[PATCH 08/19] PCMCIA: sa11x0: nanoengine: convert to use new irq/gpio management
Russell King - ARM Linux
linux at arm.linux.org.uk
Fri Jan 20 05:19:52 EST 2012
Convert Nanoengine socket driver to use the new irq/gpio management.
This is slightly more involved because we have to touch the private
platform header file to modify the GPIO bitmasks to be GPIO numbers.
Signed-off-by: Russell King <rmk+kernel at arm.linux.org.uk>
---
arch/arm/mach-sa1100/include/mach/nanoengine.h | 8 +-
drivers/pcmcia/sa1100_nanoengine.c | 101 +++---------------------
2 files changed, 15 insertions(+), 94 deletions(-)
diff --git a/arch/arm/mach-sa1100/include/mach/nanoengine.h b/arch/arm/mach-sa1100/include/mach/nanoengine.h
index 14f8382..ad24c6c 100644
--- a/arch/arm/mach-sa1100/include/mach/nanoengine.h
+++ b/arch/arm/mach-sa1100/include/mach/nanoengine.h
@@ -16,10 +16,10 @@
#include <mach/irqs.h>
-#define GPIO_PC_READY0 GPIO_GPIO(11) /* ready for socket 0 (active high)*/
-#define GPIO_PC_READY1 GPIO_GPIO(12) /* ready for socket 1 (active high) */
-#define GPIO_PC_CD0 GPIO_GPIO(13) /* detect for socket 0 (active low) */
-#define GPIO_PC_CD1 GPIO_GPIO(14) /* detect for socket 1 (active low) */
+#define GPIO_PC_READY0 11 /* ready for socket 0 (active high)*/
+#define GPIO_PC_READY1 12 /* ready for socket 1 (active high) */
+#define GPIO_PC_CD0 13 /* detect for socket 0 (active low) */
+#define GPIO_PC_CD1 14 /* detect for socket 1 (active low) */
#define GPIO_PC_RESET0 GPIO_GPIO(15) /* reset socket 0 */
#define GPIO_PC_RESET1 GPIO_GPIO(16) /* reset socket 1 */
diff --git a/drivers/pcmcia/sa1100_nanoengine.c b/drivers/pcmcia/sa1100_nanoengine.c
index 93b9c9b..b19b816 100644
--- a/drivers/pcmcia/sa1100_nanoengine.c
+++ b/drivers/pcmcia/sa1100_nanoengine.c
@@ -34,43 +34,24 @@
#include "sa1100_generic.h"
-static struct pcmcia_irqs irqs_skt0[] = {
- /* socket, IRQ, name */
- { 0, NANOENGINE_IRQ_GPIO_PC_CD0, "PC CD0" },
-};
-
-static struct pcmcia_irqs irqs_skt1[] = {
- /* socket, IRQ, name */
- { 1, NANOENGINE_IRQ_GPIO_PC_CD1, "PC CD1" },
-};
-
struct nanoengine_pins {
- unsigned input_pins;
unsigned output_pins;
unsigned clear_outputs;
- unsigned transition_pins;
- unsigned pci_irq;
- struct pcmcia_irqs *pcmcia_irqs;
- unsigned pcmcia_irqs_size;
+ int gpio_cd;
+ int gpio_rdy;
};
static struct nanoengine_pins nano_skts[] = {
{
- .input_pins = GPIO_PC_READY0 | GPIO_PC_CD0,
.output_pins = GPIO_PC_RESET0,
.clear_outputs = GPIO_PC_RESET0,
- .transition_pins = NANOENGINE_IRQ_GPIO_PC_CD0,
- .pci_irq = NANOENGINE_IRQ_GPIO_PC_READY0,
- .pcmcia_irqs = irqs_skt0,
- .pcmcia_irqs_size = ARRAY_SIZE(irqs_skt0)
+ .gpio_cd = GPIO_PC_CD0,
+ .gpio_rdy = GPIO_PC_READY0,
}, {
- .input_pins = GPIO_PC_READY1 | GPIO_PC_CD1,
.output_pins = GPIO_PC_RESET1,
.clear_outputs = GPIO_PC_RESET1,
- .transition_pins = NANOENGINE_IRQ_GPIO_PC_CD1,
- .pci_irq = NANOENGINE_IRQ_GPIO_PC_READY1,
- .pcmcia_irqs = irqs_skt1,
- .pcmcia_irqs_size = ARRAY_SIZE(irqs_skt1)
+ .gpio_cd = GPIO_PC_CD1,
+ .gpio_rdy = GPIO_PC_READY1,
}
};
@@ -83,28 +64,15 @@ static int nanoengine_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
if (i >= num_nano_pcmcia_sockets)
return -ENXIO;
- GPDR &= ~nano_skts[i].input_pins;
GPDR |= nano_skts[i].output_pins;
GPCR = nano_skts[i].clear_outputs;
- irq_set_irq_type(nano_skts[i].transition_pins, IRQ_TYPE_EDGE_BOTH);
- skt->socket.pci_irq = nano_skts[i].pci_irq;
- return soc_pcmcia_request_irqs(skt,
- nano_skts[i].pcmcia_irqs, nano_skts[i].pcmcia_irqs_size);
-}
+ skt->stat[SOC_STAT_CD].gpio = nano_skts[i].gpio_cd;
+ skt->stat[SOC_STAT_CD].name = i ? "PC CD1" : "PC CD0";
+ skt->stat[SOC_STAT_RDY].gpio = nano_skts[i].gpio_rdy;
+ skt->stat[SOC_STAT_RDY].name = i ? "PC RDY1" : "PC RDY0";
-/*
- * Release all resources.
- */
-static void nanoengine_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
-{
- unsigned i = skt->nr;
-
- if (i >= num_nano_pcmcia_sockets)
- return;
-
- soc_pcmcia_free_irqs(skt,
- nano_skts[i].pcmcia_irqs, nano_skts[i].pcmcia_irqs_size);
+ return 0;
}
static int nanoengine_pcmcia_configure_socket(
@@ -138,25 +106,11 @@ static int nanoengine_pcmcia_configure_socket(
static void nanoengine_pcmcia_socket_state(
struct soc_pcmcia_socket *skt, struct pcmcia_state *state)
{
- unsigned long levels = GPLR;
unsigned i = skt->nr;
if (i >= num_nano_pcmcia_sockets)
return;
- memset(state, 0, sizeof(struct pcmcia_state));
- switch (i) {
- case 0:
- state->ready = (levels & GPIO_PC_READY0) ? 1 : 0;
- state->detect = !(levels & GPIO_PC_CD0) ? 1 : 0;
- break;
- case 1:
- state->ready = (levels & GPIO_PC_READY1) ? 1 : 0;
- state->detect = !(levels & GPIO_PC_CD1) ? 1 : 0;
- break;
- default:
- return;
- }
state->bvd1 = 1;
state->bvd2 = 1;
state->wrprot = 0; /* Not available */
@@ -164,46 +118,13 @@ static void nanoengine_pcmcia_socket_state(
state->vs_Xv = 0;
}
-/*
- * Enable card status IRQs on (re-)initialisation. This can
- * be called at initialisation, power management event, or
- * pcmcia event.
- */
-static void nanoengine_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
-{
- unsigned i = skt->nr;
-
- if (i >= num_nano_pcmcia_sockets)
- return;
-
- soc_pcmcia_enable_irqs(skt,
- nano_skts[i].pcmcia_irqs, nano_skts[i].pcmcia_irqs_size);
-}
-
-/*
- * Disable card status IRQs on suspend.
- */
-static void nanoengine_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
-{
- unsigned i = skt->nr;
-
- if (i >= num_nano_pcmcia_sockets)
- return;
-
- soc_pcmcia_disable_irqs(skt,
- nano_skts[i].pcmcia_irqs, nano_skts[i].pcmcia_irqs_size);
-}
-
static struct pcmcia_low_level nanoengine_pcmcia_ops = {
.owner = THIS_MODULE,
.hw_init = nanoengine_pcmcia_hw_init,
- .hw_shutdown = nanoengine_pcmcia_hw_shutdown,
.configure_socket = nanoengine_pcmcia_configure_socket,
.socket_state = nanoengine_pcmcia_socket_state,
- .socket_init = nanoengine_pcmcia_socket_init,
- .socket_suspend = nanoengine_pcmcia_socket_suspend,
};
int pcmcia_nanoengine_init(struct device *dev)
--
1.7.4.4
More information about the linux-pcmcia
mailing list