[PATCH 12/16] dt-bindings: media: Add DT bindings for TI CSI2RX driver

[Pratyush Yadav]

On 01/04/21 10:52AM, Rob Herring wrote:
> On Tue, Mar 30, 2021 at 11:03:44PM +0530, Pratyush Yadav wrote:
> > TI's J721E uses the Cadence CSI2RX and DPHY peripherals to facilitate
> > capture over a CSI-2 bus. The TI CSI2RX platform driver glues all the
> > parts together.
> > 
> > Signed-off-by: Pratyush Yadav <p.yadav at ti.com>
> > ---
> >  .../devicetree/bindings/media/ti,csi2rx.yaml  | 70 +++++++++++++++++++
> >  1 file changed, 70 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/media/ti,csi2rx.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/media/ti,csi2rx.yaml b/Documentation/devicetree/bindings/media/ti,csi2rx.yaml
> > new file mode 100644
> > index 000000000000..ebd894364391
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/ti,csi2rx.yaml
> > @@ -0,0 +1,70 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/ti,csi2rx.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: TI CSI2RX Wrapper Device Tree Bindings
> > +
> > +maintainers:
> > +  - Pratyush Yadav <p.yadav at ti.com>
> > +
> > +properties:
> > +  compatible:
> > +    items:
> > +      - const: ti,csi2rx
> > +
> > +  dmas:
> > +    description: RX DMA Channel 0
> 
> items:
>   - description: RX DMA Channel 0
> 
> Or just 'maxItems: 1'

Ok.

> 
> > +
> > +  dma-names:
> > +    items:
> > +      - const: rx0
> > +
> > +  reg:
> > +    maxItems: 1
> > +    description: Base address and size of the TI wrapper registers.
> 
> That's all 'reg' properties, drop 'description'.

Ok.

> 
> > +
> > +  power-domains:
> > +    maxItems: 1
> > +    description:
> > +      PM domain provider node and an args specifier containing
> > +      the device id value.
> 
> Drop.

Ok.

> 
> > +
> > +  ranges: true
> > +
> > +  "#address-cells":
> > +    const: 2
> > +
> > +  "#size-cells":
> > +    const: 2
> > +
> > +patternProperties:
> > +  "csi-bridge@":
> 
> "^csi-bridge@"

Ok.

> 
> > +    type: object
> > +    description: CSI2 bridge node.
> 
> Just an empty node?

No. It should be a node for the Cadence csi2rx IP (compatible 
"cdns,csi2rx"). I'm not sure how to model this. This subnode is needed 
but it should take its properties from the Cadence csi2rx schema. Will a 

  properties:
    allOf:
      - $ref: cdns,csi2rx.yaml#

be a good idea?

> 
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - dmas
> > +  - dma-names
> > +  - power-domains
> > +  - "#address-cells"
> > +  - "#size-cells"
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/soc/ti,sci_pm_domain.h>
> > +
> > +    ti_csi2rx0: ticsi2rx {
> > +        compatible = "ti,csi2rx";
> > +        dmas = <&main_udmap 0x4940>;
> > +        dma-names = "rx0";
> > +        reg = <0x0 0x4500000 0x0 0x1000>;
> > +        power-domains = <&k3_pds 26 TI_SCI_PD_EXCLUSIVE>;
> > +        #address-cells = <2>;
> > +        #size-cells = <2>;
> > +    };
> > -- 
> > 2.30.0
> > 

-- 
Regards,
Pratyush Yadav
Texas Instruments Inc.