[Bug 26142] New: "yenta_socket" causes "Transfer error ack signal"
bugzilla-daemon at bugzilla.kernel.org
bugzilla-daemon at bugzilla.kernel.org
Wed Jan 5 15:27:18 EST 2011
https://bugzilla.kernel.org/show_bug.cgi?id=26142
Summary: "yenta_socket" causes "Transfer error ack signal"
Product: Drivers
Version: 2.5
Kernel Version: 2.6.36.2
Platform: All
OS/Version: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: PCMCIA
AssignedTo: linux-pcmcia at lists.infradead.org
ReportedBy: helmut.schlattl at web.de
Regression: No
Created an attachment (id=42442)
--> (https://bugzilla.kernel.org/attachment.cgi?id=42442)
Output from lspci -vvv & lsmod
Performed on Pismo G3 (PPC):
modprobe yenta_socket
The following message repeats for about 4 minutes:
Jan 5 21:10:26 xxxx klogd: Machine check in kernel mode.
Jan 5 21:10:26 xxxx klogd: Caused by (from SRR1=49030): Transfer error ack
signal
After these 4 minutes of flodding the kernel log, the modules seems to properly
load. The kernel log then gives:
Jan 5 21:10:26 xxxx klogd: yenta_cardbus 0001:10:1a.0: pcmcia: parent PCI
bridge window: [mem 0xf3000000-0xf3ffffff]
Jan 5 21:10:26 xxxx klogd: pcmcia_socket pcmcia_socket0: cs: memory probe
0xf3000000-0xf3ffffff: excluding 0xf3000000-0xf37fffff
Jan 5 21:10:26 xxxx klogd: yenta_cardbus 0001:10:1a.0: pcmcia: parent PCI
bridge window: [mem 0x80000000-0xafffffff]
Jan 5 21:10:26 xxxx klogd: pcmcia_socket pcmcia_socket0: cs: memory probe
0x80000000-0xafffffff: excluding 0x80000000-0x807fffff 0xa0000000-0xa07fffff
Jan 5 21:10:26 xxxx klogd: pcmcia_socket pcmcia_socket0: cs: IO port probe
0x100-0x3af: excluding nothing: probe failed.
Jan 5 21:10:26 xxxx klogd: pcmcia_socket pcmcia_socket0: cs: IO port probe
0x3e0-0x4ff: excluding nothing: probe failed.
Jan 5 21:10:26 xxxx klogd: pcmcia_socket pcmcia_socket0: cs: IO port probe
0x820-0x8ff: excluding nothing: probe failed.
Jan 5 21:10:26 xxxx klogd: pcmcia_socket pcmcia_socket0: cs: IO port probe
0xc00-0xcf7: excluding nothing: probe failed.
Jan 5 21:10:26 xxxx klogd: pcmcia_socket pcmcia_socket0: cs: memory probe
0x0c0000-0x0fffff: excluding 0xc0000-0xfffff
Jan 5 21:10:26 xxxx klogd: pcmcia_socket pcmcia_socket0: cs: memory probe
0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa00fffff
Jan 5 21:10:26 xxxx klogd: pcmcia_socket pcmcia_socket0: cs: memory probe
0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
Jan 5 21:10:26 xxxx klogd: pcmcia_socket pcmcia_socket0: cs: IO port probe
0xa00-0xaff: excluding nothing: probe failed.
Jan 5 21:10:26 xxxx klogd: pcmcia_socket pcmcia_socket0: pccard: PCMCIA card
inserted into slot 0
Jan 5 21:10:26 xxxx klogd: pcmcia_socket pcmcia_socket0: cs: memory probe
0xf3800000-0xf3ffffff: clean.
Jan 5 21:10:26 xxxx klogd: pcmcia 0.0: pcmcia: registering new device
pcmcia0.0 (IRQ: 58)
Jan 5 21:10:26 xxxx klogd: scsi6 : pata_pcmcia
etc...
Then everythings seems to work fine.
My system:
/proc/cpuinfo:
processor : 0
cpu : 7410, altivec supported
temperature : 14-16 C (uncalibrated)
clock : 550.000000MHz
revision : 1.4 (pvr 800c 1104)
bogomips : 49.93
timebase : 24966218
platform : PowerMac
model : PowerBook3,1
machine : PowerBook3,1
motherboard : PowerBook3,1 MacRISC2 MacRISC Power Macintosh
detected as : 70 (PowerBook Pismo)
pmac flags : 0000001f
L2 cache : 1024K unified
pmac-generation : NewWorld
Memory : 640 MB
/proc/ioports:
00000000-007fffff : /pci at f2000000
00000000-00000fff : Legacy IO
00001000-000011ff : PCI CardBus 0001:11
00001200-0000120f : pcmcia_socket0
00001200-0000120f : pcmcia0.0
00001400-000015ff : PCI CardBus 0001:11
00802000-01001fff : /pci at f0000000
00802400-008024ff : 0000:00:10.0
ff7fe000-ffffdfff : /pci at f4000000
ff7fe000-ff7fefff : Legacy IO
The lspci and lsmod output is attached.
--
Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.
More information about the linux-pcmcia
mailing list