {
+	if (pcie->cfg.has_ddrss_sf_tbu_clk) {
 		res->clks[6].id = "ddrss_sf_tbu";
 		res->num_clks = 7;
 	} else {
@@ -1515,6 +1517,7 @@ static const struct qcom_pcie_cfg sdm845_cfg = {
 
 static const struct qcom_pcie_cfg sm8250_cfg = {
 	.ops = &ops_1_9_0,
+	.has_ddrss_sf_tbu_clk = true,
 };
 
 static const struct qcom_pcie_cfg sc7280_cfg = {
-- 
2.33.0