bug in pcmcia-modules?
f.j.o at gmx.de
f.j.o at gmx.de
Thu Jan 6 13:03:15 EST 2011
Hello,
sorry for my request, but i got problems to get my pcmcia-cards work.
Background:
I have an old laptop/notebook. There is
1) 1x host bridge: picopower technology national pc87550 system controller
2) 2x cardbus bridges: Texas Instruments PCI1131
3) 1x isa bridge: picopower technology pt86c523 [Vesuvius v3] pci-isa bridge slave
I use this optimized live-cd: puppy wary-500, linux-kernel-2.6.31.14, http://distro.ibiblio.org/pub/linux/distributions/quirky/wary-5.0/
I would like to use two external pcmcia-II-cards, but they don't work:
1) TP-Link TF-5239
2) USB 2.0 cardbus
I suppose, both are 32-bit-cards.
I found out they work under freedos.
I attach output of lspci, lsmod and dmesg.
Is it possible, that there is anywhere a bug (e.g. in pcmcia-modules)?
I tried to get support in a special puppy-linux-forum. But there was nobody who could/did support me. I've read that pcmcia-cards did work with earlier kernels. So I suppose nobody could get the pcmcia-cards work. Would you please so kind to give me support to get my pcmcia-cards work. Then I could write in this forum to other puppy-people, howto to do this...
Franz Obermüller
81508 Munich
Germany
--
Empfehlen Sie GMX DSL Ihren Freunden und Bekannten und wir
belohnen Sie mit bis zu 50,- Euro! https://freundschaftswerbung.gmx.de
-------------- next part --------------
Module Size Used by
snd 56292 0
soundcore 7008 1 snd
usbhid 26944 0
usbcore 143472 1 usbhid
battery 9872 0
evdev 9536 0
serio_raw 5264 0
pcspkr 2348 0
apm 16648 1
fuse 58888 0
aufs 153580 480
nls_iso8859_1 3724 1
nls_cp437 5356 0
squashfs 22480 1
yenta_socket 23928 2
rsrc_nonstatic 11436 1 yenta_socket
nls_cp850 4524 1
-------------- next part --------------
00:00.0 Host bridge: PicoPower Technology National PC87550 System Controller (rev 02)
00:02.0 VGA compatible controller: S3 Inc. 86cM65 [Aurora64V+] (rev 43)
00:04.0 CardBus bridge: Texas Instruments PCI1131 (rev 01)
00:04.1 CardBus bridge: Texas Instruments PCI1131 (rev 01)
00:05.0 ISA bridge: PicoPower Technology PT86C523 [Vesuvius v3] PCI-ISA Bridge Slave
00:06.0 IDE interface: Silicon Image, Inc. PCI0643
-------------- next part --------------
Linux version 2.6.31.14 (root at puppypc) (gcc version 4.3.4 (GCC) ) #1 SMP Mon Oct 25 23:28:59 GMT-8 2010
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000004000000 (usable)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
DMI not present or invalid.
last_pfn = 0x4000 max_arch_pfn = 0x100000
initial memory mapped : 0 - 01800000
init_memory_mapping: 0000000000000000-0000000004000000
0000000000 - 0000400000 page 4k
0000400000 - 0004000000 page 2M
kernel direct mapping tables up to 4000000 @ 7000-b000
RAMDISK: 03d26000 - 03fef88b
0MB HIGHMEM available.
64MB LOWMEM available.
mapped low ram: 0 - 04000000
low ram: 0 - 04000000
node 0 low ram: 00000000 - 04000000
node 0 bootmap 00002000 - 00002800
(8 early reservations) ==> bootmem [0000000000 - 0004000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0001000000 - 00015027c4] TEXT DATA BSS ==> [0001000000 - 00015027c4]
#4 [0003d26000 - 0003fef88b] RAMDISK ==> [0003d26000 - 0003fef88b]
#5 [000009cc00 - 0000100000] BIOS reserved ==> [000009cc00 - 0000100000]
#6 [0001503000 - 0001509000] BRK ==> [0001503000 - 0001509000]
#7 [0000002000 - 0000003000] BOOTMAP ==> [0000002000 - 0000003000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x00004000
HighMem 0x00004000 -> 0x00004000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x00004000
On node 0 totalpages: 16287
free_area_init_node: node 0, pgdat c146f520, node_mem_map c1509000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3967 pages, LIFO batch:0
Normal zone: 96 pages used for memmap
Normal zone: 12192 pages, LIFO batch:1
Using APIC driver default
SMP: Allowing 1 CPUs, 0 hotplug CPUs
No local APIC present or hardware disabled
APIC: disable apic facility
nr_irqs_gsi: 16
Allocating PCI resources starting at 4000000 (gap: 4000000:fbfc0000)
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 11 pages at c158a000, static data 20636 bytes
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16159
Kernel command line: video=640x480 acpi=off pkeys=de
PID hash table entries: 256 (order: 8, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Initializing CPU#0
Initializing HighMem for node 0 (00000000:00000000)
Memory: 56460k/65536k available (3309k kernel code, 8664k reserved, 1250k data, 344k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xc4800000 - 0xff7fe000 ( 943 MB)
lowmem : 0xc0000000 - 0xc4000000 ( 64 MB)
.init : 0xc1474000 - 0xc14ca000 ( 344 kB)
.data : 0xc133b409 - 0xc1473d88 (1250 kB)
.text : 0xc1000000 - 0xc133b409 (3309 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
NR_IRQS:512
Fast TSC calibration using PIT
Detected 266.615 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 533.23 BogoMIPS (lpj=1066460)
Mount-cache hash table entries: 512
Intel Pentium with F0 0F bug - workaround enabled.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 16k freed
weird, boot CPU (#0) not listed by the BIOS.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (533.23 BogoMIPS).
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xeb070, last bus=2
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Interpreter disabled.
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
pci 0000:00:00.0: reg 10 io port: [0x3000-0x301f]
pci 0000:00:02.0: reg 10 32bit mmio: [0x80000000-0x83ffffff]
pci 0000:00:02.0: reg 30 32bit mmio: [0xc000000-0xc00ffff]
pci 0000:00:04.0: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:00:04.1: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:00:06.0: reg 10 io port: [0x1f0-0x1ff]
pci 0000:00:06.0: reg 14 io port: [0x3f4-0x3f7]
pci 0000:00:06.0: reg 18 io port: [0x170-0x17f]
pci 0000:00:06.0: reg 1c io port: [0x374-0x377]
pci 0000:00:06.0: reg 20 io port: [0x500-0x50f]
pnp: PnP ACPI: disabled
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00ff020
PnPBIOS: PnP BIOS version 1.0, entry 0xed000:0x2587, dseg 0xed000
PnPBIOS: 20 nodes reported by PnP BIOS; 20 recorded by driver
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0x100000-0x3ffffff could not be reserved
system 00:00: iomem range 0xe8000-0xfffff could not be reserved
system 00:01: ioport range 0x2f0-0x2f1 has been reserved
system 00:01: ioport range 0x398-0x399 has been reserved
system 00:01: ioport range 0x2f4-0x2f4 has been reserved
system 00:01: ioport range 0x100-0x107 has been reserved
system 00:01: ioport range 0x478-0x47f has been reserved
pci 0000:00:04.0: CardBus bridge, secondary bus 0000:01
pci 0000:00:04.0: IO window: 0x001000-0x0010ff
pci 0000:00:04.0: IO window: 0x001400-0x0014ff
pci 0000:00:04.0: PREFETCH window: 0x4000000-0x7ffffff
pci 0000:00:04.0: MEM window: 0x8000000-0xbffffff
pci 0000:00:04.1: CardBus bridge, secondary bus 0000:05
pci 0000:00:04.1: IO window: 0x001800-0x0018ff
pci 0000:00:04.1: IO window: 0x001c00-0x001cff
pci 0000:00:04.1: PREFETCH window: 0x10000000-0x13ffffff
pci 0000:00:04.1: MEM window: 0x14000000-0x17ffffff
pci 0000:00:04.0: can't find IRQ for PCI INT A; please try using pci=biosirq
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:04.1: can't find IRQ for PCI INT B; please try using pci=biosirq
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io: [0x1000-0x10ff]
pci_bus 0000:01: resource 1 io: [0x1400-0x14ff]
pci_bus 0000:01: resource 2 pref mem [0x4000000-0x7ffffff]
pci_bus 0000:01: resource 3 mem: [0x8000000-0xbffffff]
pci_bus 0000:05: resource 0 io: [0x1800-0x18ff]
pci_bus 0000:05: resource 1 io: [0x1c00-0x1cff]
pci_bus 0000:05: resource 2 pref mem [0x10000000-0x13ffffff]
pci_bus 0000:05: resource 3 mem: [0x14000000-0x17ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 2854k freed
NTFS driver 2.1.29 [Flags: R/W].
msgmni has been set to 115
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12b
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
00:0f: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
brd: module loaded
loop: module loaded
scsi0 : pata_cmd64x
scsi1 : pata_cmd64x
ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0x500 irq 14
ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0x508 irq 15
pata_cmd64x: active 10 recovery 10 setup 3.
pata_cmd64x: active 10 recovery 10 setup 3.
PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
ata1.00: ATA-3: FUJITSU MHC2040AT, 0819, max UDMA/33
ata1.00: 8007552 sectors, multi 0: LBA
pata_cmd64x: active 3 recovery 1 setup 1.
pata_cmd64x: active 3 recovery 1 setup 1.
ata1.00: configured for MWDMA2
pata_cmd64x: active 3 recovery 1 setup 1.
pata_cmd64x: active 3 recovery 1 setup 1.
ata1.00: configured for MWDMA2
ata1: EH complete
scsi 0:0:0:0: Direct-Access ATA FUJITSU MHC2040A 0819 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 8007552 512-byte logical blocks: (4.09 GB/3.81 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda:
pata_cmd64x: active 10 recovery 10 setup 3.
pata_cmd64x: active 10 recovery 10 setup 3.
sda1 sda2 sda3 sda4 < sda5 sda6
psmouse serio1: ID: 10 00 64
sda7 sda8 >
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 344k freed
yenta_cardbus 0000:00:04.0: CardBus bridge found [0000:0000]
yenta_cardbus 0000:00:04.0: no PCI IRQ, CardBus support disabled for this socket.
yenta_cardbus 0000:00:04.0: check your BIOS CardBus, BIOS IRQ or ACPI settings.
yenta_cardbus 0000:00:04.0: ISA IRQ mask 0x06b8, PCI irq 0
yenta_cardbus 0000:00:04.0: Socket status: 30000006
yenta_cardbus 0000:00:04.1: CardBus bridge found [0000:0000]
yenta_cardbus 0000:00:04.1: no PCI IRQ, CardBus support disabled for this socket.
yenta_cardbus 0000:00:04.1: check your BIOS CardBus, BIOS IRQ or ACPI settings.
input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input1
yenta_cardbus 0000:00:04.1: ISA IRQ mask 0x06b8, PCI irq 0
yenta_cardbus 0000:00:04.1: Socket status: 30000020
pcmcia_socket pcmcia_socket1: cs: cardbus cards are not supported.
squashfs: version 4.0 (2009/01/31) Phillip Lougher
aufs 2-standalone.tree-31-20100823
fuse init (API version 7.12)
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: RRIP_1991A
aufs test_add:253:mount[1756]: uid/gid/perm /pup_ro2 0/0/0755, 0/0/01777
udev: starting version 151
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Adding 249944k swap on /dev/sda1. Priority:-1 extents:1 across:249944k
Adding 249848k swap on /dev/sda3. Priority:-2 extents:1 across:249848k
input: PC Speaker as /devices/platform/pcspkr/input/input2
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x220-0x22f 0x278-0x27f 0x330-0x337 0x340-0x35f 0x378-0x37f 0x388-0x38f
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcff: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: excluding 0x220-0x22f 0x278-0x27f 0x330-0x337 0x340-0x35f 0x378-0x37f 0x388-0x38f
pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
Clocksource tsc unstable (delta = 96077672 ns)
end_request: I/O error, dev fd0, sector 1732
Buffer I/O error on device fd0, logical block 216
end_request: I/O error, dev fd0, sector 1777
Buffer I/O error on device fd0, logical block 222
end_request: I/O error, dev fd0, sector 1804
Buffer I/O error on device fd0, logical block 225
end_request: I/O error, dev fd0, sector 1849
Buffer I/O error on device fd0, logical block 231
end_request: I/O error, dev fd0, sector 1732
Buffer I/O error on device fd0, logical block 216
floppy0: sector not found: track 48, head 0, sector 5, size 2
floppy0: sector not found: track 48, head 0, sector 5, size 2
end_request: I/O error, dev fd0, sector 1732
Buffer I/O error on device fd0, logical block 216
floppy0: sector not found: track 49, head 0, sector 14, size 2
floppy0: sector not found: track 49, head 0, sector 14, size 2
end_request: I/O error, dev fd0, sector 1777
Buffer I/O error on device fd0, logical block 222
floppy0: sector not found: track 50, head 0, sector 5, size 2
floppy0: sector not found: track 50, head 0, sector 5, size 2
end_request: I/O error, dev fd0, sector 1804
Buffer I/O error on device fd0, logical block 225
floppy0: data CRC error: track 51, head 0, sector 14, size 2
floppy0: sector not found: track 51, head 0, sector 14, size 2
end_request: I/O error, dev fd0, sector 1849
Buffer I/O error on device fd0, logical block 231
floppy0: sector not found: track 48, head 0, sector 5, size 2
floppy0: sector not found: track 48, head 0, sector 5, size 2
end_request: I/O error, dev fd0, sector 1732
Buffer I/O error on device fd0, logical block 216
FAT: invalid media value (0xf6)
VFS: Can't find a valid FAT filesystem on dev fd0.
FAT: invalid media value (0xf6)
VFS: Can't find a valid FAT filesystem on dev fd0.
floppy0: sector not found: track 49, head 0, sector 14, size 2
floppy0: sector not found: track 49, head 0, sector 14, size 2
end_request: I/O error, dev fd0, sector 1777
Buffer I/O error on device fd0, logical block 222
floppy0: data CRC error: track 50, head 0, sector 5, size 2
floppy0: sector not found: track 49, head 0, sector 14, size 2
floppy0: sector not found: track 49, head 0, sector 14, size 2
end_request: I/O error, dev fd0, sector 1777
Buffer I/O error on device fd0, logical block 222
More information about the linux-pcmcia
mailing list