[PATCH v2 2/8] dt-bindings: phy: phy-rockchip-inno-usb2: add rk3568 documentation

[Rob Herring]

On Tue, Aug 17, 2021 at 06:52:15PM +0200, Johan Jonker wrote:
> Hi Peter,
> 
> Some comments. Have a look if it's useful.
> 
> On 8/12/21 10:41 PM, Peter Geis wrote:
> > The rk3568 usb2phy node is a standalone node with a single muxed
> > interrupt.
> > Add documentation for it to phy-rockchip-inno-usb2.
> > 
> > Signed-off-by: Peter Geis <pgwipeout at gmail.com>
> > ---
> >  .../bindings/phy/phy-rockchip-inno-usb2.yaml  | 31 ++++++++++++++++---
> >  1 file changed, 27 insertions(+), 4 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml
> > index 5bebd86bf8b6..d2a749c3f9a3 100644
> > --- a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml
> > +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml
> > @@ -18,6 +18,7 @@ properties:
> >        - rockchip,rk3328-usb2phy
> >        - rockchip,rk3366-usb2phy
> >        - rockchip,rk3399-usb2phy
> > +      - rockchip,rk3568-usb2phy
> >        - rockchip,rv1108-usb2phy
> >  
> >    reg:
> > @@ -50,6 +51,9 @@ properties:
> >      description:
> >        Phandle to the extcon device providing the cable state for the otg phy.
> >  
> 
> > +  interrupts:
> > +    description: Muxed interrupt for both ports
> > +
> 
> This allows every Rockchip SoC dtsi to add an interrupt here.
> You have only restricted the requirements.
> The goal is to restrict things and filter bogus properties.
> If it was done because it doesn't compile, maybe could you try/test/use
> something like the rockchip-io-domain.yaml $defs format.

Don't use $defs unless there's more than 1 copy needed of something. If 
it happens to bypass some checks, it's only a matter of time til I fix 
that.

This may be better solved with another schema file rather than a long 
if/then schema. It's a judgement call.

> 
> ===
> 
> unevaluatedProperties: false
> 
> allOf:
>   - $ref: "#/$defs/rk3568"
> 
> $defs:
>   rk3568:
>     if:
>       properties:
>         compatible:
>           contains:
>             const: rockchip,rk3568-usb2phy
> 
>     then:
>       properties:
>         interrupts:
>           maxItems: 1
> 
>       required:
>         - interrupts
> 
>     else:
>       properties:
>         host-port:
>           properties:
>             interrupts:
>               description: host linestate interrupt
> 
>             interrupt-names:
>               const: linestate
> 
>           required:
>             - interrupts
>             - interrupt-names
> 
>         otg-port:
>           properties:
> 
>            interrupts:
>              minItems: 1
>              maxItems: 3
> 
>            interrupt-names:
>              oneOf:
>                - const: linestate
>                - const: otg-mux
>                - items:
>                    - const: otg-bvalid
>                    - const: otg-id
>                    - const: linestate
> 
>           required:
>             - interrupts
>             - interrupt-names
> 
> >    rockchip,usbgrf:
> >      $ref: /schemas/types.yaml#/definitions/phandle
> >      description:
> > @@ -78,8 +82,6 @@ properties:
> >  
> >      required:
> >        - "#phy-cells"
> 
> > -      - interrupts
> > -      - interrupt-names
> 
> Also remove them as properties in this part when a separate $defs is used.
> 
> >  
> >    otg-port:
> >      type: object
> > @@ -109,8 +111,6 @@ properties:
> >  
> >      required:
> >        - "#phy-cells"
> 
> > -      - interrupts
> > -      - interrupt-names
> 
> dito
> 
> >  
> >  required:
> >    - compatible
> > @@ -120,6 +120,29 @@ required:
> >    - host-port
> >    - otg-port
> >  
> > +allOf:
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            const: rockchip,rk3568-usb2phy
> 
> > +      then:
> 
> Test "if then else" alignment with yamllint

yamllint is not going to help there. What's needed is a meta-schema that 
adds the dependencies.

> 
> > +        properties:
> > +          interrupts:
> > +            maxItems: 1
> > +        required:
> > +          - interrupts
> 
> > +      else:
> 
> alignment
> 
> > +        properties:
> > +          host-port:
> > +            required:
> > +              - interrupts
> > +              - interrupt-names
> > +          otg-port:
> > +            required:
> > +              - interrupts
> > +              - interrupt-names
> > +
> 
> >  additionalProperties: false
> 
> additionalProperties does workn't with allOf: - $ref. Use
> unevaluatedProperties.
> 
> >  
> >  examples:
> > 
>