[PATCH v1 01/10] dt-bindings: pci: qcom: Document PCIe bindings for SM8450

[Dmitry Baryshkov]

Document the PCIe DT bindings for SM8450 SoC.The PCIe IP is similar
to the one used on SM8250. Add the compatible for SM8450.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
 .../devicetree/bindings/pci/qcom,pcie.txt     | 21 ++++++++++++++++++-
 1 file changed, 20 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
index a0ae024c2d0c..73bc763c5009 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
@@ -15,6 +15,7 @@
 			- "qcom,pcie-sc8180x" for sc8180x
 			- "qcom,pcie-sdm845" for sdm845
 			- "qcom,pcie-sm8250" for sm8250
+			- "qcom,pcie-sm8450" for sm8450
 			- "qcom,pcie-ipq6018" for ipq6018
 
 - reg:
@@ -169,6 +170,24 @@
 			- "ddrss_sf_tbu" PCIe SF TBU clock
 			- "pipe"	PIPE clock
 
+- clock-names:
+	Usage: required for sm8450
+	Value type: <stringlist>
+	Definition: Should contain the following entries
+			- "aux"         Auxiliary clock
+			- "cfg"         Configuration clock
+			- "bus_master"  Master AXI clock
+			- "bus_slave"   Slave AXI clock
+			- "slave_q2a"   Slave Q2A clock
+			- "tbu"         PCIe TBU clock
+			- "ddrss_sf_tbu" PCIe SF TBU clock
+			- "pipe"        PIPE clock
+			- "pipe_mux"    PIPE MUX
+			- "phy_pipe"    PIPE output clock
+			- "ref"         REFERENCE clock
+			- "aggre0"	Aggre NoC PCIe0 AXI clock
+			- "aggre1"	Aggre NoC PCIe1 AXI clock
+
 - resets:
 	Usage: required
 	Value type: <prop-encoded-array>
@@ -246,7 +265,7 @@
 			- "ahb"			AHB reset
 
 - reset-names:
-	Usage: required for sc8180x, sdm845 and sm8250
+	Usage: required for sc8180x, sdm845, sm8250 and sm8450
 	Value type: <stringlist>
 	Definition: Should contain the following entries
 			- "pci"			PCIe core reset
-- 
2.33.0