From manuel.lauss at googlemail.com  Wed Nov  2 07:53:44 2011
From: manuel.lauss at googlemail.com (Manuel Lauss)
Date: Wed,  2 Nov 2011 12:53:44 +0100
Subject: [PATCH RESEND 01/18] MIPS: Alchemy: remove PB1000 support
In-Reply-To: <1320174224-27305-2-git-send-email-manuel.lauss@googlemail.com>
References: <1320174224-27305-2-git-send-email-manuel.lauss@googlemail.com>
Message-ID: <1320234824-28604-1-git-send-email-manuel.lauss@googlemail.com>

Noone seems to have test hardware or care anymore.  Drop PB1000 support
and along with it the old Alchemy PCMCIA socket driver.

Cc: netdev at vger.kernel.org
Cc: linux-pcmcia at lists.infradead.org
Signed-off-by: Manuel Lauss <manuel.lauss at googlemail.com>
---
Resend with CC's added as requested by Ralf.
Cc'ing netdev for IrDA driver parts and pcmcia for the socket driver
removal.

 arch/mips/alchemy/Kconfig                        |    9 -
 arch/mips/alchemy/Platform                       |    7 -
 arch/mips/alchemy/common/irq.c                   |   11 -
 arch/mips/alchemy/devboards/Makefile             |    1 -
 arch/mips/alchemy/devboards/pb1000/Makefile      |    8 -
 arch/mips/alchemy/devboards/pb1000/board_setup.c |  209 ---------
 arch/mips/alchemy/devboards/prom.c               |    2 +-
 arch/mips/include/asm/mach-pb1x00/pb1000.h       |   87 ----
 drivers/net/irda/au1k_ir.c                       |    5 +-
 drivers/pcmcia/Kconfig                           |    4 -
 drivers/pcmcia/Makefile                          |    4 -
 drivers/pcmcia/au1000_generic.c                  |  545 ----------------------
 drivers/pcmcia/au1000_generic.h                  |  135 ------
 drivers/pcmcia/au1000_pb1x00.c                   |  294 ------------
 14 files changed, 2 insertions(+), 1319 deletions(-)
 delete mode 100644 arch/mips/alchemy/devboards/pb1000/Makefile
 delete mode 100644 arch/mips/alchemy/devboards/pb1000/board_setup.c
 delete mode 100644 arch/mips/include/asm/mach-pb1x00/pb1000.h
 delete mode 100644 drivers/pcmcia/au1000_generic.c
 delete mode 100644 drivers/pcmcia/au1000_generic.h
 delete mode 100644 drivers/pcmcia/au1000_pb1x00.c

diff --git a/arch/mips/alchemy/Kconfig b/arch/mips/alchemy/Kconfig
index 2a68be6..5a48387 100644
--- a/arch/mips/alchemy/Kconfig
+++ b/arch/mips/alchemy/Kconfig
@@ -78,15 +78,6 @@ config MIPS_MIRAGE
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
 
-config MIPS_PB1000
-	bool "Alchemy PB1000 board"
-	select ALCHEMY_GPIOINT_AU1000
-	select DMA_NONCOHERENT
-	select HW_HAS_PCI
-	select SWAP_IO_SPACE
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_HAS_EARLY_PRINTK
-
 config MIPS_PB1100
 	bool "Alchemy PB1100 board"
 	select ALCHEMY_GPIOINT_AU1000
diff --git a/arch/mips/alchemy/Platform b/arch/mips/alchemy/Platform
index 96e9e41..4e07967 100644
--- a/arch/mips/alchemy/Platform
+++ b/arch/mips/alchemy/Platform
@@ -5,13 +5,6 @@ platform-$(CONFIG_MIPS_ALCHEMY)	+= alchemy/common/
 
 
 #
-# AMD Alchemy Pb1000 eval board
-#
-platform-$(CONFIG_MIPS_PB1000)	+= alchemy/devboards/
-cflags-$(CONFIG_MIPS_PB1000)	+= -I$(srctree)/arch/mips/include/asm/mach-pb1x00
-load-$(CONFIG_MIPS_PB1000)	+= 0xffffffff80100000
-
-#
 # AMD Alchemy Pb1100 eval board
 #
 platform-$(CONFIG_MIPS_PB1100)	+= alchemy/devboards/
diff --git a/arch/mips/alchemy/common/irq.c b/arch/mips/alchemy/common/irq.c
index 8b60ba0..2a94a64 100644
--- a/arch/mips/alchemy/common/irq.c
+++ b/arch/mips/alchemy/common/irq.c
@@ -35,9 +35,6 @@
 #include <asm/irq_cpu.h>
 #include <asm/mipsregs.h>
 #include <asm/mach-au1x00/au1000.h>
-#ifdef CONFIG_MIPS_PB1000
-#include <asm/mach-pb1x00/pb1000.h>
-#endif
 
 /* Interrupt Controller register offsets */
 #define IC_CFG0RD	0x40
@@ -265,14 +262,6 @@ static void au1x_ic1_unmask(struct irq_data *d)
 
 	__raw_writel(1 << bit, base + IC_MASKSET);
 	__raw_writel(1 << bit, base + IC_WAKESET);
-
-/* very hacky. does the pb1000 cpld auto-disable this int?
- * nowhere in the current kernel sources is it disabled.	--mlau
- */
-#if defined(CONFIG_MIPS_PB1000)
-	if (d->irq == AU1000_GPIO15_INT)
-		__raw_writel(0x4000, (void __iomem *)PB1000_MDR); /* enable int */
-#endif
 	wmb();
 }
 
diff --git a/arch/mips/alchemy/devboards/Makefile b/arch/mips/alchemy/devboards/Makefile
index 826449c..bea80d7 100644
--- a/arch/mips/alchemy/devboards/Makefile
+++ b/arch/mips/alchemy/devboards/Makefile
@@ -4,7 +4,6 @@
 
 obj-y += prom.o bcsr.o platform.o
 obj-$(CONFIG_PM)		+= pm.o
-obj-$(CONFIG_MIPS_PB1000)	+= pb1000/
 obj-$(CONFIG_MIPS_PB1100)	+= pb1100/
 obj-$(CONFIG_MIPS_PB1200)	+= pb1200/
 obj-$(CONFIG_MIPS_PB1500)	+= pb1500/
diff --git a/arch/mips/alchemy/devboards/pb1000/Makefile b/arch/mips/alchemy/devboards/pb1000/Makefile
deleted file mode 100644
index 97c6615..0000000
--- a/arch/mips/alchemy/devboards/pb1000/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-#  Copyright 2000, 2008 MontaVista Software Inc.
-#  Author: MontaVista Software, Inc. <source at mvista.com>
-#
-# Makefile for the Alchemy Semiconductor Pb1000 board.
-#
-
-obj-y := board_setup.o
diff --git a/arch/mips/alchemy/devboards/pb1000/board_setup.c b/arch/mips/alchemy/devboards/pb1000/board_setup.c
deleted file mode 100644
index e64fdcb..0000000
--- a/arch/mips/alchemy/devboards/pb1000/board_setup.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- * Copyright 2000, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source at mvista.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/pm.h>
-#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-pb1x00/pb1000.h>
-#include <asm/reboot.h>
-#include <prom.h>
-
-#include "../platform.h"
-
-const char *get_system_type(void)
-{
-	return "Alchemy Pb1000";
-}
-
-static void board_reset(char *c)
-{
-	asm volatile ("jr %0" : : "r" (0xbfc00000));
-}
-
-static void board_power_off(void)
-{
-	while (1)
-		asm volatile (
-		"	.set	mips32					\n"
-		"	wait						\n"
-		"	.set	mips0					\n");
-}
-
-void __init board_setup(void)
-{
-	u32 pin_func, static_cfg0;
-	u32 sys_freqctrl, sys_clksrc;
-	u32 prid = read_c0_prid();
-
-	sys_freqctrl = 0;
-	sys_clksrc = 0;
-
-	/* Set AUX clock to 12 MHz * 8 = 96 MHz */
-	au_writel(8, SYS_AUXPLL);
-	alchemy_gpio1_input_enable();
-	udelay(100);
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-	/* Zero and disable FREQ2 */
-	sys_freqctrl = au_readl(SYS_FREQCTRL0);
-	sys_freqctrl &= ~0xFFF00000;
-	au_writel(sys_freqctrl, SYS_FREQCTRL0);
-
-	/* Zero and disable USBH/USBD clocks */
-	sys_clksrc = au_readl(SYS_CLKSRC);
-	sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK |
-		        SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK);
-	au_writel(sys_clksrc, SYS_CLKSRC);
-
-	sys_freqctrl = au_readl(SYS_FREQCTRL0);
-	sys_freqctrl &= ~0xFFF00000;
-
-	sys_clksrc = au_readl(SYS_CLKSRC);
-	sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK |
-		        SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK);
-
-	switch (prid & 0x000000FF) {
-	case 0x00: /* DA */
-	case 0x01: /* HA */
-	case 0x02: /* HB */
-		/* CPU core freq to 48 MHz to slow it way down... */
-		au_writel(4, SYS_CPUPLL);
-
-		/*
-		 * Setup 48 MHz FREQ2 from CPUPLL for USB Host
-		 * FRDIV2 = 3 -> div by 8 of 384 MHz -> 48 MHz
-		 */
-		sys_freqctrl |= (3 << SYS_FC_FRDIV2_BIT) | SYS_FC_FE2;
-		au_writel(sys_freqctrl, SYS_FREQCTRL0);
-
-		/* CPU core freq to 384 MHz */
-		au_writel(0x20, SYS_CPUPLL);
-
-		printk(KERN_INFO "Au1000: 48 MHz OHCI workaround enabled\n");
-		break;
-
-	default: /* HC and newer */
-		/* FREQ2 = aux / 2 = 48 MHz */
-		sys_freqctrl |= (0 << SYS_FC_FRDIV2_BIT) |
-				 SYS_FC_FE2 | SYS_FC_FS2;
-		au_writel(sys_freqctrl, SYS_FREQCTRL0);
-		break;
-	}
-
-	/*
-	 * Route 48 MHz FREQ2 into USB Host and/or Device
-	 */
-	sys_clksrc |= SYS_CS_MUX_FQ2 << SYS_CS_MUH_BIT;
-	au_writel(sys_clksrc, SYS_CLKSRC);
-
-	/* Configure pins GPIO[14:9] as GPIO */
-	pin_func = au_readl(SYS_PINFUNC) & ~(SYS_PF_UR3 | SYS_PF_USB);
-
-	/* 2nd USB port is USB host */
-	pin_func |= SYS_PF_USB;
-
-	au_writel(pin_func, SYS_PINFUNC);
-
-	alchemy_gpio_direction_input(11);
-	alchemy_gpio_direction_input(13);
-	alchemy_gpio_direction_output(4, 0);
-	alchemy_gpio_direction_output(5, 0);
-#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
-
-	/* Make GPIO 15 an input (for interrupt line) */
-	pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_IRF;
-	/* We don't need I2S, so make it available for GPIO[31:29] */
-	pin_func |= SYS_PF_I2S;
-	au_writel(pin_func, SYS_PINFUNC);
-
-	alchemy_gpio_direction_input(15);
-
-	static_cfg0 = au_readl(MEM_STCFG0) & ~0xc00;
-	au_writel(static_cfg0, MEM_STCFG0);
-
-	/* configure RCE2* for LCD */
-	au_writel(0x00000004, MEM_STCFG2);
-
-	/* MEM_STTIME2 */
-	au_writel(0x09000000, MEM_STTIME2);
-
-	/* Set 32-bit base address decoding for RCE2* */
-	au_writel(0x10003ff0, MEM_STADDR2);
-
-	/*
-	 * PCI CPLD setup
-	 * Expand CE0 to cover PCI
-	 */
-	au_writel(0x11803e40, MEM_STADDR1);
-
-	/* Burst visibility on */
-	au_writel(au_readl(MEM_STCFG0) | 0x1000, MEM_STCFG0);
-
-	au_writel(0x83, MEM_STCFG1);	     /* ewait enabled, flash timing */
-	au_writel(0x33030a10, MEM_STTIME1);  /* slower timing for FPGA */
-
-	/* Setup the static bus controller */
-	au_writel(0x00000002, MEM_STCFG3);  /* type = PCMCIA */
-	au_writel(0x280E3D07, MEM_STTIME3); /* 250ns cycle time */
-	au_writel(0x10000000, MEM_STADDR3); /* any PCMCIA select */
-
-	/*
-	 * Enable Au1000 BCLK switching - note: sed1356 must not use
-	 * its BCLK (Au1000 LCLK) for any timings
-	 */
-	switch (prid & 0x000000FF) {
-	case 0x00: /* DA */
-	case 0x01: /* HA */
-	case 0x02: /* HB */
-		break;
-	default:  /* HC and newer */
-		/*
-		 * Enable sys bus clock divider when IDLE state or no bus
-		 * activity.
-		 */
-		au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL);
-		break;
-	}
-
-	pm_power_off = board_power_off;
-	_machine_halt = board_power_off;
-	_machine_restart = board_reset;
-}
-
-static int __init pb1000_init_irq(void)
-{
-	irq_set_irq_type(AU1000_GPIO15_INT, IRQF_TRIGGER_LOW);
-	return 0;
-}
-arch_initcall(pb1000_init_irq);
-
-static int __init pb1000_device_init(void)
-{
-	return db1x_register_norflash(8 * 1024 * 1024, 4, 0);
-}
-device_initcall(pb1000_device_init);
diff --git a/arch/mips/alchemy/devboards/prom.c b/arch/mips/alchemy/devboards/prom.c
index e5306b5..56d7ea5 100644
--- a/arch/mips/alchemy/devboards/prom.c
+++ b/arch/mips/alchemy/devboards/prom.c
@@ -33,7 +33,7 @@
 #include <asm/mach-au1x00/au1000.h>
 #include <prom.h>
 
-#if defined(CONFIG_MIPS_PB1000) || defined(CONFIG_MIPS_DB1000) || \
+#if defined(CONFIG_MIPS_DB1000) || \
     defined(CONFIG_MIPS_PB1100) || defined(CONFIG_MIPS_DB1100) || \
     defined(CONFIG_MIPS_PB1500) || defined(CONFIG_MIPS_DB1500) || \
     defined(CONFIG_MIPS_BOSPORUS) || defined(CONFIG_MIPS_MIRAGE)
diff --git a/arch/mips/include/asm/mach-pb1x00/pb1000.h b/arch/mips/include/asm/mach-pb1x00/pb1000.h
deleted file mode 100644
index 6505925..0000000
--- a/arch/mips/include/asm/mach-pb1x00/pb1000.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * Alchemy Semi Pb1000 Reference Board
- *
- * Copyright 2001, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source at mvista.com>
- *
- * ########################################################################
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- *
- */
-#ifndef __ASM_PB1000_H
-#define __ASM_PB1000_H
-
-/* PCMCIA PB1000 specific defines */
-#define PCMCIA_MAX_SOCK  1
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
-
-#define PB1000_PCR		0xBE000000
-#  define PCR_SLOT_0_VPP0	(1 << 0)
-#  define PCR_SLOT_0_VPP1	(1 << 1)
-#  define PCR_SLOT_0_VCC0	(1 << 2)
-#  define PCR_SLOT_0_VCC1	(1 << 3)
-#  define PCR_SLOT_0_RST	(1 << 4)
-#  define PCR_SLOT_1_VPP0	(1 << 8)
-#  define PCR_SLOT_1_VPP1	(1 << 9)
-#  define PCR_SLOT_1_VCC0	(1 << 10)
-#  define PCR_SLOT_1_VCC1	(1 << 11)
-#  define PCR_SLOT_1_RST	(1 << 12)
-
-#define PB1000_MDR		0xBE000004
-#  define MDR_PI		(1 << 5)	/* PCMCIA int latch  */
-#  define MDR_EPI		(1 << 14)	/* enable PCMCIA int */
-#  define MDR_CPI		(1 << 15)	/* clear  PCMCIA int  */
-
-#define PB1000_ACR1		0xBE000008
-#  define ACR1_SLOT_0_CD1	(1 << 0)	/* card detect 1	*/
-#  define ACR1_SLOT_0_CD2	(1 << 1)	/* card detect 2	*/
-#  define ACR1_SLOT_0_READY	(1 << 2)	/* ready		*/
-#  define ACR1_SLOT_0_STATUS	(1 << 3)	/* status change	*/
-#  define ACR1_SLOT_0_VS1	(1 << 4)	/* voltage sense 1	*/
-#  define ACR1_SLOT_0_VS2	(1 << 5)	/* voltage sense 2	*/
-#  define ACR1_SLOT_0_INPACK	(1 << 6)	/* inpack pin status	*/
-#  define ACR1_SLOT_1_CD1	(1 << 8)	/* card detect 1	*/
-#  define ACR1_SLOT_1_CD2	(1 << 9)	/* card detect 2	*/
-#  define ACR1_SLOT_1_READY	(1 << 10)	/* ready		*/
-#  define ACR1_SLOT_1_STATUS	(1 << 11)	/* status change	*/
-#  define ACR1_SLOT_1_VS1	(1 << 12)	/* voltage sense 1	*/
-#  define ACR1_SLOT_1_VS2	(1 << 13)	/* voltage sense 2	*/
-#  define ACR1_SLOT_1_INPACK	(1 << 14)	/* inpack pin status	*/
-
-#define CPLD_AUX0		0xBE00000C
-#define CPLD_AUX1		0xBE000010
-#define CPLD_AUX2		0xBE000014
-
-/* Voltage levels */
-
-/* VPPEN1 - VPPEN0 */
-#define VPP_GND ((0 << 1) | (0 << 0))
-#define VPP_5V	((1 << 1) | (0 << 0))
-#define VPP_3V	((0 << 1) | (1 << 0))
-#define VPP_12V ((0 << 1) | (1 << 0))
-#define VPP_HIZ ((1 << 1) | (1 << 0))
-
-/* VCCEN1 - VCCEN0 */
-#define VCC_3V	((0 << 1) | (1 << 0))
-#define VCC_5V	((1 << 1) | (0 << 0))
-#define VCC_HIZ ((0 << 1) | (0 << 0))
-
-/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP, SLOT) \
-	((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
-#endif /* __ASM_PB1000_H */
diff --git a/drivers/net/irda/au1k_ir.c b/drivers/net/irda/au1k_ir.c
index a3d696a..d1a77ef 100644
--- a/drivers/net/irda/au1k_ir.c
+++ b/drivers/net/irda/au1k_ir.c
@@ -32,10 +32,7 @@
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/au1000.h>
-#if defined(CONFIG_MIPS_PB1000) || defined(CONFIG_MIPS_PB1100)
-#include <asm/pb1000.h>
-#elif defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100)
-#include <asm/db1x00.h>
+#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100)
 #include <asm/mach-db1x00/bcsr.h>
 #else 
 #error au1k_ir: unsupported board
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index 6e318ce..c022b5c 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -155,10 +155,6 @@ config PCMCIA_M8XX
 
 	  This driver is also available as a module called m8xx_pcmcia.
 
-config PCMCIA_AU1X00
-	tristate "Au1x00 pcmcia support"
-	depends on MIPS_ALCHEMY && PCMCIA
-
 config PCMCIA_ALCHEMY_DEVBOARD
 	tristate "Alchemy Db/Pb1xxx PCMCIA socket services"
 	depends on MIPS_ALCHEMY && PCMCIA
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index 29935ea..ec543a4 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -29,7 +29,6 @@ obj-$(CONFIG_PCMCIA_SA1100)			+= sa11xx_base.o sa1100_cs.o
 obj-$(CONFIG_PCMCIA_SA1111)			+= sa11xx_base.o sa1111_cs.o
 obj-$(CONFIG_M32R_PCC)				+= m32r_pcc.o
 obj-$(CONFIG_M32R_CFC)				+= m32r_cfc.o
-obj-$(CONFIG_PCMCIA_AU1X00)			+= au1x00_ss.o
 obj-$(CONFIG_PCMCIA_BCM63XX)			+= bcm63xx_pcmcia.o
 obj-$(CONFIG_PCMCIA_VRC4171)			+= vrc4171_card.o
 obj-$(CONFIG_PCMCIA_VRC4173)			+= vrc4173_cardu.o
@@ -39,9 +38,6 @@ obj-$(CONFIG_AT91_CF)				+= at91_cf.o
 obj-$(CONFIG_ELECTRA_CF)			+= electra_cf.o
 obj-$(CONFIG_PCMCIA_ALCHEMY_DEVBOARD)		+= db1xxx_ss.o
 
-au1x00_ss-y					+= au1000_generic.o
-au1x00_ss-$(CONFIG_MIPS_PB1000)			+= au1000_pb1x00.o
-
 sa1111_cs-y					+= sa1111_generic.o
 sa1111_cs-$(CONFIG_ASSABET_NEPONSET)		+= sa1100_neponset.o
 sa1111_cs-$(CONFIG_SA1100_BADGE4)		+= sa1100_badge4.o
diff --git a/drivers/pcmcia/au1000_generic.c b/drivers/pcmcia/au1000_generic.c
deleted file mode 100644
index 95dd7c6..0000000
--- a/drivers/pcmcia/au1000_generic.c
+++ /dev/null
@@ -1,545 +0,0 @@
-/*
- *
- * Alchemy Semi Au1000 pcmcia driver
- *
- * Copyright 2001-2003 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *         	ppopov at embeddedalley.com or source at mvista.com
- *
- * Copyright 2004 Pete Popov, Embedded Alley Solutions, Inc.
- * Updated the driver to 2.6. Followed the sa11xx API and largely
- * copied many of the hardware independent functions.
- *
- * ########################################################################
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- * 
- */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/cpufreq.h>
-#include <linux/ioport.h>
-#include <linux/kernel.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/notifier.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <linux/mutex.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-
-#include <asm/mach-au1x00/au1000.h>
-#include "au1000_generic.h"
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Pete Popov <ppopov at embeddedalley.com>");
-MODULE_DESCRIPTION("Linux PCMCIA Card Services: Au1x00 Socket Controller");
-
-#if 0
-#define debug(x,args...) printk(KERN_DEBUG "%s: " x, __func__ , ##args)
-#else
-#define debug(x,args...)
-#endif
-
-#define MAP_SIZE 0x100000
-extern struct au1000_pcmcia_socket au1000_pcmcia_socket[];
-#define PCMCIA_SOCKET(x)	(au1000_pcmcia_socket + (x))
-#define to_au1000_socket(x)	container_of(x, struct au1000_pcmcia_socket, socket)
-
-/* Some boards like to support CF cards as IDE root devices, so they
- * grab pcmcia sockets directly.
- */
-u32 *pcmcia_base_vaddrs[2];
-extern const unsigned long mips_io_port_base;
-
-static DEFINE_MUTEX(pcmcia_sockets_lock);
-
-static int (*au1x00_pcmcia_hw_init[])(struct device *dev) = {
-	au1x_board_init,
-};
-
-static int
-au1x00_pcmcia_skt_state(struct au1000_pcmcia_socket *skt)
-{
-	struct pcmcia_state state;
-	unsigned int stat;
-
-	memset(&state, 0, sizeof(struct pcmcia_state));
-
-	skt->ops->socket_state(skt, &state);
-
-	stat = state.detect  ? SS_DETECT : 0;
-	stat |= state.ready  ? SS_READY  : 0;
-	stat |= state.wrprot ? SS_WRPROT : 0;
-	stat |= state.vs_3v  ? SS_3VCARD : 0;
-	stat |= state.vs_Xv  ? SS_XVCARD : 0;
-	stat |= skt->cs_state.Vcc ? SS_POWERON : 0;
-
-	if (skt->cs_state.flags & SS_IOCARD)
-		stat |= state.bvd1 ? SS_STSCHG : 0;
-	else {
-		if (state.bvd1 == 0)
-			stat |= SS_BATDEAD;
-		else if (state.bvd2 == 0)
-			stat |= SS_BATWARN;
-	}
-	return stat;
-}
-
-/*
- * au100_pcmcia_config_skt
- *
- * Convert PCMCIA socket state to our socket configure structure.
- */
-static int
-au1x00_pcmcia_config_skt(struct au1000_pcmcia_socket *skt, socket_state_t *state)
-{
-	int ret;
-
-	ret = skt->ops->configure_socket(skt, state);
-	if (ret == 0) {
-		skt->cs_state = *state;
-	}
-
-	if (ret < 0)
-		debug("unable to configure socket %d\n", skt->nr);
-
-	return ret;
-}
-
-/* au1x00_pcmcia_sock_init()
- *
- * (Re-)Initialise the socket, turning on status interrupts
- * and PCMCIA bus.  This must wait for power to stabilise
- * so that the card status signals report correctly.
- *
- * Returns: 0
- */
-static int au1x00_pcmcia_sock_init(struct pcmcia_socket *sock)
-{
-	struct au1000_pcmcia_socket *skt = to_au1000_socket(sock);
-
-	debug("initializing socket %u\n", skt->nr);
-
-	skt->ops->socket_init(skt);
-	return 0;
-}
-
-/*
- * au1x00_pcmcia_suspend()
- *
- * Remove power on the socket, disable IRQs from the card.
- * Turn off status interrupts, and disable the PCMCIA bus.
- *
- * Returns: 0
- */
-static int au1x00_pcmcia_suspend(struct pcmcia_socket *sock)
-{
-	struct au1000_pcmcia_socket *skt = to_au1000_socket(sock);
-
-	debug("suspending socket %u\n", skt->nr);
-
-	skt->ops->socket_suspend(skt);
-
-	return 0;
-}
-
-static DEFINE_SPINLOCK(status_lock);
-
-/*
- * au1x00_check_status()
- */
-static void au1x00_check_status(struct au1000_pcmcia_socket *skt)
-{
-	unsigned int events;
-
-	debug("entering PCMCIA monitoring thread\n");
-
-	do {
-		unsigned int status;
-		unsigned long flags;
-
-		status = au1x00_pcmcia_skt_state(skt);
-
-		spin_lock_irqsave(&status_lock, flags);
-		events = (status ^ skt->status) & skt->cs_state.csc_mask;
-		skt->status = status;
-		spin_unlock_irqrestore(&status_lock, flags);
-
-		debug("events: %s%s%s%s%s%s\n",
-			events == 0         ? "<NONE>"   : "",
-			events & SS_DETECT  ? "DETECT "  : "",
-			events & SS_READY   ? "READY "   : "",
-			events & SS_BATDEAD ? "BATDEAD " : "",
-			events & SS_BATWARN ? "BATWARN " : "",
-			events & SS_STSCHG  ? "STSCHG "  : "");
-
-		if (events)
-			pcmcia_parse_events(&skt->socket, events);
-	} while (events);
-}
-
-/* 
- * au1x00_pcmcia_poll_event()
- * Let's poll for events in addition to IRQs since IRQ only is unreliable...
- */
-static void au1x00_pcmcia_poll_event(unsigned long dummy)
-{
-	struct au1000_pcmcia_socket *skt = (struct au1000_pcmcia_socket *)dummy;
-	debug("polling for events\n");
-
-	mod_timer(&skt->poll_timer, jiffies + AU1000_PCMCIA_POLL_PERIOD);
-
-	au1x00_check_status(skt);
-}
-
-/* au1x00_pcmcia_get_status()
- *
- * From the sa11xx_core.c:
- * Implements the get_status() operation for the in-kernel PCMCIA
- * service (formerly SS_GetStatus in Card Services). Essentially just
- * fills in bits in `status' according to internal driver state or
- * the value of the voltage detect chipselect register.
- *
- * As a debugging note, during card startup, the PCMCIA core issues
- * three set_socket() commands in a row the first with RESET deasserted,
- * the second with RESET asserted, and the last with RESET deasserted
- * again. Following the third set_socket(), a get_status() command will
- * be issued. The kernel is looking for the SS_READY flag (see
- * setup_socket(), reset_socket(), and unreset_socket() in cs.c).
- *
- * Returns: 0
- */
-static int
-au1x00_pcmcia_get_status(struct pcmcia_socket *sock, unsigned int *status)
-{
-	struct au1000_pcmcia_socket *skt = to_au1000_socket(sock);
-
-	skt->status = au1x00_pcmcia_skt_state(skt);
-	*status = skt->status;
-
-	return 0;
-}
-
-/* au1x00_pcmcia_set_socket()
- * Implements the set_socket() operation for the in-kernel PCMCIA
- * service (formerly SS_SetSocket in Card Services). We more or
- * less punt all of this work and let the kernel handle the details
- * of power configuration, reset, &c. We also record the value of
- * `state' in order to regurgitate it to the PCMCIA core later.
- *
- * Returns: 0
- */
-static int
-au1x00_pcmcia_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
-{
-  struct au1000_pcmcia_socket *skt = to_au1000_socket(sock);
-
-  debug("for sock %u\n", skt->nr);
-
-  debug("\tmask:  %s%s%s%s%s%s\n\tflags: %s%s%s%s%s%s\n",
-	(state->csc_mask==0)?"<NONE>":"",
-	(state->csc_mask&SS_DETECT)?"DETECT ":"",
-	(state->csc_mask&SS_READY)?"READY ":"",
-	(state->csc_mask&SS_BATDEAD)?"BATDEAD ":"",
-	(state->csc_mask&SS_BATWARN)?"BATWARN ":"",
-	(state->csc_mask&SS_STSCHG)?"STSCHG ":"",
-	(state->flags==0)?"<NONE>":"",
-	(state->flags&SS_PWR_AUTO)?"PWR_AUTO ":"",
-	(state->flags&SS_IOCARD)?"IOCARD ":"",
-	(state->flags&SS_RESET)?"RESET ":"",
-	(state->flags&SS_SPKR_ENA)?"SPKR_ENA ":"",
-	(state->flags&SS_OUTPUT_ENA)?"OUTPUT_ENA ":"");
-  debug("\tVcc %d  Vpp %d  irq %d\n",
-	state->Vcc, state->Vpp, state->io_irq);
-
-  return au1x00_pcmcia_config_skt(skt, state);
-}
-
-int 
-au1x00_pcmcia_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *map)
-{
-	struct au1000_pcmcia_socket *skt = to_au1000_socket(sock);
-	unsigned int speed;
-
-	if(map->map>=MAX_IO_WIN){
-		debug("map (%d) out of range\n", map->map);
-		return -1;
-	}
-
-	if(map->flags&MAP_ACTIVE){
-		speed=(map->speed>0)?map->speed:AU1000_PCMCIA_IO_SPEED;
-		skt->spd_io[map->map] = speed;
-	}
-
-	map->start=(unsigned int)(u32)skt->virt_io;
-	map->stop=map->start+MAP_SIZE;
-	return 0;
-
-}  /* au1x00_pcmcia_set_io_map() */
-
-
-static int 
-au1x00_pcmcia_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *map)
-{
-	struct au1000_pcmcia_socket *skt = to_au1000_socket(sock);
-	unsigned short speed = map->speed;
-
-	if(map->map>=MAX_WIN){
-		debug("map (%d) out of range\n", map->map);
-		return -1;
-	}
-
-	if (map->flags & MAP_ATTRIB) {
-		skt->spd_attr[map->map] = speed;
-		skt->spd_mem[map->map] = 0;
-	} else {
-		skt->spd_attr[map->map] = 0;
-		skt->spd_mem[map->map] = speed;
-	}
-
-	if (map->flags & MAP_ATTRIB) {
-		map->static_start = skt->phys_attr + map->card_start;
-	}
-	else {
-		map->static_start = skt->phys_mem + map->card_start;
-	}
-
-	debug("set_mem_map %d start %08lx card_start %08x\n",
-			map->map, map->static_start, map->card_start);
-	return 0;
-
-}  /* au1x00_pcmcia_set_mem_map() */
-
-static struct pccard_operations au1x00_pcmcia_operations = {
-	.init			= au1x00_pcmcia_sock_init,
-	.suspend		= au1x00_pcmcia_suspend,
-	.get_status		= au1x00_pcmcia_get_status,
-	.set_socket		= au1x00_pcmcia_set_socket,
-	.set_io_map		= au1x00_pcmcia_set_io_map,
-	.set_mem_map		= au1x00_pcmcia_set_mem_map,
-};
-
-static const char *skt_names[] = {
-	"PCMCIA socket 0",
-	"PCMCIA socket 1",
-};
-
-struct skt_dev_info {
-	int nskt;
-};
-
-int au1x00_pcmcia_socket_probe(struct device *dev, struct pcmcia_low_level *ops, int first, int nr)
-{
-	struct skt_dev_info *sinfo;
-	struct au1000_pcmcia_socket *skt;
-	int ret, i;
-
-	sinfo = kzalloc(sizeof(struct skt_dev_info), GFP_KERNEL);
-	if (!sinfo) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	sinfo->nskt = nr;
-
-	/*
-	 * Initialise the per-socket structure.
-	 */
-	for (i = 0; i < nr; i++) {
-		skt = PCMCIA_SOCKET(i);
-		memset(skt, 0, sizeof(*skt));
-
-		skt->socket.resource_ops = &pccard_static_ops;
-		skt->socket.ops = &au1x00_pcmcia_operations;
-		skt->socket.owner = ops->owner;
-		skt->socket.dev.parent = dev;
-
-		init_timer(&skt->poll_timer);
-		skt->poll_timer.function = au1x00_pcmcia_poll_event;
-		skt->poll_timer.data = (unsigned long)skt;
-		skt->poll_timer.expires = jiffies + AU1000_PCMCIA_POLL_PERIOD;
-
-		skt->nr		= first + i;
-		skt->irq	= 255;
-		skt->dev	= dev;
-		skt->ops	= ops;
-
-		skt->res_skt.name	= skt_names[skt->nr];
-		skt->res_io.name	= "io";
-		skt->res_io.flags	= IORESOURCE_MEM | IORESOURCE_BUSY;
-		skt->res_mem.name	= "memory";
-		skt->res_mem.flags	= IORESOURCE_MEM;
-		skt->res_attr.name	= "attribute";
-		skt->res_attr.flags	= IORESOURCE_MEM;
-
-		/*
-		 * PCMCIA client drivers use the inb/outb macros to access the
-		 * IO registers. Since mips_io_port_base is added to the
-		 * access address of the mips implementation of inb/outb,
-		 * we need to subtract it here because we want to access the
-		 * I/O or MEM address directly, without going through this
-		 * "mips_io_port_base" mechanism.
-		 */
-		if (i == 0) {
-			skt->virt_io = (void *)
-				(ioremap((phys_t)AU1X_SOCK0_IO, 0x1000) -
-				(u32)mips_io_port_base);
-			skt->phys_attr = AU1X_SOCK0_PHYS_ATTR;
-			skt->phys_mem = AU1X_SOCK0_PHYS_MEM;
-		}
-		else  {
-			skt->virt_io = (void *)
-				(ioremap((phys_t)AU1X_SOCK1_IO, 0x1000) -
-				(u32)mips_io_port_base);
-			skt->phys_attr = AU1X_SOCK1_PHYS_ATTR;
-			skt->phys_mem = AU1X_SOCK1_PHYS_MEM;
-		}
-		pcmcia_base_vaddrs[i] = (u32 *)skt->virt_io;
-		ret = ops->hw_init(skt);
-
-		skt->socket.features = SS_CAP_STATIC_MAP|SS_CAP_PCCARD;
-		skt->socket.irq_mask = 0;
-		skt->socket.map_size = MAP_SIZE;
-		skt->socket.pci_irq = skt->irq;
-		skt->socket.io_offset = (unsigned long)skt->virt_io;
-
-		skt->status = au1x00_pcmcia_skt_state(skt);
-
-		ret = pcmcia_register_socket(&skt->socket);
-		if (ret)
-			goto out_err;
-
-		WARN_ON(skt->socket.sock != i);
-
-		add_timer(&skt->poll_timer);
-	}
-
-	dev_set_drvdata(dev, sinfo);
-	return 0;
-
-
-out_err:
-	ops->hw_shutdown(skt);
-	while (i-- > 0) {
-		skt = PCMCIA_SOCKET(i);
-
-		del_timer_sync(&skt->poll_timer);
-		pcmcia_unregister_socket(&skt->socket);
-		if (i == 0) {
-			iounmap(skt->virt_io + (u32)mips_io_port_base);
-			skt->virt_io = NULL;
-		}
-#ifndef CONFIG_MIPS_XXS1500
-		else {
-			iounmap(skt->virt_io + (u32)mips_io_port_base);
-			skt->virt_io = NULL;
-		}
-#endif
-		ops->hw_shutdown(skt);
-
-	}
-	kfree(sinfo);
-out:
-	return ret;
-}
-
-int au1x00_drv_pcmcia_remove(struct platform_device *dev)
-{
-	struct skt_dev_info *sinfo = platform_get_drvdata(dev);
-	int i;
-
-	mutex_lock(&pcmcia_sockets_lock);
-	platform_set_drvdata(dev, NULL);
-
-	for (i = 0; i < sinfo->nskt; i++) {
-		struct au1000_pcmcia_socket *skt = PCMCIA_SOCKET(i);
-
-		del_timer_sync(&skt->poll_timer);
-		pcmcia_unregister_socket(&skt->socket);
-		skt->ops->hw_shutdown(skt);
-		au1x00_pcmcia_config_skt(skt, &dead_socket);
-		iounmap(skt->virt_io + (u32)mips_io_port_base);
-		skt->virt_io = NULL;
-	}
-
-	kfree(sinfo);
-	mutex_unlock(&pcmcia_sockets_lock);
-	return 0;
-}
-
-
-/*
- * PCMCIA "Driver" API
- */
-
-static int au1x00_drv_pcmcia_probe(struct platform_device *dev)
-{
-	int i, ret = -ENODEV;
-
-	mutex_lock(&pcmcia_sockets_lock);
-	for (i=0; i < ARRAY_SIZE(au1x00_pcmcia_hw_init); i++) {
-		ret = au1x00_pcmcia_hw_init[i](&dev->dev);
-		if (ret == 0)
-			break;
-	}
-	mutex_unlock(&pcmcia_sockets_lock);
-	return ret;
-}
-
-static struct platform_driver au1x00_pcmcia_driver = {
-	.driver = {
-		.name		= "au1x00-pcmcia",
-		.owner		= THIS_MODULE,
-	},
-	.probe		= au1x00_drv_pcmcia_probe,
-	.remove		= au1x00_drv_pcmcia_remove,
-};
-
-
-/* au1x00_pcmcia_init()
- *
- * This routine performs low-level PCMCIA initialization and then
- * registers this socket driver with Card Services.
- *
- * Returns: 0 on success, -ve error code on failure
- */
-static int __init au1x00_pcmcia_init(void)
-{
-	int error = 0;
-	error = platform_driver_register(&au1x00_pcmcia_driver);
-	return error;
-}
-
-/* au1x00_pcmcia_exit()
- * Invokes the low-level kernel service to free IRQs associated with this
- * socket controller and reset GPIO edge detection.
- */
-static void __exit au1x00_pcmcia_exit(void)
-{
-	platform_driver_unregister(&au1x00_pcmcia_driver);
-}
-
-module_init(au1x00_pcmcia_init);
-module_exit(au1x00_pcmcia_exit);
diff --git a/drivers/pcmcia/au1000_generic.h b/drivers/pcmcia/au1000_generic.h
deleted file mode 100644
index 5c36bda..0000000
--- a/drivers/pcmcia/au1000_generic.h
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * Alchemy Semi Au1000 pcmcia driver include file
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *         	ppopov at mvista.com or source at mvista.com
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-#ifndef __ASM_AU1000_PCMCIA_H
-#define __ASM_AU1000_PCMCIA_H
-
-/* include the world */
-
-#include <pcmcia/ss.h>
-#include <pcmcia/cistpl.h>
-#include "cs_internal.h"
-
-#define AU1000_PCMCIA_POLL_PERIOD    (2*HZ)
-#define AU1000_PCMCIA_IO_SPEED       (255)
-#define AU1000_PCMCIA_MEM_SPEED      (300)
-
-#define AU1X_SOCK0_IO        0xF00000000ULL
-#define AU1X_SOCK0_PHYS_ATTR 0xF40000000ULL
-#define AU1X_SOCK0_PHYS_MEM  0xF80000000ULL
-
-/* pcmcia socket 1 needs external glue logic so the memory map
- * differs from board to board.
- */
-#if defined(CONFIG_MIPS_PB1000)
-#define AU1X_SOCK1_IO        0xF08000000ULL
-#define AU1X_SOCK1_PHYS_ATTR 0xF48000000ULL
-#define AU1X_SOCK1_PHYS_MEM  0xF88000000ULL
-#endif
-
-struct pcmcia_state {
-  unsigned detect: 1,
-            ready: 1,
-           wrprot: 1,
-	     bvd1: 1,
-	     bvd2: 1,
-            vs_3v: 1,
-            vs_Xv: 1;
-};
-
-struct pcmcia_configure {
-  unsigned sock: 8,
-            vcc: 8,
-            vpp: 8,
-         output: 1,
-        speaker: 1,
-          reset: 1;
-};
-
-struct pcmcia_irqs {
-	int sock;
-	int irq;
-	const char *str;
-};
-
-
-struct au1000_pcmcia_socket {
-	struct pcmcia_socket socket;
-
-	/*
-	 * Info from low level handler
-	 */
-	struct device		*dev;
-	unsigned int		nr;
-	unsigned int		irq;
-
-	/*
-	 * Core PCMCIA state
-	 */
-	struct pcmcia_low_level *ops;
-
-	unsigned int 		status;
-	socket_state_t		cs_state;
-
-	unsigned short		spd_io[MAX_IO_WIN];
-	unsigned short		spd_mem[MAX_WIN];
-	unsigned short		spd_attr[MAX_WIN];
-
-	struct resource		res_skt;
-	struct resource		res_io;
-	struct resource		res_mem;
-	struct resource		res_attr;
-
-	void *                 	virt_io;
-	unsigned int		phys_io;
-	unsigned int           	phys_attr;
-	unsigned int           	phys_mem;
-	unsigned short        	speed_io, speed_attr, speed_mem;
-
-	unsigned int		irq_state;
-
-	struct timer_list	poll_timer;
-};
-
-struct pcmcia_low_level {
-	struct module *owner;
-
-	int (*hw_init)(struct au1000_pcmcia_socket *);
-	void (*hw_shutdown)(struct au1000_pcmcia_socket *);
-
-	void (*socket_state)(struct au1000_pcmcia_socket *, struct pcmcia_state *);
-	int (*configure_socket)(struct au1000_pcmcia_socket *, struct socket_state_t *);
-
-	/*
-	 * Enable card status IRQs on (re-)initialisation.  This can
-	 * be called at initialisation, power management event, or
-	 * pcmcia event.
-	 */
-	void (*socket_init)(struct au1000_pcmcia_socket *);
-
-	/*
-	 * Disable card status IRQs and PCMCIA bus on suspend.
-	 */
-	void (*socket_suspend)(struct au1000_pcmcia_socket *);
-};
-
-extern int au1x_board_init(struct device *dev);
-
-#endif /* __ASM_AU1000_PCMCIA_H */
diff --git a/drivers/pcmcia/au1000_pb1x00.c b/drivers/pcmcia/au1000_pb1x00.c
deleted file mode 100644
index b239664..0000000
--- a/drivers/pcmcia/au1000_pb1x00.c
+++ /dev/null
@@ -1,294 +0,0 @@
-/*
- *
- * Alchemy Semi Pb1000 boards specific pcmcia routines.
- *
- * Copyright 2002 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *         	ppopov at mvista.com or source at mvista.com
- *
- * ########################################################################
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/ioport.h>
-#include <linux/kernel.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/proc_fs.h>
-#include <linux/types.h>
-
-#include <pcmcia/ss.h>
-#include <pcmcia/cistpl.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-
-#include <asm/au1000.h>
-#include <asm/au1000_pcmcia.h>
-
-#define debug(fmt, arg...) do { } while (0)
-
-#include <asm/pb1000.h>
-#define PCMCIA_IRQ AU1000_GPIO_15
-
-static int pb1x00_pcmcia_init(struct pcmcia_init *init)
-{
-	u16 pcr;
-	pcr = PCR_SLOT_0_RST | PCR_SLOT_1_RST;
-
-	au_writel(0x8000, PB1000_MDR); /* clear pcmcia interrupt */
-	au_sync_delay(100);
-	au_writel(0x4000, PB1000_MDR); /* enable pcmcia interrupt */
-	au_sync();
-
-	pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,0);
-	pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,1);
-	au_writel(pcr, PB1000_PCR);
-	au_sync_delay(20);
-	  
-	return PCMCIA_NUM_SOCKS;
-}
-
-static int pb1x00_pcmcia_shutdown(void)
-{
-	u16 pcr;
-	pcr = PCR_SLOT_0_RST | PCR_SLOT_1_RST;
-	pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,0);
-	pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,1);
-	au_writel(pcr, PB1000_PCR);
-	au_sync_delay(20);
-	return 0;
-}
-
-static int 
-pb1x00_pcmcia_socket_state(unsigned sock, struct pcmcia_state *state)
-{
-	u32 inserted0, inserted1;
-	u16 vs0, vs1;
-
-	vs0 = vs1 = (u16)au_readl(PB1000_ACR1);
-	inserted0 = !(vs0 & (ACR1_SLOT_0_CD1 | ACR1_SLOT_0_CD2));
-	inserted1 = !(vs1 & (ACR1_SLOT_1_CD1 | ACR1_SLOT_1_CD2));
-	vs0 = (vs0 >> 4) & 0x3;
-	vs1 = (vs1 >> 12) & 0x3;
-
-	state->ready = 0;
-	state->vs_Xv = 0;
-	state->vs_3v = 0;
-	state->detect = 0;
-
-	if (sock == 0) {
-		if (inserted0) {
-			switch (vs0) {
-				case 0:
-				case 2:
-					state->vs_3v=1;
-					break;
-				case 3: /* 5V */
-					break;
-				default:
-					/* return without setting 'detect' */
-					printk(KERN_ERR "pb1x00 bad VS (%d)\n",
-							vs0);
-					return 0;
-			}
-			state->detect = 1;
-		}
-	}
-	else  {
-		if (inserted1) {
-			switch (vs1) {
-				case 0:
-				case 2:
-					state->vs_3v=1;
-					break;
-				case 3: /* 5V */
-					break;
-				default:
-					/* return without setting 'detect' */
-					printk(KERN_ERR "pb1x00 bad VS (%d)\n",
-							vs1);
-					return 0;
-			}
-			state->detect = 1;
-		}
-	}
-
-	if (state->detect) {
-		state->ready = 1;
-	}
-
-	state->bvd1=1;
-	state->bvd2=1;
-	state->wrprot=0; 
-	return 1;
-}
-
-
-static int pb1x00_pcmcia_get_irq_info(struct pcmcia_irq_info *info)
-{
-
-	if(info->sock > PCMCIA_MAX_SOCK) return -1;
-
-	/*
-	 * Even in the case of the Pb1000, both sockets are connected
-	 * to the same irq line.
-	 */
-	info->irq = PCMCIA_IRQ;
-
-	return 0;
-}
-
-
-static int 
-pb1x00_pcmcia_configure_socket(const struct pcmcia_configure *configure)
-{
-	u16 pcr;
-
-	if(configure->sock > PCMCIA_MAX_SOCK) return -1;
-
-	pcr = au_readl(PB1000_PCR);
-
-	if (configure->sock == 0) {
-		pcr &= ~(PCR_SLOT_0_VCC0 | PCR_SLOT_0_VCC1 | 
-				PCR_SLOT_0_VPP0 | PCR_SLOT_0_VPP1);
-	}
-	else  {
-		pcr &= ~(PCR_SLOT_1_VCC0 | PCR_SLOT_1_VCC1 | 
-				PCR_SLOT_1_VPP0 | PCR_SLOT_1_VPP1);
-	}
-
-	pcr &= ~PCR_SLOT_0_RST;
-	debug("Vcc %dV Vpp %dV, pcr %x\n", 
-			configure->vcc, configure->vpp, pcr);
-	switch(configure->vcc){
-		case 0:  /* Vcc 0 */
-			switch(configure->vpp) {
-				case 0:
-					pcr |= SET_VCC_VPP(VCC_HIZ,VPP_GND,
-							configure->sock);
-					break;
-				case 12:
-					pcr |= SET_VCC_VPP(VCC_HIZ,VPP_12V,
-							configure->sock);
-					break;
-				case 50:
-					pcr |= SET_VCC_VPP(VCC_HIZ,VPP_5V,
-							configure->sock);
-					break;
-				case 33:
-					pcr |= SET_VCC_VPP(VCC_HIZ,VPP_3V,
-							configure->sock);
-					break;
-				default:
-					pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,
-							configure->sock);
-					printk("%s: bad Vcc/Vpp (%d:%d)\n", 
-							__func__,
-							configure->vcc, 
-							configure->vpp);
-					break;
-			}
-			break;
-		case 50: /* Vcc 5V */
-			switch(configure->vpp) {
-				case 0:
-					pcr |= SET_VCC_VPP(VCC_5V,VPP_GND,
-							configure->sock);
-					break;
-				case 50:
-					pcr |= SET_VCC_VPP(VCC_5V,VPP_5V,
-							configure->sock);
-					break;
-				case 12:
-					pcr |= SET_VCC_VPP(VCC_5V,VPP_12V,
-							configure->sock);
-					break;
-				case 33:
-					pcr |= SET_VCC_VPP(VCC_5V,VPP_3V,
-							configure->sock);
-					break;
-				default:
-					pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,
-							configure->sock);
-					printk("%s: bad Vcc/Vpp (%d:%d)\n", 
-							__func__,
-							configure->vcc, 
-							configure->vpp);
-					break;
-			}
-			break;
-		case 33: /* Vcc 3.3V */
-			switch(configure->vpp) {
-				case 0:
-					pcr |= SET_VCC_VPP(VCC_3V,VPP_GND,
-							configure->sock);
-					break;
-				case 50:
-					pcr |= SET_VCC_VPP(VCC_3V,VPP_5V,
-							configure->sock);
-					break;
-				case 12:
-					pcr |= SET_VCC_VPP(VCC_3V,VPP_12V,
-							configure->sock);
-					break;
-				case 33:
-					pcr |= SET_VCC_VPP(VCC_3V,VPP_3V,
-							configure->sock);
-					break;
-				default:
-					pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,
-							configure->sock);
-					printk("%s: bad Vcc/Vpp (%d:%d)\n", 
-							__func__,
-							configure->vcc, 
-							configure->vpp);
-					break;
-			}
-			break;
-		default: /* what's this ? */
-			pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,configure->sock);
-			printk(KERN_ERR "%s: bad Vcc %d\n", 
-					__func__, configure->vcc);
-			break;
-	}
-
-	if (configure->sock == 0) {
-	pcr &= ~(PCR_SLOT_0_RST);
-		if (configure->reset)
-		pcr |= PCR_SLOT_0_RST;
-	}
-	else {
-		pcr &= ~(PCR_SLOT_1_RST);
-		if (configure->reset)
-			pcr |= PCR_SLOT_1_RST;
-	}
-	au_writel(pcr, PB1000_PCR);
-	au_sync_delay(300);
-
-	return 0;
-}
-
-
-struct pcmcia_low_level pb1x00_pcmcia_ops = { 
-	pb1x00_pcmcia_init,
-	pb1x00_pcmcia_shutdown,
-	pb1x00_pcmcia_socket_state,
-	pb1x00_pcmcia_get_irq_info,
-	pb1x00_pcmcia_configure_socket
-};
-- 
1.7.7.1



From a.zarina at kimo.com  Wed Nov  2 10:24:04 2011
From: a.zarina at kimo.com (Mrs. Zarina Al-Usman)
Date: Wed, 2 Nov 2011 14:24:04 GMT
Subject: My Desire to work with you
Message-ID: <dd3qw8kLu2Nv6KKTh4LH6vu3KczuioDQdu5tLDO1HR6T@kimo.com>

Dearest,

My name is Mrs. Zarina Al-Usman, I am 59 years old and I was diagnosed for cancer for about 2 years ago. I have being lying critically ill at the hospital since January 12th, 2010 when I was recently diagnosed with Hypoglycaemia.

I am not in the position to disburse these funds myself as a result of my health. I decided to will it to you so you can help me disburse the funds to some charity organization in your country; am helping you, so you can develop the time to disburse these funds on my behalf. I decided to WILL/donate some huge amount which was left over by my late husband; I know for sure you will be surprised if such things still happens, believe me the doctor says my chance of survival is very low

Arrangements have been made with my attorney on how these funds should be transferred to your account from my bank. The necessary documents have been signed and ascertained. I am in an Intensive ward where I do not have access to receive calls as a result of my health condition.

You are to work with my attorney who will assist in these funds transfer to your account. The State tax have been paid on the day of deposit with the Bank. I will give you the contacts of my lawyer as soon as I hear from you.

Meanwhile you are advised to keep this mail and its contents confidential as I really want my wish accomplish at the end of the day without any of my relatives knowing about these funds, please do remember me in your prayers as I give you the assurance that this is legal.

Regards,

Mrs. Zarina Al-Usman



From ralf at linux-mips.org  Wed Nov  9 09:48:12 2011
From: ralf at linux-mips.org (Ralf Baechle)
Date: Wed, 9 Nov 2011 14:48:12 +0000
Subject: [PATCH RESEND 01/18] MIPS: Alchemy: remove PB1000 support
In-Reply-To: <1320234824-28604-1-git-send-email-manuel.lauss@googlemail.com>
References: <1320174224-27305-2-git-send-email-manuel.lauss@googlemail.com>
 <1320234824-28604-1-git-send-email-manuel.lauss@googlemail.com>
Message-ID: <20111109144812.GA19187@linux-mips.org>

On Wed, Nov 02, 2011 at 12:53:44PM +0100, Manuel Lauss wrote:

> Noone seems to have test hardware or care anymore.  Drop PB1000 support
> and along with it the old Alchemy PCMCIA socket driver.

Nobody (n)acked so I queued this one for 3.3.

Thanks,

  Ralf


From mary.zheng at yahoo.cn  Wed Nov 16 23:13:18 2011
From: mary.zheng at yahoo.cn (mary)
Date: Thu, 17 Nov 2011 12:13:18 +0800 (CST)
Subject: LED bathroom products -- Update(025)
Message-ID: <76ace537.23ee.133afba8c49.Coremail.mary.zheng@yahoo.cn>

Dear Madam/Sir,
How are you!
We are Chinese Manufacturer of sanitary products. I send you the pictures of our beautiful products. If you are interested, please reply for further information. Thanks. 
Best wishes.
Mary
Sales manager
Cixi Langhua Electronic Co.,ltd.
Email: mary.zheng at yahoo.cn

iurethuighoiuageruiogiugtpuiedpshhhhuygweseth54gy6dr8u798yte7u6847135g41h6
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/linux-pcmcia/attachments/20111117/02ebde1b/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: LED Shower Products.jpg
Type: image/jpeg
Size: 42818 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-pcmcia/attachments/20111117/02ebde1b/attachment-0003.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: LED Faucet Lighting.jpg
Type: image/jpeg
Size: 20728 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-pcmcia/attachments/20111117/02ebde1b/attachment-0004.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: LED hand Shower.jpg
Type: image/jpeg
Size: 29600 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-pcmcia/attachments/20111117/02ebde1b/attachment-0005.jpg>

From manoj.kr.jha at gmail.com  Sun Nov 20 03:59:42 2011
From: manoj.kr.jha at gmail.com (Manoj Kumar Jha)
Date: Sun, 20 Nov 2011 00:59:42 -0800
Subject: No subject
Message-ID: <CACGcQZPfQ5OcMV0Yw5wT4-J0ENpXb5OBfdh1JQiivE321oWDEQ@mail.gmail.com>

.It?s the only solution to your problems!
http://femmesdeveloppement.org/p.g.php?llink_friend_id=56yn9


From migno18 at yahoo.it  Sun Nov 20 05:40:49 2011
From: migno18 at yahoo.it (filippo mignogna)
Date: Sun, 20 Nov 2011 10:40:49 +0000 (GMT)
Subject: No subject
Message-ID: <1321785649.35418.yint-ygo-j2me@web26905.mail.ukl.yahoo.com>

http://woods-web.com/g2data/ptnnt.htm


From kannykan at netvigator.com  Tue Nov 22 05:02:57 2011
From: kannykan at netvigator.com (=?gb2312?B?s8LH7cGs?=)
Date: Tue, 22 Nov 2011 18:02:57 +0800
Subject: =?gb2312?B?NjA0vbW1zdPDuaS3qMLJt+fP1brNs8mxvrXIzsrM4mt2cA==?=
Message-ID: <8D67C1CFA3DD467D6C254F334D02341E@oslelusfk>

An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/linux-pcmcia/attachments/20111122/4598c476/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ?????????????.xls
Type: application/vnd.ms-excel
Size: 36864 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-pcmcia/attachments/20111122/4598c476/attachment-0001.xls>

From axel.lin at gmail.com  Sat Nov 26 23:53:06 2011
From: axel.lin at gmail.com (Axel Lin)
Date: Sun, 27 Nov 2011 12:53:06 +0800
Subject: [PATCH] pcmcia: convert drivers/pcmcia/* to use
 module_platform_driver()
Message-ID: <1322369586.2522.3.camel@phoenix>

This patch converts the drivers in drivers/pcmcia/* to use the
module_platform_driver() macro which makes the code smaller and a bit
simpler.

Cc: Michael Hennerich <hennerich at blackfin.uclinux.org>
Cc: Manuel Lauss <manuel.lauss at gmail.com>
Cc: Olof Johansson <olof at lixom.net>
Cc: Marc Zyngier <maz at misterjones.org>
Signed-off-by: Axel Lin <axel.lin at gmail.com>
---
 drivers/pcmcia/bfin_cf_pcmcia.c |   13 +------------
 drivers/pcmcia/db1xxx_ss.c      |   13 +------------
 drivers/pcmcia/electra_cf.c     |   12 +-----------
 drivers/pcmcia/m8xx_pcmcia.c    |   13 +------------
 drivers/pcmcia/pxa2xx_viper.c   |   13 +------------
 drivers/pcmcia/xxs1500_ss.c     |   13 +------------
 6 files changed, 6 insertions(+), 71 deletions(-)

diff --git a/drivers/pcmcia/bfin_cf_pcmcia.c b/drivers/pcmcia/bfin_cf_pcmcia.c
index 4922139..ac1a223 100644
--- a/drivers/pcmcia/bfin_cf_pcmcia.c
+++ b/drivers/pcmcia/bfin_cf_pcmcia.c
@@ -310,18 +310,7 @@ static struct platform_driver bfin_cf_driver = {
 	.remove = __devexit_p(bfin_cf_remove),
 };
 
-static int __init bfin_cf_init(void)
-{
-	return platform_driver_register(&bfin_cf_driver);
-}
-
-static void __exit bfin_cf_exit(void)
-{
-	platform_driver_unregister(&bfin_cf_driver);
-}
-
-module_init(bfin_cf_init);
-module_exit(bfin_cf_exit);
+module_platform_driver(bfin_cf_driver);
 
 MODULE_AUTHOR("Michael Hennerich <hennerich at blackfin.uclinux.org>");
 MODULE_DESCRIPTION("BFIN CF/PCMCIA Driver");
diff --git a/drivers/pcmcia/db1xxx_ss.c b/drivers/pcmcia/db1xxx_ss.c
index 5b7c227..ba299a2 100644
--- a/drivers/pcmcia/db1xxx_ss.c
+++ b/drivers/pcmcia/db1xxx_ss.c
@@ -580,18 +580,7 @@ static struct platform_driver db1x_pcmcia_socket_driver = {
 	.remove		= __devexit_p(db1x_pcmcia_socket_remove),
 };
 
-int __init db1x_pcmcia_socket_load(void)
-{
-	return platform_driver_register(&db1x_pcmcia_socket_driver);
-}
-
-void  __exit db1x_pcmcia_socket_unload(void)
-{
-	platform_driver_unregister(&db1x_pcmcia_socket_driver);
-}
-
-module_init(db1x_pcmcia_socket_load);
-module_exit(db1x_pcmcia_socket_unload);
+module_platform_driver(db1x_pcmcia_socket_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("PCMCIA Socket Services for Alchemy Db/Pb1x00 boards");
diff --git a/drivers/pcmcia/electra_cf.c b/drivers/pcmcia/electra_cf.c
index 06ad3e5..7647d23 100644
--- a/drivers/pcmcia/electra_cf.c
+++ b/drivers/pcmcia/electra_cf.c
@@ -365,17 +365,7 @@ static struct platform_driver electra_cf_driver = {
 	.remove   = electra_cf_remove,
 };
 
-static int __init electra_cf_init(void)
-{
-	return platform_driver_register(&electra_cf_driver);
-}
-module_init(electra_cf_init);
-
-static void __exit electra_cf_exit(void)
-{
-	platform_driver_unregister(&electra_cf_driver);
-}
-module_exit(electra_cf_exit);
+module_platform_driver(electra_cf_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR ("Olof Johansson <olof at lixom.net>");
diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c
index 271a590..b120928 100644
--- a/drivers/pcmcia/m8xx_pcmcia.c
+++ b/drivers/pcmcia/m8xx_pcmcia.c
@@ -1304,15 +1304,4 @@ static struct platform_driver m8xx_pcmcia_driver = {
 	.remove = m8xx_remove,
 };
 
-static int __init m8xx_init(void)
-{
-	return platform_driver_register(&m8xx_pcmcia_driver);
-}
-
-static void __exit m8xx_exit(void)
-{
-	platform_driver_unregister(&m8xx_pcmcia_driver);
-}
-
-module_init(m8xx_init);
-module_exit(m8xx_exit);
+module_platform_driver(m8xx_pcmcia_driver);
diff --git a/drivers/pcmcia/pxa2xx_viper.c b/drivers/pcmcia/pxa2xx_viper.c
index 1064b1c..44f5c7f 100644
--- a/drivers/pcmcia/pxa2xx_viper.c
+++ b/drivers/pcmcia/pxa2xx_viper.c
@@ -204,18 +204,7 @@ static struct platform_driver viper_pcmcia_driver = {
 	.id_table	= viper_pcmcia_id_table,
 };
 
-static int __init viper_pcmcia_init(void)
-{
-	return platform_driver_register(&viper_pcmcia_driver);
-}
-
-static void __exit viper_pcmcia_exit(void)
-{
-	return platform_driver_unregister(&viper_pcmcia_driver);
-}
-
-module_init(viper_pcmcia_init);
-module_exit(viper_pcmcia_exit);
+module_platform_driver(viper_pcmcia_driver);
 
 MODULE_DEVICE_TABLE(platform, viper_pcmcia_id_table);
 MODULE_LICENSE("GPL");
diff --git a/drivers/pcmcia/xxs1500_ss.c b/drivers/pcmcia/xxs1500_ss.c
index 379f421..1ceff69 100644
--- a/drivers/pcmcia/xxs1500_ss.c
+++ b/drivers/pcmcia/xxs1500_ss.c
@@ -321,18 +321,7 @@ static struct platform_driver xxs1500_pcmcia_socket_driver = {
 	.remove		= __devexit_p(xxs1500_pcmcia_remove),
 };
 
-int __init xxs1500_pcmcia_socket_load(void)
-{
-	return platform_driver_register(&xxs1500_pcmcia_socket_driver);
-}
-
-void  __exit xxs1500_pcmcia_socket_unload(void)
-{
-	platform_driver_unregister(&xxs1500_pcmcia_socket_driver);
-}
-
-module_init(xxs1500_pcmcia_socket_load);
-module_exit(xxs1500_pcmcia_socket_unload);
+module_platform_driver(xxs1500_pcmcia_socket_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("PCMCIA Socket Services for MyCable XXS1500 systems");
-- 
1.7.5.4





From w.sang at pengutronix.de  Sun Nov 27 03:50:17 2011
From: w.sang at pengutronix.de (Wolfram Sang)
Date: Sun, 27 Nov 2011 09:50:17 +0100
Subject: [PATCH] pcmcia: convert drivers/pcmcia/* to use
 module_platform_driver()
In-Reply-To: <1322369586.2522.3.camel@phoenix>
References: <1322369586.2522.3.camel@phoenix>
Message-ID: <20111127085017.GB5263@pengutronix.de>

On Sun, Nov 27, 2011 at 12:53:06PM +0800, Axel Lin wrote:
> This patch converts the drivers in drivers/pcmcia/* to use the
> module_platform_driver() macro which makes the code smaller and a bit
> simpler.

Acked-by: Wolfram Sang <w.sang at pengutronix.de>

-- 
Pengutronix e.K.                           | Wolfram Sang                |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-pcmcia/attachments/20111127/8c49d71b/attachment.sig>

From olof at lixom.net  Sun Nov 27 13:19:57 2011
From: olof at lixom.net (Olof Johansson)
Date: Sun, 27 Nov 2011 10:19:57 -0800
Subject: [PATCH] pcmcia: convert drivers/pcmcia/* to use
 module_platform_driver()
In-Reply-To: <1322369586.2522.3.camel@phoenix>
References: <1322369586.2522.3.camel@phoenix>
Message-ID: <CAOesGMjM+WpQz=Gb8UKA_QD+DuLdwwskPskD8rdujf9B1sCqrA@mail.gmail.com>

On Sat, Nov 26, 2011 at 8:53 PM, Axel Lin <axel.lin at gmail.com> wrote:
> This patch converts the drivers in drivers/pcmcia/* to use the
> module_platform_driver() macro which makes the code smaller and a bit
> simpler.
>
> Cc: Michael Hennerich <hennerich at blackfin.uclinux.org>
> Cc: Manuel Lauss <manuel.lauss at gmail.com>
> Cc: Olof Johansson <olof at lixom.net>
> Cc: Marc Zyngier <maz at misterjones.org>
> Signed-off-by: Axel Lin <axel.lin at gmail.com>

Acked-by: Olof Johansson <olof at lixom.net>


-Olof


From michael.hennerich at analog.com  Mon Nov 28 02:48:46 2011
From: michael.hennerich at analog.com (Michael Hennerich)
Date: Mon, 28 Nov 2011 08:48:46 +0100
Subject: [PATCH] pcmcia: convert drivers/pcmcia/* to use
 module_platform_driver()
In-Reply-To: <1322369586.2522.3.camel@phoenix>
References: <1322369586.2522.3.camel@phoenix>
Message-ID: <4ED33CDE.4010103@analog.com>

On 11/27/2011 05:53 AM, Axel Lin wrote:
> This patch converts the drivers in drivers/pcmcia/* to use the
> module_platform_driver() macro which makes the code smaller and a bit
> simpler.
>
> Cc: Michael Hennerich<hennerich at blackfin.uclinux.org>
> Cc: Manuel Lauss<manuel.lauss at gmail.com>
> Cc: Olof Johansson<olof at lixom.net>
> Cc: Marc Zyngier<maz at misterjones.org>
> Signed-off-by: Axel Lin<axel.lin at gmail.com>
Acked-by: Michael Hennerich <michael.hennerich at analog.com>



-- 
Greetings,
Michael

--
Analog Devices GmbH      Wilhelm-Wagenfeld-Str. 6      80807 Muenchen
Sitz der Gesellschaft: Muenchen; Registergericht: Muenchen HRB 40368;
Geschaeftsfuehrer:Dr.Carsten Suckrow, Thomas Wessel, William A. Martin,
Margaret Seif




From maz at misterjones.org  Mon Nov 28 05:33:42 2011
From: maz at misterjones.org (Marc Zyngier)
Date: Mon, 28 Nov 2011 11:33:42 +0100
Subject: [PATCH] pcmcia: convert drivers/pcmcia/* to use
 =?UTF-8?Q?module=5Fplatform=5Fdriver=28=29?=
In-Reply-To: <1322369586.2522.3.camel@phoenix>
References: <1322369586.2522.3.camel@phoenix>
Message-ID: <d6963f1ecb253ca948d8106b10832fe1@localhost>


On Sun, 27 Nov 2011 12:53:06 +0800, Axel Lin <axel.lin at gmail.com> wrote:
> This patch converts the drivers in drivers/pcmcia/* to use the
> module_platform_driver() macro which makes the code smaller and a bit
> simpler.
> 
> Cc: Michael Hennerich <hennerich at blackfin.uclinux.org>
> Cc: Manuel Lauss <manuel.lauss at gmail.com>
> Cc: Olof Johansson <olof at lixom.net>
> Cc: Marc Zyngier <maz at misterjones.org>
> Signed-off-by: Axel Lin <axel.lin at gmail.com>
> ---
>  drivers/pcmcia/bfin_cf_pcmcia.c |   13 +------------
>  drivers/pcmcia/db1xxx_ss.c      |   13 +------------
>  drivers/pcmcia/electra_cf.c     |   12 +-----------
>  drivers/pcmcia/m8xx_pcmcia.c    |   13 +------------
>  drivers/pcmcia/pxa2xx_viper.c   |   13 +------------
>  drivers/pcmcia/xxs1500_ss.c     |   13 +------------
>  6 files changed, 6 insertions(+), 71 deletions(-)
> 

For the viper part:
Acked-by: Marc Zyngier <maz at misterjones.org>
-- 
Who you jivin' with that Cosmik Debris?


From manuel.lauss at googlemail.com  Tue Nov 29 01:29:06 2011
From: manuel.lauss at googlemail.com (Manuel Lauss)
Date: Tue, 29 Nov 2011 07:29:06 +0100
Subject: [PATCH] pcmcia: convert drivers/pcmcia/* to use
 module_platform_driver()
In-Reply-To: <1322369586.2522.3.camel@phoenix>
References: <1322369586.2522.3.camel@phoenix>
Message-ID: <CAOLZvyGnp5Uc0kOnHiLqn66=p100LkMaHnAYQR_mPwxbD465rQ@mail.gmail.com>

On Sun, Nov 27, 2011 at 5:53 AM, Axel Lin <axel.lin at gmail.com> wrote:
> This patch converts the drivers in drivers/pcmcia/* to use the
> module_platform_driver() macro which makes the code smaller and a bit
> simpler.
>
> Cc: Michael Hennerich <hennerich at blackfin.uclinux.org>
> Cc: Manuel Lauss <manuel.lauss at gmail.com>
> Cc: Olof Johansson <olof at lixom.net>
> Cc: Marc Zyngier <maz at misterjones.org>
> Signed-off-by: Axel Lin <axel.lin at gmail.com>
> ---
> ?drivers/pcmcia/bfin_cf_pcmcia.c | ? 13 +------------
> ?drivers/pcmcia/db1xxx_ss.c ? ? ?| ? 13 +------------
> ?drivers/pcmcia/electra_cf.c ? ? | ? 12 +-----------
> ?drivers/pcmcia/m8xx_pcmcia.c ? ?| ? 13 +------------
> ?drivers/pcmcia/pxa2xx_viper.c ? | ? 13 +------------
> ?drivers/pcmcia/xxs1500_ss.c ? ? | ? 13 +------------
> ?6 files changed, 6 insertions(+), 71 deletions(-)

For the db1xxx_ss.c part:
Acked-by: Manuel Lauss <manuel.lauss at googlemail.com>


