Linux version 2.6.18-6-686 (Debian 2.6.18.dfsg.1-24etch2) (dannf@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Tue May 5 00:40:20 UTC 2009
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
 BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003f6fc000 (usable)
 BIOS-e820: 000000003f6fc000 - 000000003f700000 (ACPI NVS)
 BIOS-e820: 00000000fdf00000 - 00000000fe000000 (reserved)
 BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved)
 BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
 BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
 BIOS-e820: 00000001fd700000 - 00000001fdf00000 (reserved)
118MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 259836
  DMA zone: 4096 pages, LIFO batch:0
  Normal zone: 225280 pages, LIFO batch:31
  HighMem zone: 30460 pages, LIFO batch:7
DMI present.
ACPI: Unable to locate RSDP
Allocating PCI resources starting at 40000000 (gap: 3f700000:be800000)
Detected 1399.895 MHz processor.
Built 1 zonelists.  Total pages: 259836
Kernel command line: ro root=LABEL=etch rhgb quiet pci=assign-busses
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (017fc000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1022220k/1039344k available (1543k kernel code, 16392k reserved, 578k data, 196k init, 121840k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 2801.61 BogoMIPS (lpj=5603238)
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000
CPU: After vendor identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9f9bf 00000000 00000000 00000040 00000180 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
CPU0: Intel(R) Pentium(R) M processor 1.40GHz stepping 06
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
migration_cost=0
checking if image is initramfs... it is
Freeing initrd memory: 4780k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd9c4, last bus=5
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f6a50
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xa92a, dseg 0x400
PnPBIOS: 21 nodes reported by PnP BIOS; 21 recorded by driver
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:02.0
* The chipset may have PM-Timer Bug. Due to workarounds for a bug,
* this clock source is slow. If you are sure your timer does not have
* this bug, please use "acpi_pm_good" to disable the workaround
PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Firmware left 0000:01:08.0 e100 interrupts enabled, disabling
PCI: Transparent bridge - 0000:00:1e.0
PCI: Using IRQ router PIIX/ICH [8086/24c0] at 0000:00:1f.0
PCI: setting IRQ 9 as level-triggered
PCI: Found IRQ 9 for device 0000:00:1f.1
PCI: Sharing IRQ 9 with 0000:00:1d.2
pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0a: ioport range 0x1000-0x105f has been reserved
pnp: 00:0a: ioport range 0x1060-0x107f has been reserved
pnp: 00:0a: ioport range 0x1180-0x11bf has been reserved
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bus 3, cardbus bridge: 0000:02:0f.0
  IO window: 00003000-000030ff
  IO window: 00003400-000034ff
  PREFETCH window: 40000000-41ffffff
  MEM window: e2000000-e3ffffff
PCI: Bus 7, cardbus bridge: 0000:02:0f.1
  IO window: 00003800-000038ff
  IO window: 00003c00-00003cff
  PREFETCH window: 42000000-43ffffff
  MEM window: e4000000-e5ffffff
PCI: Bridge: 0000:01:04.0
  IO window: 3000-4fff
  MEM window: e0300000-e5ffffff
  PREFETCH window: 40000000-43ffffff
PCI: Bridge: 0000:00:1e.0
  IO window: 2000-4fff
  MEM window: e0200000-e5ffffff
  PREFETCH window: 40000000-43ffffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1247833162.900:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
00:11: ttyS2 at I/O 0x3e8 (irq = 10) is a 16550A
00:13: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:14: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI No-Shortcut mode
Freeing unused kernel memory: 196k freed
Time: tsc clocksource has been installed.
input: AT Translated Set 2 keyboard as /class/input/input0
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v3.0
PCI: setting IRQ 5 as level-triggered
PCI: Found IRQ 5 for device 0000:00:1d.0
PCI: Sharing IRQ 5 with 0000:00:02.0
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 5, io base 0x00001820
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PCI: setting IRQ 11 as level-triggered
PCI: Found IRQ 11 for device 0000:00:1d.1
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001840
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
Intel(R) PRO/1000 Network Driver - version 7.1.9-k4-NAPI
Copyright (c) 1999-2006 Intel Corporation.
e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
PCI: Found IRQ 9 for device 0000:00:1d.2
PCI: Sharing IRQ 9 with 0000:00:1f.1
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 9, io base 0x00001860
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PCI: Found IRQ 11 for device 0000:00:1d.7
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 11, io mem 0xe0100000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
PCI: Found IRQ 9 for device 0000:00:1f.1
PCI: Sharing IRQ 9 with 0000:00:1d.2
ICH4: chipset revision 2
ICH4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0x1818-0x181f, BIOS settings: hdc:pio, hdd:DMA
Probing IDE interface ide0...
Probing IDE interface ide1...
hdc: STI Flash 7.2.0, CFA DISK drive
hdd: HEJ423030F9AT00, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
e1000: 0000:01:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:c0:88:00:04:ba
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
e100: eth1: e100_probe: addr 0xe0220000, irq 9, MAC addr 00:C0:88:00:04:BB
hdc: max request size: 128KiB
hdc: 4001760 sectors (2048 MB), CHS=3970/16/63
hdc: cache flushes not supported
 hdc:
hdd: max request size: 128KiB
hdd: 58605120 sectors (30005 MB) w/8192KiB Cache, CHS=58140/16/63, UDMA(100)
hdd: cache flushes supported
 hdd: hdd1 hdd2 hdd3 hdd4 < hdd5 hdd6 hdd7 >
Attempting manual resume
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 855 Chipset.
agpgart: Detected 8060K stolen memory.
agpgart: AGP aperture is 128M @ 0xe8000000
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: PC Speaker as /class/input/input1
intel_rng: FWH not detected
Real Time Clock Driver v1.12ac
PCI: Found IRQ 9 for device 0000:00:1f.3
FDC 0 is a post-1991 82077
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
Yenta: CardBus bridge found at 0000:02:0f.0 [e4bf:2000]
Yenta: Disabling CLKRUN feature
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:0f.0, mfunc 0x0fc01d02, devctl 0x66
Yenta: ISA IRQ mask 0x0000, PCI irq 11
Socket status: 30000010
pcmcia: parent PCI bridge I/O window: 0x3000 - 0x4fff
cs: IO port probe 0x3000-0x4fff: clean.
pcmcia: parent PCI bridge Memory window: 0xe0300000 - 0xe5ffffff
pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff
Yenta: CardBus bridge found at 0000:02:0f.1 [e4bf:2000]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:0f.1, mfunc 0x0fc01d02, devctl 0x66
Yenta: ISA IRQ mask 0x0000, PCI irq 11
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x3000 - 0x4fff
cs: IO port probe 0x3000-0x4fff: clean.
pcmcia: parent PCI bridge Memory window: 0xe0300000 - 0xe5ffffff
pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff
input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
ts: Compaq touchscreen protocol output
pccard: PCMCIA card inserted into slot 0
cs: memory probe 0xe0300000-0xe5ffffff: excluding 0xe0300000-0xe08cffff 0xe0ea0000-0xe146ffff 0xe1a40000-0xe5ffffff
pcmcia: registering new device pcmcia0.0
cs: IO port probe 0x100-0x3af: excluding 0x1f0-0x1f7 0x290-0x297
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x3af: excluding 0x1f0-0x1f7 0x290-0x297
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
pcmcia: request for exclusive IRQ could not be fulfilled.
pcmcia: the driver needs updating to supported shared IRQ lines.
ft1000: eth2: addr 0x3100 irq 11, MAC addr 00:07:35:80:00:01
Adding 1052248k swap on /dev/hdd2.  Priority:-1 extents:1 across:1052248k
EXT3 FS on hdd7, internal journal
loop: loaded (max 8 devices)
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hdd1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hdd6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hdd5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hdd3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
pcmcia: Detected deprecated PCMCIA ioctl usage from process: discover.
pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
e100: eth1: e100_watchdog: link up, 100Mbps, full-duplex
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
