D-Link NIC on Ricoh Cardbus

[Ortwin Glück]

Hi,

I have a D-Link DGE-660TD Ethernet Card. Strangely lspcmcia doesn't list 
its manufacturer and card ID. It looks like it only "sees" the Cardbus 
controller. Is that a bug?

lspcmcia -v
Socket 0 Bridge:        [yenta_cardbus]         (bus ID: 0000:46:06.4)
         Configuration:  state: on       ready: yes
                         Voltage: 3.3V Vcc: 3.3V Vpp: 3.3V
Socket 0 Device 0:      [-- no driver --]       (bus ID: 0.0)
         Configuration:  state: on
         Product Name:   RICOH Bay8Controller
         Identification: manf_id: 0x0000 card_id: 0x0000
                         function: 254 ((null))
                         prod_id(1): "RICOH" (0xd9f522ed)
                         prod_id(2): "Bay8Controller" (0xb8dd2c87)
                         prod_id(3): --- (---)
                         prod_id(4): --- (---)


lspci:
46:06.4 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev bb)
         Subsystem: Hewlett-Packard Company Device 1521
         Flags: bus master, medium devsel, latency 168, IRQ 22
         Memory at d3100000 (32-bit, non-prefetchable) [size=4K]
         Bus: primary=46, secondary=47, subordinate=4a, sec-latency=176
         Memory window 0: d8000000-dbfff000 (prefetchable)
         Memory window 1: dc000000-dffff000
         I/O window 0: 00002000-000020ff
         I/O window 1: 00002400-000024ff
         16-bit legacy interface ports at 0001
         Kernel driver in use: yenta_cardbus

Thanks,

Ortwin