[PATCH 13/33] pcmcia: soc_common: restore previous socket state on error

[Russell King]

If an attempt to set a socket state returns an error, restore the
previous socket state.  If restoring the previous socket state
fails, warn about this.

This allows us to have simple error handling in the socket state
configuration handlers - there is no need for every handler
implementation to manually undo the updates, which can be complex
when regulators are involved.

Signed-off-by: Russell King <rmk+kernel at armlinux.org.uk>
---
 drivers/pcmcia/soc_common.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c
index 822de207c408..d8508c41d7da 100644
--- a/drivers/pcmcia/soc_common.c
+++ b/drivers/pcmcia/soc_common.c
@@ -292,6 +292,14 @@ static int soc_common_pcmcia_config_skt(
 	int ret;
 
 	ret = skt->ops->configure_socket(skt, state);
+	if (ret < 0) {
+		pr_err("soc_common_pcmcia: unable to configure socket %d\n",
+		       skt->nr);
+		/* restore the previous state */
+		WARN_ON(skt->ops->configure_socket(skt, &skt->cs_state));
+		return ret;
+	}
+
 	if (ret == 0) {
 		struct gpio_desc *descs[2];
 		int values[2], n = 0;
@@ -324,10 +332,6 @@ static int soc_common_pcmcia_config_skt(
 		skt->cs_state = *state;
 	}
 
-	if (ret < 0)
-		printk(KERN_ERR "soc_common_pcmcia: unable to configure "
-		       "socket %d\n", skt->nr);
-
 	return ret;
 }
 
@@ -776,6 +780,8 @@ int soc_pcmcia_add_one(struct soc_pcmcia_socket *skt)
 {
 	int ret;
 
+	skt->cs_state = dead_socket;
+
 	setup_timer(&skt->poll_timer, soc_common_pcmcia_poll_event,
 		    (unsigned long)skt);
 	skt->poll_timer.expires = jiffies + SOC_PCMCIA_POLL_PERIOD;
-- 
2.1.0