[PATCH 02/10] arm: at91: move platfarm_data to include/linux/platform_data/atmel.h
Joachim Eastwood
manabian at gmail.com
Sat Nov 10 05:54:27 EST 2012
Hi Jean-Christophe,
On 7 November 2012 12:22, Jean-Christophe PLAGNIOL-VILLARD
<plagnioj at jcrosoft.com> wrote:
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
> Cc: Nicolas Ferre <nicolas.ferre at atmel.com>
> Cc: linux-ide at vger.kernel.org
> Cc: linux-input at vger.kernel.org
> Cc: linux-mmc at vger.kernel.org
> Cc: linux-can at vger.kernel.org
> Cc: netdev at vger.kernel.org
> Cc: linux-pcmcia at lists.infradead.org
> Cc: rtc-linux at googlegroups.com
> Cc: spi-devel-general at lists.sourceforge.net
> Cc: linux-serial at vger.kernel.org
> Cc: linux-usb at vger.kernel.org
> Cc: linux-fbdev at vger.kernel.org
> ---
> HI all,
>
> If it's ok with everyone this will go via at91
> with the patch serie than clean up the include/mach
>
> For preparation to switch to arm multiarch kernel
>
> Best Regards,
> J.
> arch/arm/mach-at91/include/mach/board.h | 55 ----------------------
> arch/avr32/mach-at32ap/include/mach/board.h | 7 ---
> drivers/ata/pata_at91.c | 2 +-
> drivers/input/touchscreen/atmel_tsadcc.c | 2 +-
> drivers/mmc/host/atmel-mci.c | 2 +-
> drivers/net/can/at91_can.c | 3 +-
> drivers/net/ethernet/cadence/at91_ether.c | 2 +-
> drivers/pcmcia/at91_cf.c | 2 +-
> drivers/rtc/rtc-at91sam9.c | 2 +-
> drivers/spi/spi-atmel.c | 2 +-
> drivers/tty/serial/atmel_serial.c | 2 +-
> drivers/usb/gadget/at91_udc.c | 2 +-
> drivers/usb/gadget/atmel_usba_udc.c | 2 +-
> drivers/usb/host/ohci-at91.c | 2 +-
> drivers/video/atmel_lcdfb.c | 2 +-
> include/linux/platform_data/atmel.h | 67 +++++++++++++++++++++++++++
> 16 files changed, 80 insertions(+), 76 deletions(-)
<snip>
> diff --git a/drivers/net/ethernet/cadence/at91_ether.c b/drivers/net/ethernet/cadence/at91_ether.c
> index 4e980a7..35fc6edb 100644
> --- a/drivers/net/ethernet/cadence/at91_ether.c
> +++ b/drivers/net/ethernet/cadence/at91_ether.c
> @@ -31,6 +31,7 @@
> #include <linux/clk.h>
> #include <linux/gfp.h>
> #include <linux/phy.h>
> +#include <linux/platform_data/atmel.h>
>
> #include <asm/io.h>
> #include <asm/uaccess.h>
> @@ -38,7 +39,6 @@
>
> #include <mach/at91rm9200_emac.h>
> #include <asm/gpio.h>
> -#include <mach/board.h>
>
> #include "at91_ether.h"
The at91_ether driver in net-next does not need to be change since it
all mach includes has already been removed by other patches and it
includes linux/platform_data/macb.h directly.
What tree was these patches based on?
The at91_ether driver changes has been in linux-next for a long while now.
regards
Joachim Eastwood
More information about the linux-pcmcia
mailing list