[PATCH v6 5/8] phy: freescale: pcie: Initialize the imx8 pcie standalone phy driver

[Hongxing Zhu]

> -----Original Message-----
> From: Vinod Koul <vkoul at kernel.org>
> Sent: Thursday, December 2, 2021 12:30 PM
> To: Hongxing Zhu <hongxing.zhu at nxp.com>
> Cc: l.stach at pengutronix.de; bhelgaas at google.com;
> lorenzo.pieralisi at arm.com; Marcel Ziswiler
> <marcel.ziswiler at toradex.com>; tharvey at gateworks.com;
> kishon at ti.com; robh at kernel.org; galak at kernel.crashing.org;
> shawnguo at kernel.org; linux-phy at lists.infradead.org;
> devicetree at vger.kernel.org; linux-pci at vger.kernel.org;
> linux-arm-kernel at lists.infradead.org; linux-kernel at vger.kernel.org;
> kernel at pengutronix.de; dl-linux-imx <linux-imx at nxp.com>
> Subject: Re: [PATCH v6 5/8] phy: freescale: pcie: Initialize the imx8 pcie
> standalone phy driver
> 
> On 18-11-21, 09:54, Richard Zhu wrote:
> > Add the standalone i.MX8 PCIe PHY driver.
> >
> > Signed-off-by: Richard Zhu <hongxing.zhu at nxp.com>
> > Tested-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
> > Reviewed-by: Tim Harvey <tharvey at gateworks.com>
> > Tested-by: Tim Harvey <tharvey at gateworks.com>
> > ---
> >  drivers/phy/freescale/Kconfig              |   9 +
> >  drivers/phy/freescale/Makefile             |   1 +
> >  drivers/phy/freescale/phy-fsl-imx8m-pcie.c | 237
> > +++++++++++++++++++++
> >  3 files changed, 247 insertions(+)
> >  create mode 100644 drivers/phy/freescale/phy-fsl-imx8m-pcie.c
> >
> > diff --git a/drivers/phy/freescale/Kconfig
> > b/drivers/phy/freescale/Kconfig index 320630ffe3cd..e821498b1f7f
> > 100644
> > --- a/drivers/phy/freescale/Kconfig
> > +++ b/drivers/phy/freescale/Kconfig
> > @@ -14,3 +14,12 @@ config PHY_MIXEL_MIPI_DPHY
> >  	help
> >  	  Enable this to add support for the Mixel DSI PHY as found
> >  	  on NXP's i.MX8 family of SOCs.
> > +
> > +config PHY_FSL_IMX8M_PCIE
> > +	tristate "Freescale i.MX8M PCIE PHY"
> > +	depends on OF && HAS_IOMEM
> > +	select GENERIC_PHY
> > +	default ARCH_MXC && ARM64
> 
> Why should this be default ? We dont do that for new drivers.. You may
> add this to respective config file though...
> 
[Richard Zhu] First of all, thanks a lot for your review comments.
I see, and would remove the default in the kconfig.

> > +static int imx8_pcie_phy_init(struct phy *phy) {
> > +	int ret;
> > +	u32 val, pad_mode;
> > +	struct imx8_pcie_phy *imx8_phy = phy_get_drvdata(phy);
> > +
> > +	reset_control_assert(imx8_phy->reset);
> > +
> > +	pad_mode = imx8_phy->refclk_pad_mode;
> > +	/* Set AUX_EN_OVERRIDE 1'b0, when the CLKREQ# isn't hooked */
> > +	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> > +			   IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE,
> > +			   imx8_phy->clkreq_unused ?
> > +			   0 : IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE);
> > +	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> > +			   IMX8MM_GPR_PCIE_AUX_EN,
> > +			   IMX8MM_GPR_PCIE_AUX_EN);
> > +	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> > +			   IMX8MM_GPR_PCIE_POWER_OFF, 0);
> > +	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> > +			   IMX8MM_GPR_PCIE_SSC_EN, 0);
> > +
> > +	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> > +			   IMX8MM_GPR_PCIE_REF_CLK_SEL,
> > +			   pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT ?
> > +			   IMX8MM_GPR_PCIE_REF_CLK_EXT :
> > +			   IMX8MM_GPR_PCIE_REF_CLK_PLL);
> > +	usleep_range(100, 200);
> > +
> > +	/* Do the PHY common block reset */
> > +	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> > +			   IMX8MM_GPR_PCIE_CMN_RST,
> > +			   IMX8MM_GPR_PCIE_CMN_RST);
> > +	usleep_range(200, 500);
> > +
> > +
> 
> No multi blank line please
[Richard Zhu] Ok, got that.
> 
> > +static struct platform_driver imx8_pcie_phy_driver = {
> > +	.probe	= imx8_pcie_phy_probe,
> > +	.driver = {
> > +		.name	= "imx8-pcie-phy",
> > +		.of_match_table	= imx8_pcie_phy_of_match,
> > +	}
> > +};
> > +module_platform_driver(imx8_pcie_phy_driver);
> > +
> > +MODULE_DESCRIPTION("FSL IMX8 PCIE PHY driver");
> > +MODULE_LICENSE("GPL");
> 
> This does not match the SPDX tag you have given
[Richard Zhu] Should the "GPL v2" correct one?
If yes, I would change it this way later.
Thanks.

Best Regards
Richard
> 
> --
> ~Vinod