[PATCH v2 2/2] phy: qcom-qmp: Add support for SM6115 UFS phy
Vinod Koul
vkoul at kernel.org
Mon Aug 16 22:34:57 PDT 2021
On 13-08-21, 23:11, Iskren Chernev wrote:
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
> index 6592b58b13f6..fde1bff16e27 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp.h
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
> @@ -280,6 +280,8 @@
> #define QSERDES_V3_COM_SSC_PER2 0x020
> #define QSERDES_V3_COM_SSC_STEP_SIZE1 0x024
> #define QSERDES_V3_COM_SSC_STEP_SIZE2 0x028
> +#define QSERDES_V3_COM_POST_DIV 0x02c
> +#define QSERDES_V3_COM_POST_DIV_MUX 0x030
> #define QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN 0x034
> # define QSERDES_V3_COM_BIAS_EN 0x0001
> # define QSERDES_V3_COM_BIAS_EN_MUX 0x0002
> @@ -291,6 +293,7 @@
> #define QSERDES_V3_COM_CLK_ENABLE1 0x038
> #define QSERDES_V3_COM_SYS_CLK_CTRL 0x03c
> #define QSERDES_V3_COM_SYSCLK_BUF_ENABLE 0x040
> +#define QSERDES_V3_COM_PLL_EN 0x044
> #define QSERDES_V3_COM_PLL_IVCO 0x048
> #define QSERDES_V3_COM_LOCK_CMP1_MODE0 0x098
> #define QSERDES_V3_COM_LOCK_CMP2_MODE0 0x09c
> @@ -348,6 +351,100 @@
> #define QSERDES_V3_COM_DEBUG_BUS_SEL 0x178
> #define QSERDES_V3_COM_CMN_MODE 0x184
>
> +/* Only for QMP V3 660 PHY - QSERDES COM registers*/
> +#define QSERDES_V3_660_COM_LOCK_CMP1_MODE0 0x04c
> +#define QSERDES_V3_660_COM_LOCK_CMP2_MODE0 0x050
> +#define QSERDES_V3_660_COM_LOCK_CMP3_MODE0 0x054
> +#define QSERDES_V3_660_COM_LOCK_CMP1_MODE1 0x058
> +#define QSERDES_V3_660_COM_LOCK_CMP2_MODE1 0x05c
> +#define QSERDES_V3_660_COM_LOCK_CMP3_MODE1 0x060
> +#define QSERDES_V3_660_COM_CMD_RSVD0 0x064
Are you sure this is v3, this looks like V2 offsets:
#define QSERDES_COM_LOCK_CMP1_MODE0 0x04c
#define QSERDES_COM_LOCK_CMP2_MODE0 0x050
#define QSERDES_COM_LOCK_CMP3_MODE0 0x054
#define QSERDES_COM_LOCK_CMP1_MODE1 0x058
#define QSERDES_COM_LOCK_CMP2_MODE1 0x05c
#define QSERDES_COM_LOCK_CMP3_MODE1 0x060
> +#define QSERDES_V3_660_COM_EP_CLOCK_DETECT_CTRL 0x068
> +#define QSERDES_V3_660_COM_SYSCLK_DET_COMP_STATUS 0x06c
This is new
> +#define QSERDES_V3_660_COM_BG_TRIM 0x070
> +#define QSERDES_V3_660_COM_CLK_EP_DIV 0x074
> +#define QSERDES_V3_660_COM_CP_CTRL_MODE0 0x078
Same as v2
So can you run these offsets against v2 and recheck... there is some
confusion always with version numbers with this IP!
> +#define QSERDES_V3_660_COM_CP_CTRL_MODE1 0x07c
> +#define QSERDES_V3_660_COM_CMN_RSVD1 0x080
> +#define QSERDES_V3_660_COM_PLL_RCTRL_MODE0 0x084
> +#define QSERDES_V3_660_COM_PLL_RCTRL_MODE1 0x088
> +#define QSERDES_V3_660_COM_CMN_RSVD2 0x08c
> +#define QSERDES_V3_660_COM_PLL_CCTRL_MODE0 0x090
> +#define QSERDES_V3_660_COM_PLL_CCTRL_MODE1 0x094
> +#define QSERDES_V3_660_COM_CMN_RSVD3 0x098
> +#define QSERDES_V3_660_COM_PLL_CNTRL 0x09c
> +#define QSERDES_V3_660_COM_PHASE_SEL_CTRL 0x0a0
> +#define QSERDES_V3_660_COM_PHASE_SEL_DC 0x0a4
> +#define QSERDES_V3_660_COM_BIAS_EN_CTRL_BY_PSM 0x0a8
> +#define QSERDES_V3_660_COM_SYSCLK_EN_SEL 0x0ac
> +#define QSERDES_V3_660_COM_CML_SYSCLK_SEL 0x0b0
> +#define QSERDES_V3_660_COM_RESETSM_CNTRL 0x0b4
> +#define QSERDES_V3_660_COM_RESETSM_CNTRL2 0x0b8
> +#define QSERDES_V3_660_COM_RESTRIM_CTRL 0x0bc
> +#define QSERDES_V3_660_COM_RESTRIM_CTRL2 0x0c0
> +#define QSERDES_V3_660_COM_LOCK_CMP_EN 0x0c8
> +#define QSERDES_V3_660_COM_LOCK_CMP_CFG 0x0cc
> +#define QSERDES_V3_660_COM_DEC_START_MODE0 0x0d0
> +#define QSERDES_V3_660_COM_DEC_START_MODE1 0x0d4
> +#define QSERDES_V3_660_COM_VCOCAL_DEADMAN_CTRL 0x0d8
> +#define QSERDES_V3_660_COM_DIV_FRAC_START1_MODE0 0x0dc
> +#define QSERDES_V3_660_COM_DIV_FRAC_START2_MODE0 0x0e0
> +#define QSERDES_V3_660_COM_DIV_FRAC_START3_MODE0 0x0e4
> +#define QSERDES_V3_660_COM_DIV_FRAC_START1_MODE1 0x0e8
> +#define QSERDES_V3_660_COM_DIV_FRAC_START2_MODE1 0x0ec
> +#define QSERDES_V3_660_COM_DIV_FRAC_START3_MODE1 0x0f0
> +#define QSERDES_V3_660_COM_VCO_TUNE_MINVAL1 0x0f4
> +#define QSERDES_V3_660_COM_VCO_TUNE_MINVAL2 0x0f8
> +#define QSERDES_V3_660_COM_CMN_RSVD4 0x0fc
> +#define QSERDES_V3_660_COM_INTEGLOOP_INITVAL 0x100
> +#define QSERDES_V3_660_COM_INTEGLOOP_EN 0x104
> +#define QSERDES_V3_660_COM_INTEGLOOP_GAIN0_MODE0 0x108
> +#define QSERDES_V3_660_COM_INTEGLOOP_GAIN1_MODE0 0x10c
> +#define QSERDES_V3_660_COM_INTEGLOOP_GAIN0_MODE1 0x110
> +#define QSERDES_V3_660_COM_INTEGLOOP_GAIN1_MODE1 0x114
> +#define QSERDES_V3_660_COM_VCO_TUNE_MAXVAL1 0x118
> +#define QSERDES_V3_660_COM_VCO_TUNE_MAXVAL2 0x11c
> +#define QSERDES_V3_660_COM_RES_TRIM_CONTROL2 0x120
> +#define QSERDES_V3_660_COM_VCO_TUNE_CTRL 0x124
> +#define QSERDES_V3_660_COM_VCO_TUNE_MAP 0x128
> +#define QSERDES_V3_660_COM_VCO_TUNE1_MODE0 0x12c
> +#define QSERDES_V3_660_COM_VCO_TUNE2_MODE0 0x130
> +#define QSERDES_V3_660_COM_VCO_TUNE1_MODE1 0x134
> +#define QSERDES_V3_660_COM_VCO_TUNE2_MODE1 0x138
> +#define QSERDES_V3_660_COM_VCO_TUNE_INITVAL1 0x13c
> +#define QSERDES_V3_660_COM_VCO_TUNE_INITVAL2 0x140
> +#define QSERDES_V3_660_COM_VCO_TUNE_TIMER1 0x144
> +#define QSERDES_V3_660_COM_VCO_TUNE_TIMER2 0x148
> +#define QSERDES_V3_660_COM_SAR 0x14c
> +#define QSERDES_V3_660_COM_SAR_CLK 0x150
> +#define QSERDES_V3_660_COM_SAR_CODE_OUT_STATUS 0x154
> +#define QSERDES_V3_660_COM_SAR_CODE_READY_STATUS 0x158
> +#define QSERDES_V3_660_COM_CMN_STATUS 0x15c
> +#define QSERDES_V3_660_COM_RESET_SM_STATUS 0x160
> +#define QSERDES_V3_660_COM_RESTRIM_CODE_STATUS 0x164
> +#define QSERDES_V3_660_COM_PLLCAL_CODE1_STATUS 0x168
> +#define QSERDES_V3_660_COM_PLLCAL_CODE2_STATUS 0x16c
> +#define QSERDES_V3_660_COM_BG_CTRL 0x170
> +#define QSERDES_V3_660_COM_CLK_SELECT 0x174
> +#define QSERDES_V3_660_COM_HSCLK_SEL 0x178
> +#define QSERDES_V3_660_COM_INTEGLOOP_BINCODE_STATUS 0x17c
> +#define QSERDES_V3_660_COM_PLL_ANALOG 0x180
> +#define QSERDES_V3_660_COM_CORECLK_DIV 0x184
> +#define QSERDES_V3_660_COM_SW_RESET 0x188
> +#define QSERDES_V3_660_COM_CORE_CLK_EN 0x18c
> +#define QSERDES_V3_660_COM_C_READY_STATUS 0x190
> +#define QSERDES_V3_660_COM_CMN_CONFIG 0x194
> +#define QSERDES_V3_660_COM_CMN_RATE_OVERRIDE 0x198
> +#define QSERDES_V3_660_COM_SVS_MODE_CLK_SEL 0x19c
> +#define QSERDES_V3_660_COM_DEBUG_BUS0 0x1a0
> +#define QSERDES_V3_660_COM_DEBUG_BUS1 0x1a4
> +#define QSERDES_V3_660_COM_DEBUG_BUS2 0x1a8
> +#define QSERDES_V3_660_COM_DEBUG_BUS3 0x1ac
> +#define QSERDES_V3_660_COM_DEBUG_BUS_SEL 0x1b0
> +#define QSERDES_V3_660_COM_CMN_MISC1 0x1b4
> +#define QSERDES_V3_660_COM_CORECLK_DIV_MODE1 0x1bc
> +#define QSERDES_V3_660_COM_CMN_RSVD5 0x1c0
> +
> /* Only for QMP V3 PHY - TX registers */
> #define QSERDES_V3_TX_BIST_MODE_LANENO 0x000
> #define QSERDES_V3_TX_CLKBUF_ENABLE 0x008
> @@ -380,6 +477,10 @@
> #define QSERDES_V3_TX_TX_INTERFACE_MODE 0x0c4
> #define QSERDES_V3_TX_VMODE_CTRL1 0x0f0
>
> +/* Only for QMP V3 660 PHY - TX registers */
> +#define QSERDES_V3_660_TX_HIGHZ_TRANSCEIVER_BIAS_DRVR_EN 0x068
> +#define QSERDES_V3_660_TX_LANE_MODE 0x094
> +
> /* Only for QMP V3 PHY - RX registers */
> #define QSERDES_V3_RX_UCDR_FO_GAIN 0x008
> #define QSERDES_V3_RX_UCDR_SO_GAIN_HALF 0x00c
> @@ -411,6 +512,24 @@
> #define QSERDES_V3_RX_RX_MODE_00 0x164
> #define QSERDES_V3_RX_RX_MODE_01 0x168
>
> +/* Only for QMP V3 660 PHY - RX registers */
> +#define QSERDES_V3_660_RX_UCDR_SVS_SO_GAIN_HALF 0x030
> +#define QSERDES_V3_660_RX_UCDR_SVS_SO_GAIN_QUARTER 0x034
> +#define QSERDES_V3_660_RX_UCDR_SVS_SO_GAIN_EIGHTH 0x038
> +#define QSERDES_V3_660_RX_UCDR_SVS_SO_GAIN 0x03c
> +#define QSERDES_V3_660_RX_UCDR_FASTLOCK_FO_GAIN 0x040
> +#define QSERDES_V3_660_RX_UCDR_SO_SATURATION_ENABLE 0x048
> +#define QSERDES_V3_660_RX_RX_TERM_BW 0x090
> +#define QSERDES_V3_660_RX_RX_EQ_GAIN1_LSB 0x0c4
> +#define QSERDES_V3_660_RX_RX_EQ_GAIN1_MSB 0x0c8
> +#define QSERDES_V3_660_RX_RX_EQ_GAIN2_LSB 0x0cc
> +#define QSERDES_V3_660_RX_RX_EQ_GAIN2_MSB 0x0d0
> +#define QSERDES_V3_660_RX_RX_EQU_ADAPTOR_CNTRL2 0x0d8
> +#define QSERDES_V3_660_RX_SIGDET_CNTRL 0x114
> +#define QSERDES_V3_660_RX_SIGDET_LVL 0x118
> +#define QSERDES_V3_660_RX_SIGDET_DEGLITCH_CNTRL 0x11c
> +#define QSERDES_V3_660_RX_RX_INTERFACE_MODE 0x12c
> +
> /* Only for QMP V3 PHY - PCS registers */
> #define QPHY_V3_PCS_POWER_DOWN_CONTROL 0x004
> #define QPHY_V3_PCS_TXMGN_V0 0x00c
> @@ -473,6 +592,21 @@
> #define QPHY_V3_PCS_REFGEN_REQ_CONFIG1 0x20c
> #define QPHY_V3_PCS_REFGEN_REQ_CONFIG2 0x210
>
> +/* Only for QMP V3 660 PHY - PCS registers */
> +#define QPHY_V3_660_PCS_PHY_START 0x000
> +#define QPHY_V3_660_PCS_POWER_DOWN_CONTROL 0x004
> +#define QPHY_V3_660_PCS_TX_LARGE_AMP_DRV_LVL 0x034
> +#define QPHY_V3_660_PCS_TX_LARGE_AMP_POST_EMP_LVL 0x038
> +#define QPHY_V3_660_PCS_TX_SMALL_AMP_DRV_LVL 0x03c
> +#define QPHY_V3_660_PCS_TX_SMALL_AMP_POST_EMP_LVL 0x040
> +#define QPHY_V3_660_PCS_RX_MIN_STALL_NOCONFIG_TIME_CAP 0x0cc
> +#define QPHY_V3_660_PCS_LINECFG_DISABLE 0x138
> +#define QPHY_V3_660_PCS_RX_SYM_RESYNC_CTRL 0x13c
> +#define QPHY_V3_660_PCS_RX_MIN_HIBERN8_TIME 0x140
> +#define QPHY_V3_660_PCS_RX_SIGDET_CTRL2 0x148
> +#define QPHY_V3_660_PCS_RX_PWM_GEAR_BAND 0x154
> +#define QPHY_V3_660_PCS_PCS_READY_STATUS 0x168
> +
> /* Only for QMP V3 PHY - PCS_MISC registers */
> #define QPHY_V3_PCS_MISC_CLAMP_ENABLE 0x0c
> #define QPHY_V3_PCS_MISC_OSC_DTCT_CONFIG2 0x2c
> --
> 2.32.0
--
~Vinod
More information about the linux-phy
mailing list