[PATCH 05/33] gpio: add generic single-register fixed-direction GPIO driver
Russell King - ARM Linux
linux at armlinux.org.uk
Fri Sep 2 10:00:57 PDT 2016
Linus,
There's a change I'd like to merge into patch 5 - overall it looks
like the below, and allows us to use gpio-reg with the PXA mainstone
MST_PCMCIA[01] registers. Some of these GPIO signals have hardware
interrupts associated with them, but not all.
Do you approve?
Thanks.
8<====
From: Russell King <rmk+kernel at armlinux.org.uk>
Subject: [PATCH] gpio: gpio-reg: add irq mapping for gpio-reg users
Add support for mapping gpio-reg gpios to interrupts. This may be a
non-linear mapping - some gpios in the register may not even have
corresponding interrupts associated with them, so we need to pass an
array.
Signed-off-by: Russell King <rmk+kernel at armlinux.org.uk>
---
arch/arm/mach-pxa/lubbock.c | 2 +-
arch/arm/mach-sa1100/assabet.c | 2 +-
arch/arm/mach-sa1100/neponset.c | 2 +-
drivers/gpio/gpio-reg.c | 25 +++++++++++++++++++++++--
include/linux/gpio/gpio-reg.h | 3 ++-
5 files changed, 28 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 1f7bfabfa4eb..cd401546cea8 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -477,7 +477,7 @@ static void __init lubbock_init(void)
lubbock_misc_wr_gc = gpio_reg_init(NULL, (void *)&LUB_MISC_WR,
-1, 16, "lubbock", 0, LUB_MISC_WR,
- NULL);
+ NULL, NULL, NULL);
if (IS_ERR(lubbock_misc_wr_gc)) {
pr_err("Lubbock: unable to register lubbock GPIOs: %ld\n",
PTR_ERR(lubbock_misc_wr_gc));
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 51950454afac..e086c609551c 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -120,7 +120,7 @@ static int __init assabet_init_gpio(void __iomem *reg, u32 def_val)
writel_relaxed(def_val, reg);
gc = gpio_reg_init(NULL, reg, -1, 32, "assabet", 0xff000000, def_val,
- assabet_names);
+ assabet_names, NULL, NULL);
if (IS_ERR(gc))
return PTR_ERR(gc);
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index 5abc04fb196d..b16de1f0d5d0 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -240,7 +240,7 @@ static int neponset_init_gpio(struct gpio_chip **gcp,
struct gpio_chip *gc;
gc = gpio_reg_init(dev, reg, -1, num, label, in ? 0xffffffff : 0,
- readl_relaxed(reg), names);
+ readl_relaxed(reg), names, NULL, NULL);
if (IS_ERR(gc))
return PTR_ERR(gc);
diff --git a/drivers/gpio/gpio-reg.c b/drivers/gpio/gpio-reg.c
index 561e28b4d3aa..39175d373871 100644
--- a/drivers/gpio/gpio-reg.c
+++ b/drivers/gpio/gpio-reg.c
@@ -19,6 +19,8 @@ struct gpio_reg {
u32 direction;
u32 out;
void __iomem *reg;
+ struct irq_domain *irqdomain;
+ const int *irqs;
};
#define to_gpio_reg(x) container_of(x, struct gpio_reg, gc)
@@ -96,6 +98,17 @@ static void gpio_reg_set_multiple(struct gpio_chip *gc, unsigned long *mask,
spin_unlock_irqrestore(&r->lock, flags);
}
+static int gpio_reg_to_irq(struct gpio_chip *gc, unsigned offset)
+{
+ struct gpio_reg *r = to_gpio_reg(gc);
+ int irq = r->irqs[offset];
+
+ if (irq >= 0 && r->irqdomain)
+ irq = irq_find_mapping(r->irqdomain, irq);
+
+ return irq;
+}
+
/**
* gpio_reg_init - add a fixed in/out register as gpio
* @dev: optional struct device associated with this register
@@ -104,7 +117,12 @@ static void gpio_reg_set_multiple(struct gpio_chip *gc, unsigned long *mask,
* @label: GPIO chip label
* @direction: bitmask of fixed direction, one per GPIO signal, 1 = in
* @def_out: initial GPIO output value
- * @names: array of %num strings describing each GPIO signal
+ * @names: array of %num strings describing each GPIO signal or %NULL
+ * @irqdom: irq domain or %NULL
+ * @irqs: array of %num ints describing the interrupt mapping for each
+ * GPIO signal, or %NULL. If @irqdom is %NULL, then this
+ * describes the Linux interrupt number, otherwise it describes
+ * the hardware interrupt number in the specified irq domain.
*
* Add a single-register GPIO device containing up to 32 GPIO signals,
* where each GPIO has a fixed input or output configuration. Only
@@ -114,7 +132,7 @@ static void gpio_reg_set_multiple(struct gpio_chip *gc, unsigned long *mask,
*/
struct gpio_chip *gpio_reg_init(struct device *dev, void __iomem *reg,
int base, int num, const char *label, u32 direction, u32 def_out,
- const char *const *names)
+ const char *const *names, struct irq_domain *irqdom, const int *irqs)
{
struct gpio_reg *r;
int ret;
@@ -136,12 +154,15 @@ struct gpio_chip *gpio_reg_init(struct device *dev, void __iomem *reg,
r->gc.set = gpio_reg_set;
r->gc.get = gpio_reg_get;
r->gc.set_multiple = gpio_reg_set_multiple;
+ if (irqs)
+ r->gc.to_irq = gpio_reg_to_irq;
r->gc.base = base;
r->gc.ngpio = num;
r->gc.names = names;
r->direction = direction;
r->out = def_out;
r->reg = reg;
+ r->irqs = irqs;
if (dev)
ret = devm_gpiochip_add_data(dev, &r->gc, r);
diff --git a/include/linux/gpio/gpio-reg.h b/include/linux/gpio/gpio-reg.h
index 0352bec7319a..90e0b9060e6d 100644
--- a/include/linux/gpio/gpio-reg.h
+++ b/include/linux/gpio/gpio-reg.h
@@ -2,10 +2,11 @@
#define GPIO_REG_H
struct device;
+struct irq_domain;
struct gpio_chip *gpio_reg_init(struct device *dev, void __iomem *reg,
int base, int num, const char *label, u32 direction, u32 def_out,
- const char *const *names);
+ const char *const *names, struct irq_domain *irqdom, const int *irqs);
int gpio_reg_resume(struct gpio_chip *gc);
--
2.1.0
--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.
More information about the linux-pcmcia
mailing list