[PATCH v2 1/9] dt-bindings: phy: mediatek: tphy: support type switch by pericfg

[Chunfeng Yun]

Add support type switch by pericfg register between USB3, PCIe,
SATA, SGMII, this is used to replace the way through efuse or
jumper.

Reviewed-by: Rob Herring <robh at kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
---
v2: add reviewed-by Rob
---
 .../devicetree/bindings/phy/mediatek,tphy.yaml   | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
index 838852cb8527..9e6c0f43f1c6 100644
--- a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
+++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
@@ -201,6 +201,22 @@ patternProperties:
           Specify the flag to enable BC1.2 if support it
         type: boolean
 
+      mediatek,syscon-type:
+        $ref: /schemas/types.yaml#/definitions/phandle-array
+        maxItems: 1
+        description:
+          A phandle to syscon used to access the register of type switch,
+          the field should always be 3 cells long.
+        items:
+          items:
+            - description:
+                The first cell represents a phandle to syscon
+            - description:
+                The second cell represents the register offset
+            - description:
+                The third cell represents the index of config segment
+              enum: [0, 1, 2, 3]
+
     required:
       - reg
       - "#phy-cells"
-- 
2.25.1