[PATCH 30/33] ARM: sa1100/jornada720: switch jornada720 PCMCIA to gpiod APIs
Russell King
rmk+kernel at armlinux.org.uk
Mon Aug 29 03:26:39 PDT 2016
Convert the low level PCMCIA driver to gpiod APIs for controlling
the socket power.
Signed-off-by: Russell King <rmk+kernel at armlinux.org.uk>
---
arch/arm/mach-sa1100/jornada720.c | 12 ++++++
drivers/pcmcia/sa1111_jornada720.c | 81 +++++++++++++++++++++++++-------------
2 files changed, 66 insertions(+), 27 deletions(-)
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index 0a2ca9be00e6..6298bad09ef3 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -190,6 +190,17 @@ static struct platform_device s1d13xxxfb_device = {
.resource = s1d13xxxfb_resources,
};
+static struct gpiod_lookup_table jornada_pcmcia_gpiod_table = {
+ .dev_id = "1800",
+ .table = {
+ GPIO_LOOKUP("sa1111", 0, "s0-power", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("sa1111", 1, "s1-power", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("sa1111", 2, "s0-3v", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("sa1111", 3, "s1-3v", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
static struct resource sa1111_resources[] = {
[0] = DEFINE_RES_MEM(SA1111REGSTART, SA1111REGLEN),
[1] = DEFINE_RES_IRQ(IRQ_GPIO1),
@@ -265,6 +276,7 @@ static int __init jornada720_init(void)
udelay(20); /* give it some time to restart */
gpiod_add_lookup_table(&jornada_ts_gpiod_table);
+ gpiod_add_lookup_table(&jornada_pcmcia_gpiod_table);
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
}
diff --git a/drivers/pcmcia/sa1111_jornada720.c b/drivers/pcmcia/sa1111_jornada720.c
index c2c30580c83f..bfcb9fd43352 100644
--- a/drivers/pcmcia/sa1111_jornada720.c
+++ b/drivers/pcmcia/sa1111_jornada720.c
@@ -5,29 +5,64 @@
*
*/
#include <linux/module.h>
-#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/errno.h>
+#include <linux/gpio/consumer.h>
#include <linux/init.h>
#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/hardware/sa1111.h>
#include <asm/mach-types.h>
#include "sa1111_generic.h"
-/* Does SOCKET1_3V actually do anything? */
-#define SOCKET0_POWER GPIO_GPIO0
-#define SOCKET0_3V GPIO_GPIO2
-#define SOCKET1_POWER (GPIO_GPIO1 | GPIO_GPIO3)
-#define SOCKET1_3V GPIO_GPIO3
+/*
+ * Socket 0 power: GPIO A0
+ * Socket 0 3V: GPIO A2
+ * Socket 1 power: GPIO A1 & GPIO A3
+ * Socket 1 3V: GPIO A3
+ * Does Socket 1 3V actually do anything?
+ */
+enum {
+ J720_GPIO_PWR,
+ J720_GPIO_3V,
+ J720_GPIO_MAX,
+};
+struct jornada720_data {
+ struct gpio_desc *gpio[J720_GPIO_MAX];
+};
+
+static int jornada720_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+ struct sa1111_pcmcia_socket *s = to_skt(skt);
+ struct device *dev = skt->socket.dev.parent;
+ struct jornada720_data *j;
+
+ j = devm_kzalloc(dev, sizeof(*j), GFP_KERNEL);
+ if (!j)
+ return -ENOMEM;
+
+ j->gpio[J720_GPIO_PWR] = devm_gpiod_get(dev, skt->nr ? "s1-power" :
+ "s0-power", GPIOD_OUT_LOW);
+ if (IS_ERR(j->gpio[J720_GPIO_PWR]))
+ return PTR_ERR(j->gpio[J720_GPIO_PWR]);
+
+ j->gpio[J720_GPIO_3V] = devm_gpiod_get(dev, skt->nr ? "s1-3v" :
+ "s0-3v", GPIOD_OUT_LOW);
+ if (IS_ERR(j->gpio[J720_GPIO_3V]))
+ return PTR_ERR(j->gpio[J720_GPIO_3V]);
+
+ s->driver_data = j;
+
+ return 0;
+}
static int
jornada720_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state)
{
struct sa1111_pcmcia_socket *s = to_skt(skt);
- unsigned int pa_dwr_mask, pa_dwr_set;
+ struct jornada720_data *j = s->driver_data;
+ int values[J720_GPIO_MAX];
int ret;
printk(KERN_INFO "%s(): config socket %d vcc %d vpp %d\n", __func__,
@@ -35,35 +70,32 @@ jornada720_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_s
switch (skt->nr) {
case 0:
- pa_dwr_mask = SOCKET0_POWER | SOCKET0_3V;
-
switch (state->Vcc) {
default:
case 0:
- pa_dwr_set = 0;
+ values[J720_GPIO_PWR] = 0;
+ values[J720_GPIO_3V] = 0;
break;
case 33:
- pa_dwr_set = SOCKET0_POWER | SOCKET0_3V;
+ values[J720_GPIO_3V] = 1;
break;
case 50:
- pa_dwr_set = SOCKET0_POWER;
+ values[J720_GPIO_PWR] = 1;
break;
}
break;
case 1:
- pa_dwr_mask = SOCKET1_POWER;
-
switch (state->Vcc) {
default:
case 0:
- pa_dwr_set = 0;
+ values[J720_GPIO_PWR] = 0;
+ values[J720_GPIO_3V] = 0;
break;
case 33:
- pa_dwr_set = SOCKET1_POWER;
- break;
case 50:
- pa_dwr_set = SOCKET1_POWER;
+ values[J720_GPIO_PWR] = 1;
+ values[J720_GPIO_3V] = 1;
break;
}
break;
@@ -80,13 +112,14 @@ jornada720_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_s
ret = sa1111_pcmcia_configure_socket(skt, state);
if (ret == 0)
- sa1111_set_io(s->dev, pa_dwr_mask, pa_dwr_set);
+ gpiod_set_array_value(J720_GPIO_MAX, j->gpio, values);
return ret;
}
static struct pcmcia_low_level jornada720_pcmcia_ops = {
.owner = THIS_MODULE,
+ .hw_init = jornada720_pcmcia_hw_init,
.configure_socket = jornada720_pcmcia_configure_socket,
.first = 0,
.nr = 2,
@@ -97,15 +130,9 @@ int pcmcia_jornada720_init(struct sa1111_dev *sadev)
int ret = -ENODEV;
if (machine_is_jornada720()) {
- unsigned int pin = GPIO_A0 | GPIO_A1 | GPIO_A2 | GPIO_A3;
-
+ /* Fixme: why messing around with SA11x0's GPIO1? */
GRER |= 0x00000002;
- /* Set GPIO_A<3:1> to be outputs for PCMCIA/CF power controller: */
- sa1111_set_io_dir(sadev, pin, 0, 0);
- sa1111_set_io(sadev, pin, 0);
- sa1111_set_sleep_io(sadev, pin, 0);
-
sa11xx_drv_pcmcia_ops(&jornada720_pcmcia_ops);
ret = sa1111_pcmcia_add(sadev, &jornada720_pcmcia_ops,
sa11xx_drv_pcmcia_add_one);
--
2.1.0
More information about the linux-pcmcia
mailing list